Electronic Accessories
For difficult installation situations with little available space, especially in N-gauge, we recommend our miniature loudspeaker with a footprint of just 10mm x 12mm. This speaker was selected by our audio engineers after extensive testing because it offers a good compromise between acceptable bass reproduction and volume. This ‘dwarf’ produces an astonishingly high sound pressure level - when combined with the appropriate sound chamber. The set includes four sound chambers of different heights, resulting in a total height (with mounted speaker) of 11mm, 8mm, 6mm or 5mm. Choose the largest sound capsule that you can accommodate. Adhesive tape is provided on the speaker itself for simple, airtight mounting. The solder connection is made via a short piece of flexible printed circuit board.
For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm.
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
This speaker module offers extremely good performance data with moderate dimensions. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves high quality bass reproduction and achieves a considerable sound pressure even in the highs and mids. It was specially developed for American Scaletrains (SXT) diesel locomotives as a replacement for the factory-fitted speakers: It fits without adapting the locomotive. The speaker fits perfectly with our LokSound 5 decoders.
This adapter board can be docked to all decoders with a Next18 connection and offers a PluX12 interface on the locomotive side.
Bar spotlights with 5 LEDs each. Ready for connection to 12-16 V, AC/DC voltage. The connections using enamelled copper wires on both sides allow to …
Bar spotlights with 5 LEDs each. Ready for connection to 12-16 V, AC/DC voltage. The connections using enamelled copper wires on both sides allow to …
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them …
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them …
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or i…
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or i…
Two traffic lights with LED light signals in the colours green, yellow and red without control. Equally suitable for Car System, Car System Digital o…
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was installed there, but the required length for a LokSound 5 decoder was not taken into account.
This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed.
This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed.
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows:
For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm.
This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a LokSound 5 Nano or LokPilot 5 Nano can be easily installed in older locomotives that only provide a PluX16 interface (e.g. some Fleischmann H0 locomotives or Piko N or TT locomotives)
This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids.
When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: