Just arrived
Model The Märklin 7252 high piers are 6 mm high and are ideal for building ramps with an even gradient from pier to pier. They allow routes on your H0 layout to be raised realistically and designed flexibly. Highlights Height: 6 mm – ideal for gentle gradients Suitable for building ramps with Märklin C track and K track A precise fit for holding the track securely Can be extended with additional pier sets for greater heights
In stock, shipped within 1-3 days
Model The Märklin 7253 high piers are 30 mm high and are used for building ramps with an even gradient from pier to pier. They allow you to raise routes on your H0 layout stably and to create realistic alignments. 30 mm high. Highlights Height: 30 mm – ideal for medium gradients Suitable for Märklin C track and K track A secure hold and simple mounting Can be combined with additional pier sets for greater heights
In stock, shipped within 1-3 days
3 mm high. To be used only in conjunction with 7250.
In stock, shipped within 1-3 days
Straight track G1. Length 230 mm (standard length).
In stock, shipped within 1-3 days
Revell Color is a synthetic resin enamel paint that does not attack the plastic surface of plastic models. The 14 ml paint can, which is popular with many hobbyists, can also be used to paint many other materials. All colors - except signal color - can be mixed with each other and can be diluted with 'Revell Color Mix'. This means that the paint can be applied not only with a brush, but also with a spray gun. The cleaning agents used are 'Revell Painta Clean' for the brushes and 'Revell Airbrush Clean' for the spray gun.
In stock: 5 on the shelf, shipped within 1-3 days
LokPilot 5 micro DCC, Next18, gauge N, TT The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of 13.0mm x 9.2mm, but have 2 additional function outputs. Modes The LokPilot 5 micro DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically. It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255. The LokPilot 5 micro DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5 micro DCC equipped with an amazing number of function outputs. The variants with 6-pin or 8-pin Wiring harnesses offer 4 amplified function outputs, each with 180mA output current and two logic level outputs. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs available. All important lighting effects are available. The brightness of each output can be adjusted separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The motor control of the LokPilot 5 micro DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10 CVs which can be adjusted for difficult cases. The unique "Autotune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors. Safety A PowerPack to bypass dirty track can be fitted to the LokPilot 5 micro. Protection Of course, the motor output and the function outputs are against overload protected. We want you to enjoy your decoder for as long as possible. Click the image for a bigger view. Art.No. Delivery 59820 LokPilot 5 micro DCC, 8-pin NEM652, gauge N, TT 59824 LokPilot 5 micro DCC, PluX16, gauge N, TT 59826 LokPilot 5 micro DCC, 6-pin NEM651, gauge N, TT 59827 LokPilot 5 micro DCC, 6-pin Direkt, gauge N, TT 59828 LokPilot 5 micro DCC, Next18, gauge N, TT 59857 LokPilot 5 micro DCC, 6-pin Direkt gewinkelt, gauge N, TT
In stock: 4 on the shelf, shipped within 1-3 days
Swiss alternate flashers for level crossings in N scale, pack of two. The triangular sign has a red border, a white inner line and a black face, and carries two round lights fitted with black hoods. The pole is painted in alternating red and white sections and stands on a light grey cylindrical base. In the product photograph both lights show red.
In stock: 4 on the shelf, shipped within 1-3 days
Swiss alternating flasher for level crossings in H0 scale, announced by the maker as a set of two units. The triangular sign combines a red border, a white inner line and a black field; two red lights sit side by side in its lower part, each under a black hood. The mast is painted in alternating red and white bands, and the drawing adds a dark foot followed by a light-coloured ground socket. The photograph shows both lights lit red.
In stock: 4 on the shelf, shipped within 1-3 days
DB distant signal of the 1969 H/V system in H0. The hexagonal black signal screen carries two hoods with two lights each, plus a single light under a small hood on the left-hand side. The light green lattice mast has a ladder, a platform with railing, a rectangular plate with a diagonal cross, a white cabinet at its foot and a white base with fixing pin. The inset diagram shows yellow and green at the top, yellow and green below, and that side light in white.
In stock: 4 on the shelf, shipped within 1-3 days
SBB main signal, H0 scale. The black screen with a light-coloured border carries four stacked hooded lenses; a light-coloured railed frame is fixed to its right. The silver-grey lattice mast with step irons stands, with a small box at its foot, on a white rectangular base plate. The lenses are unlit in both photographs.
In stock: 4 on the shelf, shipped within 1-3 days
Radius 437.5 mm. 30° curve. Width 64 mm. For holding curved C tracks with radius R2. 1 ramp section corresponds to the 24230 track.
In stock: 4 on the shelf, shipped within 1-3 days
LokPilot 5 micro DCC Direct Kato USA »Blank decoder«, gauge: N The LokPilot 5 micro DCC Direct Kato USA has been specially developed for installation in N scale locomotives of the Kato USA brand. This decoder can be easily installed in most American diesel locomotives of this manufacturer instead of the analog board installed as standard. The LokPilot 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder. Modes The LokPilot 5 micro DCC Direct Kato USA is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 micro DCC Direct Kato USA Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or DC voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations. The LokPilot 5 micro DCC Direct Kato USA can be used on analog DC. The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions Despite its compact dimensions, the LokPilot 5 micro DCC Direct Kato USA is equipped with an enormous number of function outputs. Two directly soldered SMD LEDs are designed for front and rear head lighting. For older models, two 3mm LEDs can be soldered and controlled separately (one at each end resistor protected). Three further powered function outputs (non-resistor protected) are also available. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 micro DCC Direct Kato USA has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokPilot 5 micro DCC Direct Kato USA decoder delivers up to 0.9A motor power. Operational reliability A PowerPack can be connected to the LokPilot 5 micro DCC Direct Kato USA on request to bridge dirty rail sections using the logic level output AUX6. Protection Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible. Art.No. Delivery 59741 LokPilot 5 micro DCC Direct Kato USA »Blank decoder«, gauge: N
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Class Be 4/6 electric locomotive of the Swiss Federal Railways (SBB). Rebuilt version until retirement. Basic fir green paint scheme with traffic gray running gear. With sleeve buffers. Cab doors on the sides and ends partially welded shut and without walkover plates. With sanding gear, an authorization to proceed signal and Integra Signum magnets. Cooling coils on the sides with 11 vertical brackets. Locomotive running number 12323. The locomotive looks as it did in the early 1970s. Model With an mfx+ digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Both driving wheels and the jackshaft in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and 1 white marker light (Swiss light changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. For running light, the lighting can be switched to 1 red marker light. Authorization to proceed signal can be controlled separately digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double A light function. Additional cab lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and machinery room interior details. With sanding gear on the driving wheel groups. Detailed roof equipment with heating resistors, roof wiring, insulators, lightning arrestor coils and roof walkways. Minimum radius for operation 360 mm. Brake hoses, imitation screw couplings and steps are included. Length over the buffers 18.9 cm. Highlights Prototypical changes in shape, such as cab doors on the ends and sides partially welded shut Changed version with 11 cooling coil brackets Highly detailed metal version Spielewelt mfx+ digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Additional red authorization to proceed signal can be controlled digitally With a buffer capacitor for bridging short sections without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 3 on the shelf, shipped within 1-3 days
Model Container car in the well-known banknote design of the AC/DC single Moneytalks from 1990. Relex couplers. Car length 11.5 cm. DC wheel set E700580 available separately. Highlights A reprint of the Moneytalks banknote is included with the car Reasonably priced supplement to the already released AC/DC models One-time series ©2026 Leidseplein Presse B.V. Under License to Perryscope Productions LLC Note You can find the matching locomotive under item number 39966 in the Märklin H0 assortment.
In stock: 3 on the shelf, shipped within 1-3 days
Basketball hoops in N scale. The light grey post is cranked over towards the backboard; the white board has a black surround and a black target rectangle, and the ring is orange. No net is fitted. The set contains two hoops.
In stock: 3 on the shelf, shipped within 1-3 days
Ladder set in H0 scale, supplied as photo-etched frets. It comprises leaning ladders in two lengths, A-frame stepladders, step units with a platform and safety hoop, and a low step stool with a ribbed tread; the parts are attached to their frames and are detached for assembly. Finishes range from silver to light brown and dark grey, the long ladders resting on a moulded transverse foot.
In stock: 2 on the shelf, shipped within 1-3 days
Six beehives made of stacked orange supers, each capped with a flat silver roof of metallic appearance. The stack height varies from hive to hive and every super carries a moulded oval entrance slot. Coloured accessory for H0 scale.
In stock: 2 on the shelf, shipped within 1-3 days
Wire mesh fence topped with barbed wire, in H0 scale. The fine diamond mesh is held by a top and bottom rail and divided into bays by full-height posts; three strands of barbed wire run above it. One bay carries a V-shaped brace. The illustration is a line drawing.
In stock: 2 on the shelf, shipped within 1-3 days
Two Swiss track bells in H0 scale. A cylindrical body is topped by a conical cap carrying a domed cover with a knob, with two fittings facing each other on the sides. The body stands on a ringed shaft ending in a rectangular base plate. The parts come painted matt silver grey.
In stock: 2 on the shelf, shipped within 1-3 days
Six temporary fence panels in H0 scale. The mesh panels have rectangular openings, closer together at the bottom, and each stands on two separate concrete feet with twin slots. The illustration is a 3D rendering in plain white.
In stock: 2 on the shelf, shipped within 1-3 days
LokSound 5 DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: 0, H0 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it. Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Betrieb unter DCC mit RailComPlus®, M4, Motorola® und Selectrix® 32 Funktionen schaltbar (abhängig von der Zentrale) 32-Bit-Prozessor Digitaler Class-„D“-Verstärker mit bis zu 3 W Leistung (LokSound 5 XL: 13 W) Jeder Kanal in 16-Bit-Auflösung und 31250 kHz Samplerate Geräuschspeicher mit 128 Mbit Kapazität Motorregelung mit 50 kHz Taktfrequenz RC-Servos und Susi-Module ansteuerbar 3 neue, individuell einstellbare Bremsregler Zweistufige Schwerlast-Simulation Updatefähig mit ESU-LokProgrammer LokSound 5 Universal-Sound-Decoder für die Spurweiten H0 und Spur 0 Motorstrom 1,5 A Je nach Schnittstelle bis zu 12 verstärkte Funktionsausgänge für Sonderfunktionen (Total: Bis zu 15 Ausgänge) 10 Soundkanäle gleichzeitig abspielbar Ab Werk mit 11x15-mm-„Zuckerwürfel“-Lautsprecher mit anpassbarem Schallkapsel-Set PowerPack-Speicherkondensator optional anschließbar Abmessungen: 30 mm x 15,5 mm, Höhe abhängig von Schnittstelle 8-pin NEM 652 PluxX22 6-pin NEM 651 21MTC 21MTC MKL Click the image for a bigger view. Instruction manual Art.No. Delivery 58420 LokSound 5 DCC "blank decoder", 8-pin NEM652, gauge: 0, H0 Only available at ESU LLC! 58429 LokSound 5 DCC "blank decoder", 21MTC NEM660, gauge: 0, H0 Only available at ESU LLC! 58410 LokSound 5 DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: 0, H0 58412 LokSound 5 DCC/MM/SX/M4 "blank decoder", PluX22, with speaker 11x15mm, gauge: 0, H0 58419 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC NEM660, with speaker 11x15mm, gauge: 0, H0 58449 LokSound 5 DCC/MM/SX/M4 "blank decoder", 21MTC "MKL", with speaker 11x15mm, gauge: 0, H0
In stock: 2 on the shelf, shipped within 1-3 days
Pressurised gas tank wagon, type Zags, operated by the Deutsche Bundesbahn. Version without sunroof
In stock: 2 on the shelf, shipped within 1-3 days
Black is the new colour scheme of the Citroën 2 CV with an attached boot. True-to-scale, faithful miniature model for adult collectors.
In stock: 2 on the shelf, shipped within 1-3 days
The Swiss national airline is celebrating the arrival of its first Airbus A350 with an elaborate and lovingly detailed special livery. The many individual motifs tell stories from all parts of the country, covering topics ranging from nature, culture, and sports to Switzerland's diverse and long history. The livery features important cities such as Zurich, Bern, Basel, Geneva, Lucerne, Montreux, Locarno, St. Moritz, and Wengen, among others. Additional illustrations such as the marmot, Helvetia, and William Tell's pierced apple complete the work of artist Frédéric Siegel and inspire a desire to experience Switzerland's diversity.
In stock: 2 on the shelf, shipped within 1-3 days