Track System
Electric three-way turnout with electric turnout mechanisms. Length of the straight track 112.6 mm, branch angle 15° each.
Three-way turnout, symmetrical, manually operated. Length 200 mm (standard length), branch angle, 22.5° each, branch radius 502.7 mm each. The two manual turnout mechanisms can be replaced by the electric turnout mechanism 61195. For digital operation is the special turnout decoder 61196 available. Due to the electrical requirements of this type of turnout it is delivered with factory installed polarization.
Point motors can be clipped onto the three-way point and switched as a "thinking" point. The two curved exits correspond to the track 9136 (15°).
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model Length 1/1 = 180 mm. Enables the transition from plastic to metal tracks. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
Model The track extension set B1 can be used to expand the track plan of the current starter sets. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 2 x 14500 straight track 112.6 mm. 2 x 14503 straight track 17.5 mm. 8 x 14504 straight track 104.2 mm. 4 x 14594 straight track 126.3 mm. 1 x 14518 curved track R 5 - 15°. 1 x manual uncoupler track (not available separately). 2 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. 1 x 14591 buffer stop 50.0 mm. Example for expansion: 11161 with 14321 150 x 60 cm / 60" x 24" Recommended baseboard size for the layout with the starter set and the B1 and B2 extensions.
Model The track extension set B2 expands the track plan of the current starter sets that have already been fitted with the track extension set B1. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 1 x 14500 straight track 112.6 mm. 4 x 14504 straight track 104.2 mm. 2 x 14593 straight track 108.4 mm. 2 x 14594 straight track 126.3 mm. 12 x 14510 curved track R 2a – 30°. 1 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. Example for expansion: 11161 and 14321 with 14322 (external dimensions: approx. 139 x 53 cm) Recommended baseboard size: 150 x 60 cm / 60" x 24"
ROCO LINE track ballast. Matches roadbed track in terms of color and grain. Genuine stone ballast.
Model Snap-in end piece for the ballast bed of the transparent C tracks from 20196 and 20197. For track ends, sidings, presentation bases and display cases. Transparent version ideal for presentation purposes. Length 16.5 mm. Pack of 10 pieces. Highlights End pieces for C track (10 pieces) in a transparent version, ideal for presentation purposes Simple click system - sturdy assembly without tools
Model DB standard design, 23 m. Suitable for conventional and digital operation. Remote-controlled turntable bridge with a built-in motor. Digital control exclusively with the Mobile Station 2 and the Central Station 2 and 3 (not included). Particularly convenient control with the Central Station 2 and 3 by means of track pre-selection or with various digital central units using the DCC digital format. Function: turning right/left. Pit for recessed installation in the layout. 6 track connections for C tracks, to be fitted at any position. Exit angle in the 12° C track grid. Can be used with the 24922 transition track to K track and with the 24951 transition track to M track. Can be expanded to a maximum of 30 track connections in a 12° grid with the 74871 extension. A separate power supply for the exit tracks is required. Outside diameter with one exit track opposite another 378 mm. Diameter of the pit without exit tracks 278 mm. Bridge length 263 mm. Matches the 72887 roundhouse. Various sound functions that can be controlled. Turntable operator's cabin and outside lamp lit with LEDs, can be controlled. New colour scheme compared to the previous 74861 turntable, e.g. "blanking plugs" in the colour scheme of the C track with the wood planks additionally represented. Highlights Sound Operator's cabin with LED lighting
Model The Märklin 74030 centre conductor insulator is the ideal accessory for all Märklin C tracks in H0. It can be used to separate circuits and signal sections reliably from one another – perfect for braking and stopping sections or for individual signal control. The set contains 8 insulators for setting up 4 insulating points, which can be fitted quickly and precisely. This allows you to design your track plan flexibly and to optimise realistic operation on your model railway. For separating circuits or signal sections. Contains 8 pieces for 4 insulating points. Highlights Suitable for the Märklin C track, H0 gauge. 8 insulators for 4 insulating points Simple to use and precise separation Ideal for braking and signal sections
Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions.
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 2 x 1/2 = 2 x 90 mm. Continuous contact via wheelsets. With an insulated rail section for track occupancy detection when trains pass over it. The contact section can be extended with straight and curved tracks. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung track planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Reliable electrical operation thanks to the proven centre conductor For anyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
Triggers a switching pulse while running axles with a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions.
Crossover 15°, left hand crossing, length 111 mm. The crossing tracks are isolated from each other so that two independent power circuits can cross each other. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm.
Crossover 15°, right hand crossing, length 111 mm. The crossing tracks are isolated from each other so that two independent power circuits can cross each other. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm.
Crossover 30°, length 115 mm. The crossover 9161 is fitted with check rails and frogs. The crossing tracks are isolated from each other. The length of the diagonally crossing track measures 115 mm (= 2 x 9102 "diagonal" track).
Centrepiece for double crossover DGV15 with bedding. Length 115 mm, crossing angle 30°. Suitable in combination with 15° turnouts/diamond crossings with slips. The railroad lines that cross each other are not electrically isolated.
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model Crossing angle 22° 30'. Length of the tracks 168.9 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model Crossing angle 14° 26'. Length of the tracks 225 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model Crossing angle 45°. Length of the tracks 90 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
R2 = 437.5 mm / 24.3° (point curve). Contents: 1 piece.