Accessories
DC Clear 3 V/15 mA
In stock, shipped within 1-3 days
Height adjustable universal coupling. Due to design considerations the buffer separation will increase approx. 2 mm in most rolling stock when using these coupling devices. Content: 12 pieces/package.
In stock, shipped within 1-3 days
Replacement couplings for models 1255, 1256, 1257 and 1016, pack of 10.
In stock, shipped within 1-3 days
Highlights Optimised tractive effort: increases the traction of Märklin H0 locomotives on straight track and on gradients High quality: robust rubber compound for a long service life and reliable performance Practical set of 10: ideal for fitting several vehicles or as a replacement stock for future maintenance Product description The Märklin 7153 traction tyres (10 pieces) are the ideal choice for increasing the tractive effort of your Märklin H0 locomotives. Made of a high-quality rubber compound, they provide optimum traction, even with heavy trains or on steep sections of track. The practical set of 10 is perfectly suited to fitting several vehicles or as a durable replacement stock. Easy fitting of the Märklin 7153 traction tyres Replacing the traction tyres is straightforward and quickly done, so your locomotive is back running at full tractive effort in no time: 1. Carefully pull the old traction tyre off the driving axle. 2. Thoroughly clean the groove of the driving axle to remove dirt or residue. 3. Fit the new traction tyre and position it evenly in the groove. After a few simple steps your locomotive is ready for use again and reliably handles even heavy trains or gradients.
Content: 10 pc. (CHF 0.57 / 1 pc.)
In stock, shipped within 1-3 days
Cable plugs. Adapters for connecting three single cables with flat connector system (10603).
In stock, shipped within 1-3 days
Contacta Liquid – precision and strength for your model building projects The Revell Contacta Liquid liquid glue is the perfect partner for model building enthusiasts who expect the highest precision and lasting stability. With its unique, super-thin formula, this adhesive enables extremely fine dosage and an invisible connection of the components. Simply applied to the inside of the plastic components with the integrated brush, the Contacta Liquid fuses the parts and thus ensures a permanently strong connection. Ideal for demanding model building projects where millimeter-precise details and clean results are important. The big advantage: Thanks to the precise application, the glue remains invisible while the models retain their aesthetic perfection. Scope of delivery 18 g Revell Contacta Liquid liquid glue Integrated precision brush for fine application Special features Super-thin liquid adhesive for precise dosing to the millimeter Welding effect for invisible and extremely stable connections Easy to apply thanks to the integrated precision brush Ensures an invisible adhesive seam and clean results Perfect for detailed models and delicate components Background information The Revell Contacta Liquid liquid adhesive was developed specifically for the needs of demanding model builders who value precision and durability. The principle of “welding” plastic parts is based on Revell’s decades of experience in model making. Due to its liquid consistency, the adhesive penetrates deep into the connection points and fuses the parts on a molecular level, enabling an extremely stable connection. Perfect for building plastic models where every detail counts.
In stock, shipped within 1-3 days
Model Can be retrofitted to all C track points with an electric point motor. Digital formats mfx, Motorola, and DCC. Connection by means of plug contacts. The address can be set both with the coding switch (MM 1–320, DCC 1–511) and via CV (MM 1–320, DCC 1–2044) using the programming track. A point lantern can also be controlled; soldering skills are required for this connection. A digital decoder can be fitted to the electric point motor at the same time or later. The decoder is simply connected with plug contacts and can be addressed individually for each point (address 1 to 256). No tools or special knowledge are required for the installation. The digital power supply can be taken directly from the traction current contact on the point. In this way you get a ready-made digital point that is immediately operational even on portable layouts. Highlights Can be retrofitted to all Märklin C track points with an electric point motor Supports the mfx, Motorola, and DCC digital formats Simple installation by means of plug contacts, no special tools needed Address individually adjustable (MM 1–320 / DCC 1–2044), point lantern can be controlled
In stock, shipped within 1-3 days
DC Plug-in bulb with locating lugs Transparent M 60.015 19 V/50 mA
In stock, shipped within 1-3 days
For converting most Märklin H0 locomotives with a drum commutator motor to the five-pole high-efficiency motor. Consisting of a high-efficiency motor and installation material.
In stock, shipped within 1-3 days
cable harness with 6-pin plug according to NEM 651, DCC colour, length 300mm Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price. If the loco in question features no digital interface and you don’t want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the decoder. That’s how the Pro’s do it!
In stock, shipped within 1-3 days
DC Clear Black wire 16 V/30 mA
In stock, shipped within 1-3 days
Spare part: centre buffer, pack of 20.
In stock, shipped within 1-3 days
DC Long 16 V/30 mA
In stock, shipped within 1-3 days
16 V/30 mA Clear M 3.0 x 0.35 mm
In stock, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder mLD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for retrofitting analogue and digital locomotives. The märklin LokDecoder mLD3 supports the mfx, MM1, MM2 and DCC digital formats.
In stock, shipped within 1-3 days
Close-coupling conversion set. To fit to older wagons which do not have close-coupling. Content: 2 close-coupling mechanisms and 2 coupling heads 6570 (adjustable height).
In stock, shipped within 1-3 days
For locomotives 81281, 88040, 88062, 88063, 88080, 88081, 88082, 88090, 88091, 88120, 88121, 88181, 8820, 88201, 88223, 88290, 88321, 88410, 88433, 88463, 88464, 88481, 88482, 88490, 88491, 88501, 88520, 88523, 88524, 88536, 88541, 8856, 88580, 88583, 88584, 88606, 88630, 88670, 88671, 88690, 88691, 88693, 88694, 88695, 88712, 8878, 8879, 88812, 88836, 88841, 88851, 88852, 88853, 88871, 88881, 88882, 88885, 88886, 88887, 8889, 88893, 8896 and 88991.
In stock, shipped within 1-3 days
Replacement couplings for items 3269, 3281 and 3282. Pack of 10.
In stock, shipped within 1-3 days
DC Clear 16 V/35 mA
In stock, shipped within 1-3 days
For vehicles with NEM 362 coupling socket.
In stock, shipped within 1-3 days
To activate the switch contacts 6435 and 9425 or the switching track 9115. To fix onto the underside of vehicles. Surface area 7 x 7 mm, height 5 mm.
In stock, shipped within 1-3 days
20 contacts, can be separated at any point For use as pin and tubular socket Spacing 2.54 mm For all systems
In stock, shipped within 1-3 days
Spare brushes and springs.
In stock, shipped within 1-3 days
Relay 1 A miniature relay, 16 volts With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load.
In stock, shipped within 1-3 days