Track Accessories
Model The Märklin 7252 high piers are 6 mm high and are ideal for building ramps with an even gradient from pier to pier. They allow routes on your H0 layout to be raised realistically and designed flexibly. Highlights Height: 6 mm – ideal for gentle gradients Suitable for building ramps with Märklin C track and K track A precise fit for holding the track securely Can be extended with additional pier sets for greater heights
In stock, shipped within 1-3 days
Model The Märklin 7253 high piers are 30 mm high and are used for building ramps with an even gradient from pier to pier. They allow you to raise routes on your H0 layout stably and to create realistic alignments. 30 mm high. Highlights Height: 30 mm – ideal for medium gradients Suitable for Märklin C track and K track A secure hold and simple mounting Can be combined with additional pier sets for greater heights
In stock, shipped within 1-3 days
3 mm high. To be used only in conjunction with 7250.
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 203 mm. Intended for curved track with a radius of 515 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 3.18 / 1 pc.)
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 142 mm. Intended for curved sections with a radius of 360 mm (C track, K track, M track). 16 contact wires of 22.5° each are needed for one circle. Pack of 5 pieces. Note The contact wires of the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The contact wire pieces are prefabricated and very easy to fit.
Content: 5 pc. (CHF 2.98 / 1 pc.)
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 172.5 mm. Intended for curved track with a radius of 437.5 mm (C track, M track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 2.98 / 1 pc.)
In stock, shipped within 1-3 days
Model Round mast with a metal bracket arm. Base with a mounting screw and click connection. Additional base as a holder on the C track. Height 100 mm. Pack of 5 pieces. Note The masts of the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is fitted into the matching base for C track or K track by means of a click connection.
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 252.7 mm. Intended for curved track with a radius of 643.6 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 4.18 / 1 pc.)
In stock, shipped within 1-3 days
This high-quality base plate is the ideal basis for the stable assembly of your model railway layout. It is perfectly suited to raising or aligning bridge piers, ramps and other structures – and thus makes realistic height profiles and the creation of several levels possible. Whether for approach ramps, straight sections of line or complex scenic transitions – with this plate you create a solid foundation for creative, prototypically detailed model landscapes. 2.5 mm high. Can be used as a foundation.
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 228 mm. Intended for curved track with a radius of 579.3 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 3.78 / 1 pc.)
In stock, shipped within 1-3 days
Sleeper end piece for flexible track. To enhance the appearance of flexible track ends which have been cut to size, ensuring a correct sleeper spacing. 24 pc./pack.
In stock, shipped within 1-3 days
Model Lattice mast and bracket arm made of metal. Base with a mounting screw and a click connection. Additional base as a mounting for the C track. Height 100 mm. Pack of 5 pieces. Highlights The masts for the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is inserted by means of a click connection into the matching base for C track or K track
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 167.5 mm. Intended for curved track with a radius of 424.6 mm (K track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 2.98 / 1 pc.)
In stock, shipped within 1-3 days
For compensating for individual track lengths. One end with the normal suspension, the other end with mountings for a cut-to-length catenary wire with an open end. Precise length adjustment during assembly. Pack of 5 pieces.
Content: 5 pc. (CHF 4.78 / 1 pc.)
In stock, shipped within 1-3 days
12 pieces per pack. For electrical isolation of track sections, and joining tracks together.
In stock, shipped within 1-3 days
Made of welded steel wire. Length approximately 142 mm. Intended for the transition from the old Märklin catenary to the new catenary system. Pack of 3 pieces.
Content: 3 pc. (CHF 4.97 / 1 pc.)
In stock, shipped within 1-3 days
As realistic as real track ballast! Ballast and stones play a very important role in the realistic design of model landscapes. Track ballast is usually mined regionally and therefore reflects the color of the rocks and stones of this region. With the PROFI ballast types from NOCH you can, among other things, ballast your track beds extremely realistically. With a grain size of 0.5-1.0 mm and a content of 250 g, this ballast is ideal for realistic track bedding. The natural coloring ensures an authentic appearance for your model landscape. brown, 250g
In stock, shipped within 1-3 days
Model Retrofit set for C track points in an optimised version. Twin-coil motor with end shut-off. Operation by means of a control panel (e.g. 72720) or a digital decoder (74462). Feedback possible with the 7271/72710 control panel. On points the electric motor can be installed and connected afterwards quite easily without special tools. The motor sits concealed in the ballast bed; below-baseboard mounting is not required. It is encapsulated to protect it from dirt and is protected against overloading by end shut-off. Control is by means of the normal control panel, the control panel with feedback, or by means of a digital decoder. The manual operating lever can remain functional. Highlights Compatible with Märklin C track points Electric motor for convenient control Easy mounting under the points Suitable for analogue and digital control Long-lasting, robust construction Ensures precise, fast changes of direction Ideal for small and complex track plans Note Note: A special point motor is already installed in the 24624 double slip point.
In stock, shipped within 1-3 days
Metal rail joints. Transitional rail joints from assortment 6000 to assortment 6100. To connect the flexible tracks 6106/6109. (20 pieces)
In stock, shipped within 1-3 days
Sleeper end piece, matches H0e track 32200.
In stock, shipped within 1-3 days
geoLine general purpose turnout mechanism to convert each geoLine turnout from manual operation to electrical operation. Suitable for turnout decoder 61196.
In stock, shipped within 1-3 days
Model Bracket arm made of steel wire with a holder for the support wire and the steady wire. To be installed on line masts and tower masts. Pack of 5 pieces. Note Metal bracket arms for good electrical contact.
Content: 5 pc. (CHF 3.18 / 1 pc.)
In stock, shipped within 1-3 days
Track end piece. To finish of the tracks properly in the case of track bumpers, display case track etc. Content: 6 units/pack.
In stock, shipped within 1-3 days
Transition rail joiners to connect Scale H0 tracks of 2.5 mm rail profile height with tracks of 2.1 mm rail profile height. (20 pieces) Perfect for connecting FLEISCHMANN PROFI track to ROCO LINE track. By simply exchanging the standard mounted rail joints to the transitional rail joints 6437 you can adjust the turntable and the expansion set 6155 to track layouts of 2.1 mm high rail profiles.
In stock, shipped within 1-3 days