Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessories

Filter products
Cranked scraper, spring blade approx. 9.5 cm
Spörle-Formen 0119
Cranked scraper, spring blade approx. 9.5 cm

Offset scraper with a spring blade, approx. 9.5 cm.

Regular price: CHF 4.90

On order, shipped within 10-15 days

Keraflott casting compound 1 kg white colour
Spörle-Formen 0201
Keraflott casting compound 1 kg white colour

Keraflott casting compound 1 kg white colour. Advantages over plaster: Provides a more detailed reproduction. Dries faster. Forms fewer bubbles. Can be poured in a radius of up to 90°.

Regular price: CHF 10.50

On order, shipped within 10-15 days

Concave bending form
Spörle-Formen 0501
Concave bending form

Concave bending form With the bending forms you can use, for example, wall forms (e.g. 6009-6019) to cast not only straight sections but also those with a radius (convex or concave). The wall forms must be ordered separately. 1. For casting you do not need plaster but Keraflott (ceramic casting medium). Keraflott sets faster and is more stable afterwards. 2. Prepare the form with a flow improver and lay it flat. 3. Prepare the casting mixture to be quite fluid and pour it into the form. 4. When the surface has dried slightly after a few minutes (the casting medium can no longer run out), place it on its convex or concave base and gently press the surface with a spatula or your hand, smoothing it out. 5. Weight the form on the side or in the middle using aids (a piece of wood, etc.) so that it stays in the curved shape on its own. 6. After about 1 hour you can demould the wall and let it dry. 7. After about 2-3 hours you can continue processing the form. Colouring should only begin the following day.

Regular price: CHF 22.75

On order, shipped within 10-15 days

Bending form convex
Spörle-Formen 0502
Bending form convex

Bending form: convex. With the bending forms you can use, for example, wall forms (e.g. 6009-6019) to cast not only straight sections but also those with a radius (convex or concave). The wall forms must be ordered separately. 1. For casting you do not need plaster but Keraflott (ceramic casting medium). Keraflott sets faster and is more stable afterwards. 2. Prepare the form with a flow improver and lay it flat. 3. Prepare the casting mixture to be quite fluid and pour it into the form. 4. When the surface has dried slightly after a few minutes (the casting medium can no longer run out), place it on its convex or concave base and gently press the surface with a spatula or your hand, then smooth it out. 5. Weight the form on the side or in the middle using aids (a piece of wood, etc.) so that it stays in the curved shape on its own. 6. After approx. 1 hour you can demould the wall and let it dry. 7. After approx. 2-3 hours you can further process the form. Colouring should only begin the following day.

Regular price: CHF 22.75

On order, shipped within 10-15 days

Build with plaster, printed version
Spörle-Formen 0902
Build with plaster, printed version

Build with plaster, printed version. Instructions for building with plaster.

Regular price: CHF 6.35

On order, shipped within 10-15 days

House construction assembly instructions, printed version
Spörle-Formen 0903
House construction assembly instructions, printed version

Assembly instructions for house construction, printed version. Instructions for building houses with plaster.

Regular price: CHF 4.55

On order, shipped within 10-15 days

Design aids for town planning, bridges and pillars
Spörle-Formen 7501
Design aids for town planning, bridges and pillars

Design aids for town planning, bridges and pillars. The four triangles are designed to provide stability and angular accuracy when building houses or walls that require right-angled construction (7110). The large rectangle serves as the upper cover / running surface for bridges (8000, 8100). The round part with masonry can be used, for example, for bay windows on the bridge (8000). The round ring is used, among other things, for constructing a round pillar. Two small squares and two elongated rectangles are used as shims or for height adjustment.

Regular price: CHF 18.20

On order, shipped within 10-15 days

TILLIG TFi2 speed controller
TILLIG 08131 Scale H0
TILLIG TFi2 speed controller

With automatic shuttle train control For all DC models 12 V = Almost constant operating voltage as pulsed square-wave voltage Output current max. 1 A Automatic cut-out in the event of short circuit and overload Power supply by energy-efficient switched-mode power supply (included in the delivery) Console housing that can be joined side by side, dimensions approx. 138 x 80 x 40 mm Properties and functions as in digital operation Excellent running characteristics over the entire speed range Extremely slow running possible Linear speed increase over the entire control range or alternatively 4 different non-linear control curves to choose from Braking to a standstill and starting off again with braking/starting delay at the touch of a button Pulse width control in a new dimension Almost constant LED lighting of the models, even at slow speed Direction-dependent LED lighting of the locomotives despite pulsed voltage Convenient operation Speed control by rotary knob with long travel (270°) Power display as a ring-shaped LED band corresponding to the controller position Direction of travel changed by toggle switch Direction of travel indicated by different colours in the power display With automatic shuttle train control Automatic shuttle train operation without additional relay circuit (with track contacts with diode wiring - circuit board item no. 08401/switching tracks 83158/83758) Any number of intermediate stops in shuttle train mode Automatic activation of the preset braking or acceleration time and of the stopping time Automatic function can be switched off

Selling price: CHF 168.00 RRP CHF 186.30

On order, lead time to be confirmed

Lighting kit
TILLIG 08811 Scale H0m
Lighting kit

Lighting kit for 4-axle narrow-gauge coaches (6 windows, length over buffers 144 mm)

Selling price: CHF 30.90 RRP CHF 33.90

On order, lead time to be confirmed

Lighting kit
TILLIG 08813 Scale H0m
Lighting kit

Lighting kit for 4-axle narrow-gauge coaches (7-/8-window, length over buffers 167 mm)

Selling price: CHF 30.90 RRP CHF 33.90

On order, lead time to be confirmed

10% off the recommended price
Interior lighting
TILLIG 08855 Scale TT
Interior lighting

Interior lighting of the restaurant car

Selling price: CHF 33.90 RRP CHF 37.80

On order, lead time to be confirmed

LED interior lighting
TILLIG 08857 Scale TT
LED interior lighting

Kit interior lighting analogue / digital Kit for 3-axle Prussian coaches

Selling price: CHF 30.90 RRP CHF 34.20

On order, lead time to be confirmed

LED interior lighting
TILLIG 08863 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for driving trailers / passenger coaches

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08864 Scale TT
LED interior lighting

LED interior lighting, analogue/digital, kit for skirted restaurant car

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08865 Scale TT
LED interior lighting

LED interior lighting, analogue/digital, kit for restaurant car type B

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08866 Scale TT
LED interior lighting

LED interior lighting, analogue/digital, kit for 4-axle Reko coaches

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08867 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for skirted coaches (1st class; 1st/2nd/1st class)

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08868 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for skirted coaches (1st/2nd/3rd class; 1st/2nd class; 2nd class; 2nd/3rd class)

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

10% off the recommended price
Traction tyres 14 mm
TILLIG 08883 Scale TT
Traction tyres 14 mm

Traction tyres, 14 mm, bag of 8 pieces - For BR 23/35 (BTTB) - Includes spare part no. 227590

Selling price: CHF 7.00 RRP CHF 7.80

On order, lead time to be confirmed

11% off the recommended price
Disc wheel set
TILLIG 08894 Scale H0m
Disc wheel set

Disc wheelsets for passenger/luggage coaches H0m (8 pieces)

Selling price: CHF 24.90 RRP CHF 28.20

On order, lead time to be confirmed

11% off the recommended price
Disc wheel set
TILLIG 08895 Scale H0e
Disc wheel set

Disc wheelsets for passenger/luggage vans H0e (8 pieces)

Selling price: CHF 24.90 RRP CHF 28.20

On order, lead time to be confirmed

LED interior lighting
TILLIG 08903 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for skirted coaches (3rd class; sleeping car)

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08904 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for passenger coaches B4i-30

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed

LED interior lighting
TILLIG 08905 Scale TT
LED interior lighting

LED interior lighting, analogue / digital kit for BC4i-31 coaches

Selling price: CHF 34.90 RRP CHF 38.40

On order, lead time to be confirmed