Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessories

Filter products
10% off the recommended price
H0 Locomotive decoder with 8-pole interface plug
Viessmann 5245 Scale H0
H0 Locomotive decoder with 8-pole interface plug

Miniature multi-protocol locomotive decoder suitable for RailCom, DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 1 A continuously, 1.8 A peak. 4 function outputs, with additional features: Function mapping, direction-dependent headlights, dimming, flashing. The max. current of the function outputs is 500 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: L ca. 2,4 x W 1,42 x H 0,2 cm.

Selling price: CHF 29.90 RRP CHF 33.50

On order, lead time to be confirmed

Mini-LED red-yellow for fire simulation, 3 pieces with micro-blinker electronics
Viessmann 5273
Mini-LED red-yellow for fire simulation, 3 pieces with micro-blinker electronics

Compact blinker unit that can be integrated especially well into model buildings due to their small dimensions and provide a realistic fire flicker. Operation with only one LED is possible. Easy wiring due to wires already soldered to the LEDs. Dimensions Electronics: L 2,5 x W 0,4 x H 0,3 cm, LED: L 0,16 x W 0,08 cm.

Selling price: CHF 24.90 RRP CHF 27.40

On order, lead time to be confirmed

10% off the recommended price
Multi protocol switching and turnout decoder
Viessmann 5280
Multi protocol switching and turnout decoder

The decoder is a multi protocol decoder for DCC and Märklin Motorola. Suitable as a point decoder for 4 turnouts with double coils and controls 2 additional servos. Equipped with 4 output pairs, which can also be configurated with additional special functions. So lighting effects, blinking for road works or advertising are possible. The decoder recognizes settings of the turnouts with end position and informs postion by RailCom. Features: 4 pairs of turnout outputs (double coils). Switches positive voltage, outputs can also be configured as single outputs, power supply can be provided from the digital signal or from an external supply to reduce load. Many functions for the outputs: Impulse, constant or flashing outputs, adjustable output power, max. current 5 A each output, max. 5 A total. Max. current adjustable. LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos, total 300 mA constant, 450 mA peak. Screw terminals.

Selling price: CHF 60.90 RRP CHF 68.20

On order, lead time to be confirmed

Multi protocol switching decoder
Viessmann 5285
Multi protocol switching decoder

Multi protocol decoder for DCC and Märklin-Motorola. Equipped with 4 powerful relays, and can control 2 servos.Features: 4 separate and galvanically isolated outputs, bi-stable outputs, switching position is preserved even without supply voltage. Supply provided by the track signal, continuous current up to 5 A each output, LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos: 300 mA total continuously, 450 mA peak. Screw terminals.

Selling price: CHF 82.90 RRP CHF 91.90

On order, lead time to be confirmed

10% off the recommended price
N Locomotive decoder with cable - replaces 5240
Viessmann 5296 Scale N
N Locomotive decoder with cable - replaces 5240

Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: ca. L 1,15 x W 0,95 x H 0,21 cm.

Selling price: CHF 31.90 RRP CHF 35.60

On order, lead time to be confirmed

10% off the recommended price
N Locomotive decoder with pin rail, 6 poles - replaces 5241
Viessmann 5297 Scale N
N Locomotive decoder with pin rail, 6 poles - replaces 5241

Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with 6-pole plug according to NEM 651 S. Dimensions: ca. L 1,56 x W 0,95 x H 0,21 cm (incl. plug).

Selling price: CHF 31.90 RRP CHF 35.60

On order, lead time to be confirmed

10% off the recommended price
N Locomotive decoder with Next18
Viessmann 5298 Scale N
N Locomotive decoder with Next18

Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with Next18 plug. Dimensions: ca. L 1,55 x W 0,95 x H 0,21 cm (incl. plug).

Selling price: CHF 31.90 RRP CHF 35.60

On order, lead time to be confirmed

10% off the recommended price
Coupler
Viessmann 5302
Coupler

The coupler connects your digital command station with the Viessmann Commander. It detects the track signals from the station and sends information to the commander. Suitable for Motorola and DCC stations. So all track-, switch- and operation commands are transmitted to the station. LSB-cable is included.

Selling price: CHF 108.00 RRP CHF 120.50

On order, lead time to be confirmed

11% off the recommended price
LSB-cable 28 cm
Viessmann 5390
LSB-cable 28 cm

Cable with plugs for LowSpeedBus. Also suitable for LocoNet.

Selling price: CHF 3.20 RRP CHF 3.60

On order, lead time to be confirmed

LSB-cable 60 cm
Viessmann 5391
LSB-cable 60 cm

Cable with plugs for LowSpeedBus. Also suitable for LocoNet.

Selling price: CHF 4.70 RRP CHF 5.20

On order, lead time to be confirmed

10% off the recommended price
LSB-cable 215 cm
Viessmann 5392
LSB-cable 215 cm

Cable with plugs for LowSpeedBus. Also suitable for LocoNet.

Selling price: CHF 5.20 RRP CHF 5.80

On order, lead time to be confirmed

10% off the recommended price
LSB-cable 600 cm
Viessmann 5393
LSB-cable 600 cm

Cable with plugs for LowSpeedBus. Also suitable for LocoNet.

Selling price: CHF 6.90 RRP CHF 7.70

On order, lead time to be confirmed

Push-button panel 4-aspect
Viessmann 5545
Push-button panel 4-aspect

With impulse contact for two 4-aspect signals colour light, to activate the signals stop, proceed, proceed at reduced speed and stop for shunting movements by control module item 5210 as well as the control module for colour light departure signals item 5223. In analogue mode controlling with control module items 5224 and 5229, by 4-aspect signals connection. Several panels may be connected. Contact load: Up to 2 A.

Selling price: CHF 26.90 RRP CHF 29.50

On order, lead time to be confirmed

Push-button panel 3-aspect
Viessmann 5546
Push-button panel 3-aspect

With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, items 4021, 4022, the signal control module item 5210 and control module for colour light entry signals item 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item 5210 as well as the control module for colour light signals item 5222. Operation in analogue mode with control module items 5224 and 5229 when 3-aspect signals are connected. For 3-rail turnouts use diode item 6834. Several panels may be connected. Contact rating: Up to 2 A.

Selling price: CHF 26.90 RRP CHF 29.50

On order, lead time to be confirmed

Push-button panel, feedback, 3-aspect
Viessmann 5548
Push-button panel, feedback, 3-aspect

Feedback compatible push-button panel with impulse-contact for two semaphore signals with 3 aspects. Authentic feedback of the signals by 6 red, green and yellow LEDs. Several panels can be stringed together. Only useable for signals with automatic deactivation via mechanical contacts. Contact load: 2 A

Selling price: CHF 36.90 RRP CHF 40.80

On order, lead time to be confirmed

10% off the recommended price
Sound module Level Crossing
Viessmann 5556
Sound module Level Crossing

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: Level crossings items 5100 (H0), 5104 (H0), 5108 (H0), 5700 (TT), 5900 (N).

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

10% off the recommended price
Sound module Helicopter
Viessmann 5557
Sound module Helicopter

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: Police or rescue helicopters.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

10% off the recommended price
Sound module Church Bell
Viessmann 5560
Sound module Church Bell

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: Silent Night Memorial Chapel, Vollmer items 42412 (H0), 47612 (N), 49412 (Z) and 41290 (G). Sound module is equipped with 6 selectable church sounds. Including classical Silent Night in German, English, French, Italian or Spanish.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

10% off the recommended price
Sound module Bad Manners (burping and farting)
Viessmann 5561
Sound module Bad Manners (burping and farting)

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: Restrooms items 1500 and 1545, nature's call item 1547 or seating accomodation beer-garden with men item 1525. These sounds are played alternatively.

Selling price: CHF 47.90 RRP CHF 53.60

On order, lead time to be confirmed

10% off the recommended price
Sound module LANZ Bulldog
Viessmann 5562
Sound module LANZ Bulldog

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: LANZ bulldogs Viessmann items 1155, 1167 and kibri item 12255.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

New
Sound module Lovers
Viessmann 5566
Sound module Lovers

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Fits to e. g. sexy lovers, items 1501 and 1504.

Selling price: CHF 44.90 RRP CHF 49.60

On order, lead time to be confirmed

10% off the recommended price
Sound module Chicken run
Viessmann 5569
Sound module Chicken run

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Fits to e. g. chicken run, item 1528.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

10% off the recommended price
Sound module Chainsaw
Viessmann 5572
Sound module Chainsaw

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. The sound module has a control input for motion-synchronized sounds. Suitable for: Fire brigade item 1541, lumberjack item 1548.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed

10% off the recommended price
Sound module Hunt
Viessmann 5574
Sound module Hunt

Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. The sound module has a control input for motion-synchronized sounds. Suitable for: Huntsman item 1529.

Selling price: CHF 49.90 RRP CHF 55.90

On order, lead time to be confirmed