Accessories
AL leg, 3x3x110-120 cm, with adjusting screw, for modules. 1 piece.
On order
AL leg, 3x3x82-92 cm, with adjusting screw, for modules. 1 piece.
On order
Includes 2 transport plates 40 x 50 x 0.5 cm as well as a set of mounting screws with washers and nuts. After operation, two modules with landscape can simply be folded against each other, connected using the transport plates, fitted with protective covers and safely stored or transported. This protects the layout from dust and mechanical damage.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, very sturdy yet flexible material; the individual elements therefore need no further reinforcement and can be installed without tools. They ensure smooth, vibration-free train operation without disturbing noise, and can be cut with a sharp knife or a hot wire and glued with hot melt adhesive or Hacker CA glue. The FLEXI versions can also be easily adapted to the individual course of the track plan; the ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. The FLEXI version can be easily adapted to the course of the track plan and cut with a sharp knife or a hot wire, then glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0%, 3.7% and 4.4%.
On order
The ramps are made of a high-quality, sturdy yet flexible material that can be installed without additional reinforcement and ensures smooth, vibration-free train operation. They can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue. The ramps are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The ramps are made of a high-quality material that is stable yet flexible and require no additional reinforcement. They ensure quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. As a FLEXI version they easily adapt to the course of your track plan and are available with gradients of 2.2%, 3.0% and 4.4%.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality material that is stable yet flexible and requires no additional reinforcement. It ensures quiet, vibration-free train operation, can be cut with a knife or hot wire, and glued with hot glue or Hacker CA adhesive. The segments are available in various widths and heights, allowing the entire track route to be built quickly without expensive tools.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The FLEXI version can be easily and individually adapted to the course of your track plan, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The FLEXI version can be easily and individually adapted to the course of your track plan, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very sturdy yet flexible material. The individual elements therefore do not need to be reinforced and can be installed without tools, ensuring quiet, vibration-free train operation. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue.
On order
The embankment is made of a high-quality, very stable yet flexible material that ensures smooth, vibration-free train operation without disturbing noise. The elements can be cut with a sharp knife or a hot wire and glued with hot-melt adhesive or Hacker CA glue, allowing the track plan to be adapted quickly and individually.
On order
The Hacker I-Track system also includes supports for easy mounting of our I-Track segments or other constructions. The supports are available in two versions: wooden supports and universal supports. The universal supports are made of a special foam and measure 60x40x600mm or 25x40x600mm. The universal supports are simply cut to the desired length with a knife. They are then mounted with hot-melt glue or our Hacker CA adhesive. The wooden supports consist of several parts and can therefore be assembled individually. The individual parts are simply pushed into one another. In this way, for example, multi-level supports can be built entirely to your needs. The individual parts only need to be glued after assembly, so you can be sure that the supports will also fit your layout. To glue the wooden parts, use standard wood glue or our Hacker superglue. The lengths of the supports vary depending on the scale and are based on the respective height increments of our Rondela track helix system - Äh = 110mm (H0), Äh = 71mm (TT), Äh = 52.5mm (N). The supports are offered as kits, including screws for mounting the base, in various sets. E.g. sets with supports of the same height for building level trackbeds, with 12 pairs of one support height each (S1, S2, ..., S12). As a set for building gradients / downgrades, with one pair of each support height (S1 - S12, which follow the lower transition segment). For the upper transition segments of Rondela there are the SE supports. These are used to mount the upper transition segments, which achieve a gentle transition from the gradient to level track (see chapter – Transition segments). SE supports are available for the Rondela versions 360° (1 base circle) and 540° (1.5 base circles). With the SR extension supports, you can raise all supports by one or more levels. To mount our railing made of 2mm aluminium wire, simply use the grooves already provided for this purpose on the supports, or the separate railing brackets FA. When assembling the individual I-Track segments, they are fixed with the holder H until you have glued them. On curves we recommend positioning a support every 30°. For straight gradients / downgrades, position the individual supports so that you do not exceed the maximum gradient recommended for your gauge. For level, straight sections of line, choose the spacing between the supports so that the I-Track segments do not sag under load.
On order