Accessories
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 Märklin C, TRIX H0 track radius 643.6 mm, 1-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1367 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 Rondela add-on circle Märklin C, TRIX H0 R5, track radius R 643.6 mm, 6 segments = 1 circle, build height: 110 mm, segment width: 80 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1369 mm
On order
RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 Märklin C, TRIX H0 track radius R 643.6 mm, 1-track, base circle, 6 segments = 1.5 circles, build height: 200 mm, segment width: 80 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1369 mm
On order
I-Track curved segments are track-bed construction elements made of high-quality laser-cut plywood, with which you can bridge any terrain shape and easily change levels. Thanks to the supplied modular supports, the gradient can be freely adjusted, ideal for entries and exits to hidden stations. This H0 segment for Märklin C track has a radius of 1114,6mm, an angle of 12,1°, a width of 80mm and is supplied as a kit of 6 pieces.
On order
Track bed elements, 5 mm thick (H0, TT) or 3 mm (N), are available straight or curved with various radii and fit precisely onto the I-Track segments, the Rondela helix, or directly onto any layout baseboard. This stable yet flexible material ensures quiet, vibration free train operation without disturbing noise, and can be trimmed to size with a sharp knife if needed.
On order
The YD7001-E is a pure DCC digital command station with a 3 A output current and RailCom support. It is based on a brand-new, revised DR5000 main board with a pre-installed YD9401 network module, and it additionally measures input and track voltage. It controls up to 117 locomotive addresses and 2048 accessory addresses and supports DCCext. Connections: LocoNet T and B, XpressNet, Roco B-Bus, RS-Bus, S88 ES-Link, a fully functional programming track, USB, LAN and WLAN access point. In the network, the Z21, WiThrottle, LocoNet and XpressNet protocols are available. An IR receiver allows remote controls such as Uhlenbrock or Piko DigiFern. Formats such as mfx and Motorola are not supported. Track output 3 A Power supply 15 to 19 V DC, max. 3.5 A Programming track max. 750 mA Housing 157 x 88 x 22 mm
The YD7652HS is a position sensor board for use with all variants of Fleischmann turntables. The YD7652HS has been specially developed for turntables that no longer have ‘contact tabs’ on the bridge, which would otherwise make Basic-Plus operation (turning without the ‘click-clack’ sound) impossible. With this board mounted beneath the pit and a magnet beneath the turntable bridge, the bridge’s position is detected with pinpoint accuracy. It is also a cost-effective alternative to the YD7652ES sensor when there are more than 12 access tracks. It presents: - 48 Hall-effect sensors, highly sensitive - Extremely strong neodymium magnet included - ES-Link connected directly to the YD7652 via an RJ45 cable - All fixing materials included - Available for both large and small Fleischmann turntables - Very simple installation and adjustment
The YD7652ST-STEP is an extension of the turntable control YD7652 for connecting turntables with stepper motor drive. It contains a quiet stepper motor driver, whose settings are controlled by the processor, with micro-steps from 8 to 256 as well as dynamic acceleration and deceleration. A connection for a home or index sensor (for example Hall or infrared) is built in. The supply of the turntable track is passed through by the YD7652 with automatic polarisation. Supply 12 to 19 V Motor current max. 1.2 A Microsteps 8 to 256 Connection for home/index sensor