Accessories
LEDs with enamelled copper wires. Ready for connection to 12-16 V, AC/DC voltage. Pressure-sensitive. To illuminate buildings, rooms, means of advertising, outdoor installations, etc. In AC voltage mode you need rectifier (art. 180633) for flicker-free operation.
On order, shipped within 4-5 days
Bar spotlights with 5 LEDs each. Ready for connection to 12-16 V, AC/DC voltage. The connections using enamelled copper wires on both sides allow to divide or shorten the bars one time. In AC voltage mode you need rectifier (art. 180633) for flicker-free operation.
On order, shipped within 4-5 days
2 light chaines with 5 lampions each. 16 V alternating current voltage (AC).
On order, shipped within 4-5 days
The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:
On order, shipped within 4-5 days
The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:
On order, shipped within 4-5 days
The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:
On order, shipped within 4-5 days
The program provided simulates a lived-in house by changing the lighting in the rooms, hallway or staircase. Two speeds of light change can be selected. Can be switched with the »relay module«, Art. 161659 or any commercially available switch. The connection is made to 12 V DC or 16 V AC.
On order, shipped within 4-5 days
Efficiency-optimised switching power supply for model building systems - compact, reliable and future-proof. With an optimised output module for a wide range of applications, it supplies 16 V AC (3.13 A), 12 V DC (3 A) and 5 V DC (3 A). Thanks to state-of-the-art technology, it fulfils the current legal requirements for energy saving in accordance with the Ecodesign Directive - for maximum efficiency and sustainability.
On order, lead time to be confirmed
This quick charging device with USB A connection can be connected and operated on any PC/notebook. It has been specially developed for charging the FALLER lithium-polymer batteries, Art. 180713, which are required for operating the container gantry crane models, Art. 120290 and Art. 120291 with the corresponding drive set, Art. 180290. Only use the Lithium battery charger (3,7 V), Art. 180714, to charge the batteries, Art. 180713.
On order, shipped within 4-5 days
Experience a fascinating industrial atmosphere in your model world! Contents: Pre-assembled tier lighting with 53 LEDs Flaring chute lighting with COB LED strip 2 servos for the realistic movement sequences of the tap hole drill and the tamping machine Power supply unit for reliable power supply Control unit with fixed sequence control - can also be controlled digitally for perfect staging
On order, lead time to be confirmed
This equipment controls and also programs four connectable servos. The same as our new controls, these can also be controlled completely analogue or digital via a corresponding control. Connects via 16 V, AC voltage.
On order, shipped within 4-5 days
Complex control made easy! In addition to the great power they develop for such a compact size, servos have the great advantage of travel range and turnout speed being adjustable in both directions.
On order, shipped within 4-5 days
Powerful analog servo with plastic gear. - Connector type: JR - Positioning angle: 90° - Response velocity: 0.12 to 0.15 s for 60° - Voltage: 4.8 to 6 V - Torque: 3.5 to 4.4 kg.cm - Weight: 43 g - Dimensions: 40.7 x 20.5 x 39.5 mm - Cable length: 300 mm - Connection to Servo Control Art. 180725
On order, shipped within 4-5 days
Updated for easy handling! Lighting kit featuring LED technology for the »Ferris wheel«, Art. 140312. With this set, all 20 gondolas of your Ferris wheel will shine in five different, constantly glowing colours (orange, yellow, green, red, blue). Lighting for the entrance arch with three LEDs is also included in the set.
On order, shipped within 4-5 days
The smoke generator uses a paraffin-free evaporation system and contains no harmful substances. It therefore ensures reliable and clean smoke production whilst offering a high level of operational safety. A built-in fan allows you to adjust the smoke output – from a fine mist to clearly visible plumes of smoke. Thanks to this new technology, the miniature world looks so much more authentic! Technical specifications: Operating voltage: 12–16 V AC/DC, inrush current: 1.3 A, current consumption after warm-up phase: 0.3 A
Pre-order, release expected in November 2026
For worldwide use. USB cable with open cable end for power supply of operating models via an existing type-A USB port. Particularly suitable in the carnival area, for example for powering model such as the »Daemonium Ghost Train«, Art. 140418, »Sala Motor-Drome Motorcycle sheer wall show«, Art. 140336, or for lighting a ferris wheel. Technical data: - Connections: > 1 x USB 2.0 type-A plug > 2 x open cable ends (VCC/red/5 V and GND/black/earth) - Wire cross section: 28 AWG - Cable diameter: approx. 4.5 mm - Cable length without connections: approx. 2,000 mm - Colour: black Please be sure to check the power of the USB port to avoid overloading.
On order, lead time to be confirmed
The ideal landscape scene for the installation! This model background consists of three components. Simple processing and printed on appropriately stable material.
On order, shipped within 4-5 days
Suitable for the styling of trees and bushes and as rank growth in the terrain.
On order, lead time to be confirmed
Suitable for the styling of trees and bushes and as rank growth in the terrain.
On order, shipped within 4-5 days
Planning, Design, Technique – The indispensable reference and learning book for fascinating miniature road traffic. The comprehensive manual »Pro tips Car System« contains all fundamentals as well as detailed expert know-how relating to the topics Vehicles, Road building and Traffic control. Learn step by step the essential working techniques leading to the successful operation of Car System, and immediately implement your own ideas and projects. - All information on Car System in one volume - Comprehensive descriptions and illustrations - Connection diagrams for plenty of traffic scenarios - Professional road building for Car System and Car System Digital - For newcomers and advanced modellers
On order, shipped within 4-5 days
The FALLER 2025/2026 catalogue with the manufacturer's current range.
On order, shipped within 4-5 days
Model of a widely-used mounted light with flat metal lattice mast. Particularly suitable for illuminating rail-side scenes such as railway stations, depots and track fields. This two-light lamp is equipped with long-life LED technology. The product is ready for connection to 12 V direct current (DC). Use the »Transformer«, Art. 180699, to operate the lamp. Height: 80 mm. Light colour: warm white. Contents: 3 units.
On order, shipped within 4-5 days
A modern design trapeze light. Particularly suitable for designing city, street and industrial scenes, but also railway scenes. The mast is made of metal. The intricate two-light lamp is equipped with long-life LED technology. The product is ready for connection to 12 V direct current (DC). Use the »Transformer«, Art. 180699, to operate the lamp. Height: 60 mm. Light colour: warm white. Contents: 3 units.
On order, shipped within 4-5 days
Transition rail joiner to Arnold track system. Content: 12 pieces/pack. Arnold is a registered trademark of HORNBY ITALIA S.r.l.
On order, shipped within 10-15 days