Accessories
Locomotive decoder "SILVER+ PluX12" Continuous current rating 750 mA, with interface according to NEM 658, 4 function outputs, ABC, RailCom, dimensions: 11.0 x 20.0 x 4.0 mm
On order, lead time to be confirmed
Locomotive decoder "SILVER+ Next18" Continuous current rating 600 mA, with interface according to NEM 662, 8 function outputs, ABC, RailCom, dimensions: 15 x 9.5 x 2.9 mm
On order, lead time to be confirmed
The locomotive decoder "SILVER+ 21MTC" has a continuous current rating of 1000 mA, a 21-pin interface, 4 function outputs, ABC, and RailCom. Dimensions: 20.6 x 15.7 x 4.0 mm.
On order, lead time to be confirmed
Locomotive decoder "SILVER+ PluX22" Continuous current rating 750 mA, with NEM 658 interface, 9 function outputs, ABC, RailCom, S.U.S.I. interface, dimensions: 22 x 15 x 6 mm
On order, lead time to be confirmed
Locomotive decoder "Gold+", continuous current rating 1000 mA, 4 function outputs, with NEM652 interface (function outputs 3 and 4 are led out as cables), ABC, USP, RailCom, S.U.S.I. interface, Dimensions: 22.8 x 16.7 x 4.9 mm
On order, lead time to be confirmed
Energy buffer for connection to GOLD+ series decoders. This buffer continues to supply power to the decoder and locomotive during a track power interruption (e.g. a non-powered common crossing). Dimensions: 22 x 13.3 x 9.4 mm
On order, lead time to be confirmed
The LA 010 adapter is required when connecting motorised point motors or EPL drives to the LS100/LS101 signal receiver. Dimensions: 14 x 30 x 13 mm
On order, lead time to be confirmed
The LS101 function decoder, the successor to the well-known LS100, can connect four points, signals, etc. DC voltage is present at the outputs. This must be taken into account when using LEDs. The connection to the central unit required for the feedback of the point position is established via terminals R and S of the LS101; the point or signal position is then displayed, for example, on the hand controller or passed on as information to a control program.
On order, lead time to be confirmed
Up to six points, signals or other accessories can be controlled via the LS150 function decoder. It is supplied with separate AC voltage; the TR100 transformer is recommended for this purpose. This provides AC voltage at the switching outputs. This voltage form is of great advantage when using so-called "dual-coil point motors". Dimensions: 120 x 60 x 20 mm
On order, lead time to be confirmed
Up to 8 inputs of the LR101 can be connected to switching contacts or LB101 occupancy detectors, and a further input to the LB050 voltage detector. To bridge uncertain switching states (e.g. brief interruptions in the current flow), a programmable delay time for the free indication can be assigned to each occupancy detector input on the LR101.
On order, lead time to be confirmed
To detect track occupancy in conjunction with the LR101, the LB101 operates as a current sensor and is connected between the LR101 and the track section to be monitored. One LB101 can monitor two track sections independently. Dimensions: 60 x 12 x 42 mm
On order, lead time to be confirmed
The LK200 operates on the residual current principle, with polarity reversal occurring at a residual current of just 100 mA, and polarity indication provided by an LED. Switching is electronic without relays, ensuring high switching speed and no mechanical wear. Wiring is straightforward, allowing the LK200 to be retrofitted into the layout with minimal effort. No adjustment or setting work is required. The maximum current rating is 5 amperes.
On order, lead time to be confirmed
This 4-digit display can show the locomotive's address in the monitored section of track. It can be installed anywhere on the model railway layout, for example in a panel control desk. Dimensions: 47.5 x 65 x 12 mm
On order, lead time to be confirmed
The LZV200 handles data processing and signal amplification. Naturally, the LZV200 meets the requirements and conditions for operating the model railway. If required, the track voltage can be adjusted between 11 and 22 volts, with a maximum output current of 5 amperes available. In the event of higher load, the safety circuit switches off. The factory setting is an output voltage of 16V and a maximum current of 5A. Dimensions: 120 x 55 x 120 mm
On order, lead time to be confirmed
LH01 hand controller with rotary knob
On order, lead time to be confirmed
Controller for four locomotives, 10 locomotive functions and 10 points/signals
On order, lead time to be confirmed
The hand controller features a rotary knob and a large, backlit LCD display, with adjustable contrast and brightness, various operating modes, route programming and storage. Dimensions: 144 x 62 x 42 mm. The leaflet for the LH101 firmware update is located under "N:2_Digital_plus21101_LH101UpdateFirmwareupdate_LH101.pdf".
On order, lead time to be confirmed
LH101-R hand controller with rotary knob Batteries and connecting cable are included Dimensions: 144 x 62 x 46 mm
On order, lead time to be confirmed
Like the LH101-R radio hand controller, but with the LTM101 receiver. Batteries and connecting cable are included. Dimensions of the LH101-R radio hand controller: 144 x 62 x 46 mm, dimensions of the LTM101 receiver: 53 x 60 x 20 mm.
On order, lead time to be confirmed
The LV103 is designed to meet the safety requirements and conditions for operating a model railway. If required, the track voltage and output current can be individually adjusted to suit the specific situation, with a maximum output current of 5 amperes. The factory settings are an output voltage of 16V and a maximum current of 5A.
On order, lead time to be confirmed
In the simplest case, the track voltage to the braking section before the signal is routed via the BM1. When the signal shows "Hp 0", the BM1 creates an asymmetry in the otherwise symmetrical digital voltage, which is detected by decoders from the GOLD and SILVER series. The result is a gentle deceleration of the train until it comes to a standstill. If the train approaches from the opposite direction, it simply continues running, as the asymmetry is detected depending on the direction of travel.
On order, lead time to be confirmed
The BM2 not only allows the train to be stopped at "Hp 0" before the signal, but also offers the installation of a slow-running section for "Hp 2". The track section before the signal is divided into a running section and a braking section. The length of the running section must be designed so that the longest train operating there fits completely within it. The length of the braking section is determined (as with the BM1) by the set braking deceleration or the set braking distance.
On order, lead time to be confirmed
The Block Section Module BM3 is a building block that uses ABC technology to slow down and stop trains. It enables prototypical block section operation. The number of blocks is unlimited, as one BM3 is used for each block. The BM3 has a connection for colour light signals to indicate the status: red signal = next block occupied, BM3 set to stop; green signal = next block free, BM3 set to proceed.
On order, lead time to be confirmed
A block section equipped with BM3 that runs through a reversing loop requires, in addition to the LK200, a special BM3 module, the BM3K, and two of them. The reason is the reporting line, which consists of only one wire, which is very practical in the "normal case". In this special case, however, the potential is reversed by the reversing loop module, so the reporting via the reporting line would no longer work.
On order, lead time to be confirmed