Accessories
This motor is installed in the models of the field railway locomotives (example: 24140) built from 2015 onwards. This motor cannot be used for older locomotives.
On order, shipped within 10-15 days
With the rerailer, rerailing LGB models is child's play: place the rerailer on a piece of straight LGB track and push the model onto the track.
On order, shipped within 10-15 days
With the automatic shuttle unit, you can have a train shuttle back and forth between two stations. An electronic circuit stops the train at the station and then lets it run back again. Easy to install, with an adjustable dwell time and prototypical gentle starting and braking. For connection to 10-24 V DC. The 10345 is the technically optimised and improved successor to the 10340.
On order, shipped within 10-15 days
With this small contact, you can automatically control your LGB points, signals and other accessories. It is triggered by a locomotive equipped with the LGB 17010 magnet and can easily be clipped into most LGB tracks.
On order, shipped within 10-15 days
LGB Catalogue 2025 DE
On order, shipped within 10-15 days
LGB Catalogue 2025 EN
On order, shipped within 10-15 days
LGB Catalogue 2025 FR
On order, shipped within 10-15 days
LGB Catalog 2026 DE
On order, shipped within 10-15 days
LGB Catalog 2026 EN
On order, shipped within 10-15 days
LGB Catalog 2026 FR
On order, shipped within 10-15 days
An inexpensive way to clean your rails easily and gently. The hand-held rail cleaner removes dirt from the rails without grinding them down. The 6 mm thick cleaning block has a long service life. Use with care on nickel and nickel silver tracks.
On order, shipped within 10-15 days
Use your trains to clean the rails! The two cleaning blocks are pressed on by spring pressure and thus clean the rails while the train is running. The rail cleaning attachment can be mounted on many two-axle LGB wagons. Cleaning blocks (LGB 67005) are available as spare parts. Not suitable for nickel tracks.
On order, shipped within 10-15 days
This cable is designed and colour-coded especially for LGB points and signals. Cross-section: 0.5 mm2, length: 20 m.
On order, shipped within 10-15 days
Keep your cable ends from "fraying". Using pliers, you can crimp these ferrules onto all LGB cables with a 0.5 mm2 cross-section.
On order, shipped within 10-15 days
This cable is designed and colour-coded especially for LGB accessories such as control panels and lighting. Cross-section: 0.5 mm2, length: 20 m.
On order, shipped within 10-15 days
Make your own track connection cable with the cable length you want. Each terminal is equipped with a screw for fastening to the rail and a socket for connecting the cable. Required for connecting the CS2/CS3 digital central unit, Märklin 60215/60216.
On order, shipped within 10-15 days
With this practical wiring aid you can connect up to 12 wires at a time. This allows you to connect street lamps or cables for several feeder points. Terminals 1-12 and 13-24 are each electrically connected to one another. Screw terminals make the connections easier. 84 x 42 x 19 mm.
On order, shipped within 10-15 days
This electronic controller for analogue operation offers state-of-the-art technology with high traction current and modern features for your analogue LGB layout: max. 5 A traction current, for use with the 51095 switched-mode power supply. Very sensitive control and smoothed DC voltage. Adjustable control range: +/- 135° with a zero position in the centre / booster button with programmable acceleration, stop/halt button. LED indicators for stop, overload, ready for operation, and direction of travel. Terminals for cables with a cross-section of up to 1.5 mm2, protection against short circuits. Output: 0-24 V DC voltage. Traction current: max. 5 A. Dimensions 160 x 120 x 95 mm.
On order, shipped within 10-15 days
Prototype Splash-proof 110 VA switched mode power pack, IP 65, with a European plug. 120 volts - 240 volts. Suitable for the 51079 locomotive controller and the CS 2/3 60215, 60216, 60226.
On order, shipped within 10-15 days
Model Switched-mode power supply, protected against water jets (IP 65), for supplying power to the 51099 controller. Connecting cable to the mains with a Euro plug. Highlights 230V, 36 VA. Euro plug, can be used universally Protected against water jets IP 65
On order, shipped within 10-15 days
Controller for use with the 51092 switched-mode power supply.
On order, shipped within 10-15 days
This two-conductor black/white cable is designed for the AC connections on your LGB layout and is colour-coded accordingly. Cross-section 1.5 mm2, length 15 m.
On order, shipped within 10-15 days
With this versatile control panel you can switch up to four electrical circuits on and off, e.g. electrically separated track blocks or street lamps. Each toggle switch operates one circuit. Depending on your needs, you can connect the control panel to DC or AC power by means of the plugs on the sides. An LED indicates when the control panel is being supplied with power. Colour-coded connections on the back make hooking it up easier. With stickers for marking the switch assignments. 126 x 116 x 66 mm. Replaces item 51800.
On order, shipped within 10-15 days
The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.
On order, shipped within 10-15 days