Accessories
When the onboard system was introduced at LGB in 2002, the connector system colloquially known as MiniCT came into use. From that point on, all components were made (with a few exceptions) with this connector system and installed in tens of thousands of models. The MiniCT system covers not only the onboard decoders but also the models referred to as Onboard-DCC with a decoder interface (e.g. for LGB 55027). Via the MiniCT connector system, components such as lighting, clock generators, reed contacts, loudspeakers, sockets, etc. are connected to the heart of the locomotive (decoder or interface board). To this day this connector system is used at LGB and of course also in the well-known Massoth components. As part of the development of the range, the item is now offered in a practical bag of 4 at a lower price. The cables are each 300mm (30cm) long.
On order, lead time to be confirmed
When the onboard system was introduced at LGB in 2002, the connector system colloquially known as MiniCT came into use. From that point on, all components were made (with a few exceptions) with this connector system and installed in tens of thousands of models. The MiniCT system covers not only the onboard decoders but also the models referred to as Onboard-DCC with a decoder interface (e.g. for LGB 55027). Via the MiniCT connector system, components such as lighting, clock generators, reed contacts, loudspeakers, sockets, etc. are connected to the heart of the locomotive (decoder or interface board). To this day this connector system is used at LGB and of course also in the well-known Massoth components. As part of the development of the range, the item is now offered in a practical bag of 4 at a lower price. The cables are each 300mm (30cm) long. Packaging unit: 4/Pack
On order, lead time to be confirmed
Replacement rail contact brushes for most LGB locomotives from 1990 onwards. (4/pack)
On order, lead time to be confirmed
Pantograph carbon strips, 14 mm (8/pack)
On order, lead time to be confirmed
Pantograph carbon strips, 16 mm (8/pack)
On order, lead time to be confirmed
Replacement pickup shoes for LGB 2067 track-cleaning locomotive (2/pack)
On order, lead time to be confirmed
Replacement grinding pads for LGB 50050 track-cleaning machine (4/pack)
On order, lead time to be confirmed
Replacement grinding plate for LGB track cleaning machine 50040 (1/pack)
On order, lead time to be confirmed
With the universally applicable loudspeaker drilling template, there is now finally a precise tool that ends the often necessary but not always professionally looking "freehand drilling" of sound outlet holes when fitting a loudspeaker. The product, made from high-quality stainless steel, is fixed centrally in a hole drilled at the desired location using the supplied screw and wing nut. The symmetrical 4mm holes for the sound outlet, which fit all loudspeakers available from Massoth but also many other brands, can now be made cleanly. The four wings with the smaller 2.5mm holes also allow the holes for the fixing screws to be made in the correct position. To enable work in cramped spaces, the wings are partly provided with a break-off point (tool required, beware of sharp corners) for easy removal.
On order, lead time to be confirmed
There are changes in the classic spare parts range too: in 2021 we are replacing the previous red traction tyres 8315105 (Ø37.5mm) and 8315205 (Ø46.5mm), with 5 pieces each in the pack, with new, transparent traction tyres in original manufacturer quality, as fitted at the factory by garden railway manufacturers. The larger pack contains 8 pieces. The material is subject to colour variations. Traction tyres Ø37.5mm (8/Pack) compatible with LGB 69104, E126174
On order, lead time to be confirmed
There are changes in the classic spare parts range too: in 2021 we are replacing the previous red traction tyres 8315105 (Ø37.5mm) and 8315205 (Ø46.5mm), with 5 pieces each in the pack, with new, transparent traction tyres in original manufacturer quality, as fitted at the factory by garden railway manufacturers. The larger pack contains 8 pieces. The material is subject to colour variations. Traction tyres Ø46.5mm (8/Pack) compatible with LGB 69184, E131368
On order, lead time to be confirmed
The fully synthetic special oil is 100% free of resin and acid and is excellently suited for the model railway sector. The 12 ml bottle with the 40 mm fine nozzle (drop oiler) reaches every corner of the garden railway model.
On order, lead time to be confirmed
The Massoth smoke and cleaning distillate has been specifically developed for use in model railway smoke generators, ensuring reliable and consistent smoke production. It is also ideal for the gentle cleaning of locomotives, coaches, track and other model railway components.
On order, lead time to be confirmed
With the MM1 contact paste (graphite grease) in the practical dosing tube, contact problems at the rail joints in indoor and outdoor layouts are a thing of the past.
On order, lead time to be confirmed
After replacing gear components and motors, the gears and bearings are lubricated with this grease, which is specifically designed for high temperatures and extreme pressure. It is also suitable for wagon axle bearings.
On order, lead time to be confirmed
The newly developed system, equipped with its own decoder, replaces the classic pantograph control of LGB locomotives and allows operation in five modes: Digital/DCC, SUSI, LGB-Bus, Märklin-Bus, and Analog, making it versatile. For example, all common function decoders available on the market can be used, and the function keys for operating the pantographs can be individually programmed.
On order, lead time to be confirmed
This high-quality smoke and cleaning distillate in a safety-closure bottle, with a new formula, is odourless and gentle on plastics and colours. It is ideally suited to all commercially available smoke generators and can also be used for cleaning. A measuring pipette is included. Not classified as dangerous goods. (Content: 250 ml)
On order, lead time to be confirmed
The hose set consists of four different interlocking hose elements, which allow a flexible yet secure connection to be made between the pulsed evaporator and the locomotive chimney. This ensures that no smoke is lost.
On order, lead time to be confirmed
The pulsed high-performance steam generator (new for 2022) can be used independently in steam or diesel operating modes. Thanks to direct track power pickup and the integrated software decoder, the full range of functions is already available in analogue operation at a track voltage of approximately 6 volts. The integrated decoder handles all necessary processing. Using a clock generator and a bus connection for MASSOTH/LGB, the steam generator can be integrated into many existing locomotives, provided the required installation space is available. The tank fill level should be 4 cm³ or a maximum of 6 cm³ (ideally measured using a pipette).
On order, lead time to be confirmed
Heating element, analogue (for 8413101)
On order, lead time to be confirmed
The pulsed high-performance boiler (new for 2022) can be used independently in steam or diesel operating modes. Through direct track power pickup and an integrated software decoder, control via a digital address using the digital system is always possible, and a separate decoder is no longer required. The integrated decoder handles all necessary processing, so a SUSI interface is no longer present. Using a clock generator and a bus connection for MASSOTH/LGB, the boiler can be integrated into many existing locomotives, provided the required installation space is available. The tank fill volume should be 4 cm³ or a maximum of 6 cm³ (measurable with a pipette).
On order, lead time to be confirmed
Heating element, digital (for 8413501)
On order, lead time to be confirmed
It goes without saying that a genuine steam locomotive produces plenty of steam. However, the steam is not only expelled through the chimney. The cylinders are also drained with hot steam. Even the first garden railway locomotives from LGB had a built-in steam generator. These models were identifiable by the letter D in the item number. In outdoor operation, the small wisp of smoke was hardly visible. It took over 30 years until the Harz locomotive 99 7234 was fitted with a Massoth steam generator that produced strong, wheel-synchronous smoke. As an autumn novelty in 2014, Massoth presented for the first time an additional module for wheel-synchronous cylinder steam (8413901). A three-way valve enables the smoke to be directed through the chimney and both cylinders using only one steam generator. Original sounds combined with the appropriate steam significantly enhance the illusion of the hard-working locomotive on its way to the Brocken, in the Swiss mountains, or along the Rio Grande.
On order, lead time to be confirmed
The newly developed round boiler steam generator combines the previously considered impossible synchronized chimney and cylinder steam functions in the smallest of spaces in a single, compact unit. The special round design with an external diameter of only 30 mm now finally allows installation in genuine round boilers, even with proportionally small boiler diameters. This means that even smaller locomotives such as the LGB Stainz or Franzburg can be equipped with this technical marvel. The low current consumption (max. 600 mA, on average only 400 mA) is also unique. Competing products sometimes require several times the power, which can be to the detriment of the installed electronics and wiring. With the activatable diesel mode, the steam generator is also excellently suited for diesel locomotives.
On order, lead time to be confirmed