Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
ES-Link USB configuration stick
YaMoRC YD9100
ES-Link USB configuration stick

The YD9100 is a USB configuration module for all YaMoRC modules with an ES-PGM-Link or ES-OUT-Link connection, for example the YD8008, YD8044 and YD8116 decoders or the YD7403 booster. It provides a virtual COM port on the PC, through which the PC configuration software changes the settings of the connected modules and carries out firmware updates. The stick has a genuine FTDI USB chip and a mini-USB connection. The connection to the module is made using the supplied YD6901 connector; for greater distances, the YD6902ES-EXT adapter and an RJ45 cable are used. The manufacturer recommends a USB isolator. USB with virtual COM port Mini-USB socket Includes YD6901 ES-Link connector

Regular price: CHF 23.00

On order, shipped within 3-8 days

Network/Wi-Fi upgrade module for DR5000
YaMoRC YD9401
Network/Wi-Fi upgrade module for DR5000

The YD9401 is a retrofit module that replaces the RM04 WLAN/LAN module of the Digikeijs DR5000 digital central station. Together with the associated firmware, the DR5000 is converted into a YD7001 central station. The module provides a WLAN access point without an external router, a 100baseT LAN connection, and a built-in web server for configuration in a browser. The XpressNet-LAN, Z21, LocoNet Binary, LocoNet LBServer, and WiThrottle protocols can be used simultaneously via WLAN and LAN. The installation can be carried out by the user; a licence key must be requested by email to activate the module. Opening the DR5000 voids the Digikeijs warranty. Replacement for the DR5000 RM04 module WLAN access point and 100baseT LAN Configuration via web browser Installation requires: Windows PC, USB cable, cross-head screwdriver

Regular price: CHF 64.00

On order, shipped within 3-8 days

Smoke oil, 50 ml
Faller 180688
Smoke oil, 50 ml

Bottle of smoke oil for refilling the smoke generator. Lasts for approximately 4 operating hours.

Regular price: CHF 9.49

No longer available

DCC digital command station based on DR5000, revision E
YaMoRC YD7001-E
DCC digital command station based on DR5000, revision E

The YD7001-E is a pure DCC digital command station with a 3 A output current and RailCom support. It is based on a brand-new, revised DR5000 main board with a pre-installed YD9401 network module, and it additionally measures input and track voltage. It controls up to 117 locomotive addresses and 2048 accessory addresses and supports DCCext. Connections: LocoNet T and B, XpressNet, Roco B-Bus, RS-Bus, S88 ES-Link, a fully functional programming track, USB, LAN and WLAN access point. In the network, the Z21, WiThrottle, LocoNet and XpressNet protocols are available. An IR receiver allows remote controls such as Uhlenbrock or Piko DigiFern. Formats such as mfx and Motorola are not supported. Track output 3 A Power supply 15 to 19 V DC, max. 3.5 A Programming track max. 750 mA Housing 157 x 88 x 22 mm

Regular price: Price to follow
Position sensor for Fleischmann turntables
YaMoRC YD7652HS
Position sensor for Fleischmann turntables

The YD7652HS is a position sensor board for use with all variants of Fleischmann turntables. The YD7652HS has been specially developed for turntables that no longer have ‘contact tabs’ on the bridge, which would otherwise make Basic-Plus operation (turning without the ‘click-clack’ sound) impossible. With this board mounted beneath the pit and a magnet beneath the turntable bridge, the bridge’s position is detected with pinpoint accuracy. It is also a cost-effective alternative to the YD7652ES sensor when there are more than 12 access tracks. It presents: - 48 Hall-effect sensors, highly sensitive - Extremely strong neodymium magnet included - ES-Link connected directly to the YD7652 via an RJ45 cable - All fixing materials included - Available for both large and small Fleischmann turntables - Very simple installation and adjustment

Regular price: Price to follow
Turntable adapter for stepper motors
YaMoRC YD7652ST-STEP
Turntable adapter for stepper motors

The YD7652ST-STEP is an extension of the turntable control YD7652 for connecting turntables with stepper motor drive. It contains a quiet stepper motor driver, whose settings are controlled by the processor, with micro-steps from 8 to 256 as well as dynamic acceleration and deceleration. A connection for a home or index sensor (for example Hall or infrared) is built in. The supply of the turntable track is passed through by the YD7652 with automatic polarisation. Supply 12 to 19 V Motor current max. 1.2 A Microsteps 8 to 256 Connection for home/index sensor

Regular price: Price to follow