Spare Parts
Centre rail pickup shoe for powered vehicles.
In stock: 2 on the shelf, shipped within 1-3 days
Holder Type 1 for centre-rail pickup shoe.
In stock: 2 on the shelf, shipped within 1-3 days
Holder Type 3 for centre-rail pickup shoe.
In stock: 2 on the shelf, shipped within 1-3 days
Traction tyres, Ø 8.8 mm
In stock: 2 on the shelf, shipped within 1-3 days
Sleeve buffer set, black, round, Ø 4.3 mm, shank 2.2 mm
In stock: 2 on the shelf, shipped within 1-3 days
Holding pins for coupling drawbar
In stock: 2 on the shelf, shipped within 1-3 days
Contents: 50 close coupler heads 701630. For fitting in vehicles with a standard coupler pocket (NEM 362) and a guide mechanism. Compatible with standard couplers (NEM 360).
Content: 50 pc. (CHF 1.12 / 1 pc.)
In stock: 2 on the shelf, shipped within 1-3 days
3 pieces. 13 x 7 x 2.5 mm. For actuating the 7555 switching contact. For locomotives with greater ground clearance.
Content: 3 pc. (CHF 4.97 / 1 pc.)
In stock: 2 on the shelf, shipped within 1-3 days
Color: red. Conductor cross section 0.2 mm². Length 10 m
In stock: 2 on the shelf, shipped within 1-3 days
6-pin data bus replacement cable. Replacement cable for Z21 multiMAUS (10835, 10810), Lokmaus (10760, 10792), turnout keyboard (10770) or RouteControl (10772). It cannot be used to extend connector cables for Lokmaus 1 (Item no. 10750).
In stock: 2 on the shelf, shipped within 1-3 days
Traction tyres for DC locomotives. For wheels with diameter 10.3–12.8 mm. Content: 10 pc./pack.
In stock: 2 on the shelf, shipped within 1-3 days
Traction tyres for DC locomotives. For wheels with diameter 14.7–16.5 mm. Content: 10 pieces/package.
In stock: 2 on the shelf, shipped within 1-3 days
Traction tyres for AC locomotives. For wheels with diameter 12.5–15.3 mm. Content: 10 pieces/package.
In stock: 2 on the shelf, shipped within 1-3 days
Close coupling mechanism retrofit set for two-axle wagons to 140 mm in length. The drawbar has a standard coupler pocket (NEM 362). Without close coupling heads. Content: 12 pieces/package.
In stock: 2 on the shelf, shipped within 1-3 days
Claw coupling for LKAB ore car. Content: 2 pieces/package.
In stock: 2 on the shelf, shipped within 1-3 days
Universal coupling for NEM 362 standard coupler pocket. Content: 12 pieces/package.
In stock: 2 on the shelf, shipped within 1-3 days
New for N and TT gauge: no more unwanted uncoupling at changes of gradient on point tracks and similar places. The ARNOLD magnetic couplers provide simple coupling and uncoupling as well as uncoupling-safe running. Suitable for all NEM 355 coupler pockets. Contents: 10 magnetic couplers.
In stock: 1 on the shelf, shipped within 1-3 days
Point motor with electric motor for under-surface mounting.
In stock: 1 on the shelf, shipped within 1-3 days
Bogie side frame for the 3250-3253 and 3290-92 models, pack of 2.
In stock: 1 on the shelf, shipped within 1-3 days
Spare part: 2 bogie side frames for the 3272 model.
In stock: 1 on the shelf, shipped within 1-3 days
Kit for a transfer installation used to load standard gauge wagons onto transporter bogies.
In stock: 1 on the shelf, shipped within 1-3 days
Ski change-over electronics for use with LokSound/LokPilot decoders V3.5 (or newer) with 21MTC (not MKL) connector. Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping in front of red signals, it is essential that depending on the direction of travel, only one grinder is used to power the decoder. The grinder switch ensures this: it is hung between the pantograph and a LokPilot or LokSound decoder with a 21MTC interface. These generate a control signal that evaluates the grinder switchover electronics and switches the "correct" grinder. It works perfectly in digital and analog mode. The base of the board has the dimensions 43mm x 24mm. Note: The LokPilot Basic V1.0 and MKL decoder are not suitable for the grinder switching electronics.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyres for Fleischmann H0 locomotives: outside diameter 10.6 mm, width 1.3 mm. Available as a single piece (00544007) or as a set of 10 (648005).
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyres for Fleischmann N gauge locomotives: outside diameter 5.5 mm, inside diameter 4.5 mm, width 1.3 mm. Available as a single piece (00547001) or as a set of 10 (948004).
In stock: 1 on the shelf, shipped within 1-3 days