Fences and railings
Wire mesh fence in H0 scale, supplied as a photo-etched metal fret. The fret carries two long fence runs with a very fine diamond mesh, held by a top and bottom rail and divided into bays by vertical posts. A V-shaped brace is etched into one bay of each run. The parts are cut free from the frame for assembly.
In stock: 2 on the shelf, shipped within 1-3 days
Wire mesh fence topped with barbed wire, in H0 scale. The fine diamond mesh is held by a top and bottom rail and divided into bays by full-height posts; three strands of barbed wire run above it. One bay carries a V-shaped brace. The illustration is a line drawing.
In stock: 2 on the shelf, shipped within 1-3 days
Classic handrail, model 1, in H0 scale. The brass-coloured etched fret carries three identical railing strips held to the frame by tabs. The pattern combines vertical bars set with opposed scrolls top and bottom, beneath a continuous handrail. The parts are supplied unpainted.
On order, lead time to be confirmed
Classic handrail, model 2, in H0 scale. The brass-coloured etched fret holds three identical railing strips. The pattern shows oval medallions in the centre of each bay, closed by a palmette below and topped by a fine decorative frieze. The parts are supplied unpainted.
On order, lead time to be confirmed
Classic handrail, model 3, in H0 scale. The brass-coloured etched fret carries three identical railing strips. The pattern is a triangular bar lattice, edged above by a row of rings along the handrail and below by drop-shaped ornaments. The parts are supplied unpainted.
On order, lead time to be confirmed
Classic handrail, model 4, in H0 scale. The brass-coloured etched fret holds three identical railing strips. A broad scroll frieze runs the full length above bars arranged in triangles with heart-shaped ornaments; the pattern is denser than on the other models in the series. The parts are supplied unpainted.
On order, lead time to be confirmed
Classic handrail, model 5, in H0 scale. The brass-coloured etched fret carries three identical railing strips. Two continuous rows of interlocking rings frame vertical bars with a diamond-shaped swelling at mid-height; the design stays straight-lined and open. The parts are supplied unpainted.
On order, lead time to be confirmed
Classic handrail, model 6, in H0 scale. The brass-coloured etched fret carries three identical railing strips held to the frame by tabs. The pattern lines up elongated oval balusters, framed above by a fine frieze and below by a row of scrolls. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 1, in H0 scale, as a brass-coloured etched fret. The design is modern: a continuous handrail with rounded corners above a second rail, the lower half filled with solid panels cut with rectangular openings. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 2, in H0 scale, as a brass-coloured etched fret. It is a plain bar railing with closely spaced vertical infill bars between the handrail and the bottom rail, a mid-height intermediate rail and posts at regular intervals. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 3, in H0 scale, as a brass-coloured etched fret. The railing is divided into square bays, each filled with finely perforated sheet in a regular dot pattern. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 4, in H0 scale, as a brass-coloured etched fret. Vertical bars fill the space between handrail and bottom rail without an intermediate rail; the posts extend downwards for mounting. The bar spacing is closer than on model 2. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 5, in H0 scale, as a brass-coloured etched fret. Upright oval balusters run below the handrail, above a continuous band of small rings. Heavier posts divide the railing into regular bays. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 6, in H0 scale, as a brass-coloured etched fret. Rectangular bays with St Andrew's cross bracing run between the top and bottom rails; each bay is bounded by a vertical post and split at mid-span by a short strut. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 7, in H0 scale, as a brass-coloured etched fret. The infill consists of closely stacked horizontal rails between slim posts, closed at the top by a heavier handrail; there are no vertical bars. The parts are supplied unpainted.
On order, lead time to be confirmed
Fence, model 1, in H0 scale, as a brass-coloured etched fret. Closely spaced vertical pickets with pointed heads project above the top rail; heavier posts divide the fence into regular bays. A separate rail is included as an extra part on the fret. The parts are supplied unpainted.
On order, lead time to be confirmed
Fence, model 2, in H0 scale, as a brass-coloured etched fret. The vertical pickets taper to a point and are crossed at mid-height by a continuous band of rings; a second band of rings runs above it. The parts are supplied unpainted.
On order, lead time to be confirmed
Model 8 handrail in H0 scale, supplied as a photo-etched brass fret. The panels repeat a rectangular frame with diagonal bracing and a central circle, separated by posts with rounded heads. The strips are unpainted and still attached to the fret.
On order, lead time to be confirmed
Model 9 handrail in H0 scale, in photo-etched brass. Each strip combines a top rail with horizontal bars, divided by vertical posts, with closer bar spacing at the ends. The brass is unpainted and still attached to the fret.
On order, lead time to be confirmed