Parts and accessories
Point motor with electric motor for under-surface mounting.
In stock: 1 on the shelf, shipped within 1-3 days
Bogie side frame for the 3250-3253 and 3290-92 models, pack of 2.
In stock: 1 on the shelf, shipped within 1-3 days
Spare part: 2 bogie side frames for the 3272 model.
In stock: 1 on the shelf, shipped within 1-3 days
Kit for a transfer installation used to load standard gauge wagons onto transporter bogies.
In stock: 1 on the shelf, shipped within 1-3 days
Ge 4/4 I drive We offer the revised Ge 4/4 II drive for easy retrofitting of older models of this locomotive type with sound. With a 5-pole motor, 3+1 white LED headlights, LED cab lighting, MTC21 (NEM 660) digital interface, sound preparation and engine room detail. The locomotive body and roof are taken over from the older model. The digital model is fitted with a sound decoder and curve squeal sound. Model details Die-cast drive and gearbox 3+1 white LED headlights LED cab lighting (can be controlled digitally) Drive and current pick-up from all four axles
On order, shipped within 10-21 days
As part of our model upkeep, we regularly revise older locomotive models with 5-pole motors, sound preparation, digital interface and LED lighting (except 1262/1362); gearbox revisions are usually also carried out, or the cabs and interior fittings are shown with improved detail. We offer these new drives for retrofitting older locomotive models. The body and roof of the old locomotive are reused. Simple adaptation work is required on some locomotive bodies. Model details Die-cast drive and gearbox Replica of the engine room fittings Spring packs fitted to the drive 3+1 white LED headlights LED cab lighting (can be controlled digitally) Sound preparation Model variant: digital version with curve squeal sound Drive and current pick-up from all axles
On order, shipped within 10-21 days
The previously available running gear 1262 000/1362 000 is being replaced by new running gear with 3+1 white LED lighting. A Next18 digital interface and sound preparation are further improvements designed to upgrade older models of this locomotive type, and to make their digitisation and sound retrofitting easier. Digital running gear also features sound and cab lighting; the version corresponds to the illustration, without a frame cover. Model features Die-cast chassis Drive and current pick-up on all four axles Digital version with sound LED headlights depending on the direction of travel LED tail lamp Convertible to H0e gauge; rack operation is then no longer possible!
On order, shipped within 10-21 days
Following a tender issued to SBB, MGB awarded the contract for the refurbishment of nine of its originally 13 HGe 4/4 II rack locomotives, built 1986-1990. The HGe 4/4 II 106 served as the prototype. It was completely stripped out and the parts still fit for use were overhauled. This so-called Refit includes the replacement of the main components. Besides the slightly modified design and the LED headlights, the modern air conditioning unit between the bogies is especially visible from the outside. After the work was completed in 2021 and a successful performance test, locomotives were brought into the Refit programme two at a time. In addition to the eight locomotives 101-108 procured by the FO, it also includes the BVZ's HGe 4/4 1 as the ninth locomotive. Model details Die-cast metal chassis Drive and current pick-up on all four axles Working rack drive, Abt system Headlights in the direction of travel Brake hoses, heating couplings and handrails included for self-assembly Convertible to H0e; this makes operation on the rack no longer possible!
On order, lead time to be confirmed
As part of our ongoing model updates, we regularly rework older locomotive models with 5-pole motors, sound preparation, a digital interface and LED lighting (except 1262/1362); gearbox updates are usually also carried out, or the cabs and interior fittings are shown in improved detail. We offer these new running gear units for retrofitting older locomotive models. The body and roof are reused from the old locomotive. Simple adaptation work is required on some locomotive bodies. Model details Die-cast running gear and gearbox Reproduction of the engine room fittings Spring packs mounted on the running gear LED headlights, 3+1, white LED cab lighting (can be switched digitally) Sound-ready Digital version with curve squeal sound Drive and current pick-up from all axles
On order, shipped within 10-21 days
Following a call for tenders, MGB awarded SBB the contract to refurbish nine of its originally 13 rack railway locomotives HGe 4/4 II, built 1986-1990. The HGe 4/4 II 106 served as the prototype. It was completely stripped out and the parts still fit for further use were overhauled. This so-called Refit comprises the replacement of the main components. Besides the slightly altered design and the LED headlamps, the modern air-conditioning unit between the bogies is the most visible external change. After the work was completed in 2021 and a successful performance test, locomotives were added to the Refit programme two at a time. In addition to the eight locomotives 101-108 procured by the FO, it includes the HGe 4/4 1 of the BVZ as the ninth locomotive. Model details Die-cast chassis Drive and current pick-up from all four axles Working rack drive, Abt system Headlight according to the direction of travel Digital model with ESU Loksound decoder Brake hoses, heating couplings and handrails are included for self-assembly Convertible to H0e gauge; operation on the rack is then no longer possible!
- Sound
Pre-order, release expected in Q4 2026
In 1980, following the delivery of the EW II standard coaches, RhB put its latest series of baggage cars into service with the D 4219 to D 4226. Together with the EW I and EW II, they initially shaped the look of the trains on the Albula line as well as that of numerous trains on the home network. In 2010, with the exception of the D 4224, which had been involved in an accident, they were converted into heating vans for Albula express trains – the modernised vehicles can be recognised by the pantograph on the roof. In early 2022, work began on removing the pantograph from the vehicles with an odd running number. Spare parts: 5009 000 Wheelset H0e (10 pcs) 5209 000 Wheelset H0m (10 pcs) 5300 135 Standard coupling A.A (10 pcs) 5400 145 Close coupling adapter (10 pcs) 4770 000 1 Detailing parts
On order, shipped within 10-21 days
In 1980, following delivery of the EW II standard coaches, RhB placed its newest series of baggage cars into service with the D 4219-4226. Together with the EW I and EW II, they initially defined the look of trains on the Albula line and of numerous trains on the home network. In 2010, with the exception of the wrecked D 4224, they were converted into heating vans for Albula express trains – the modernised vehicles can be recognised by the pantograph on the roof. At the beginning of 2022, removal of the pantograph began on the cars with an odd running number. Spare parts: 5009 000 Wheelset H0e (10 pieces) 5209 000 Wheelset H0m (10 pieces) 5300 135 Standard coupling A.A (10 pieces) 5400 145 Close coupling adapter (10 pieces) 4770 000 1 Detailing parts
On order, shipped within 10-21 days
In 1982, at the end of the procurement of the EW II standard coaches, the RhB put the three driving trailers BDt 1721-1723 into service. At first they could only be used with the ABe 4/4 501-504 railcars, later also with the modernised Ge 4/4 I locomotives – they were mainly used in the Engadine or between Davos and Filisur. In the mid-1990s the front doors at the driver's cabs were closed off; around 2006 the BDt 1723 received square headlights. From 2012 to 2013 they underwent a thorough modernisation, during which, besides a new front similar to the "NEVA Retica" driving trailers, they received modern doors and, among other things, braking equipment for the Vereina car-carrying trains. Spare parts 5009 000 wheelsets H0e (10 pcs) 5209 000 wheelsets H0m (10 pcs) 5300 150 standard coupling ACA (10 pcs) 5400 150 close coupling adapter (10 pcs) 5350 100 standard coupling cab (10 pcs) 5450 100 close coupling adapter cab (10 pcs) 4787 000 1 detail parts round headlights 4787 153 1 detail parts 1723 square headlights
On order, shipped within 10-21 days
Replacement disc wheelset for H0e models, wheel diameter 8.0 mm. Pack of 10.
On order, shipped within 10-21 days
Replacement disc wheelset for H0e models, wheel diameter 5.6 mm. Pack of 10.
On order, shipped within 10-21 days
Replacement wheelset for H0e model 3098, wheel diameter 7.9 mm. Pack of 10.
On order, shipped within 10-21 days
H0e replacement wheelset for models 1009 and 1033, pack of 2.
On order, shipped within 10-21 days
H0e replacement wheelset for motor car 7243, pack of 4.
On order, shipped within 10-21 days
H0e replacement wheelset for motor car 7244, pack of 4.
On order, shipped within 10-21 days
Replacement funnel-shaped coupler, pack of 10.
On order, shipped within 10-21 days
Conversion kit to LED lighting with Next18 interface for item 1261.
On order, shipped within 10-21 days
Spare part: diaphragms, retracted, pack of 6.
On order, shipped within 10-21 days
Spare part: diaphragms, extended, pack of 6.
On order, shipped within 10-21 days
Conversion kit to convert the headlight to LED, for item 3287.
On order, shipped within 10-21 days