Railcars and multiple units
In June 1993, the ABe 4/4 36 received special lettering as the only vehicle in the 1930s railcar series, with a bilingual logo and a technical data block well below the decorative stripe, as well as a large running number in bold type. The lettering follows the design used on the railcars of the 1940s/1950s series and on the main-line locomotives, but the body remained plain red, without a differently coloured lower section. Prototype The Bernina line, just over 60 km long and electrically operated on direct current from the outset, began operation with fourteen electric railcars BCe 4/4 1-14, acquired in 1908/1909. Owing to strong demand, three further bogie railcars, the BCFe 4/4 21-23, had to be put into service as early as 1911. These were built with an additional luggage compartment. After the merger with the RhB, most railcars were thoroughly modernised from the mid-1940s, with substantial changes made to the roof, among other things, and the car bodies reclad. The railcars 1, 2, 5 and 4 of the first production series became the BCe 4/4 31-34 in 1946/1947. These four vehicles, together with the BCe 4/4 30, created in 1953 from car 22, were at the same time fitted out for peak-traffic duties on the Arosa line, which was then still operated on 2,200 V DC, and equipped with the roof-rod couplings characteristic of that line. In the course of this electrical conversion, the two lyre pantographs were replaced by a scissors-type pantograph and additional starting and braking resistors were placed on the roof. In 1986, the four railcars remaining after the scrapping of the BCe 4/4 33 in 1962 received multiple-unit control. The railcars 10, 14 and 12 became the BCe 4/4 35-37 in 1949-1951, with a window arrangement differing from that of the 31-34. These somewhat more powerful vehicles remained usable only on the Bernina line as before. Despite the thorough renewal of the electrical equipment, at first only one of the lyre pantographs was replaced by a scissors-type pantograph. Only from 1968 did the ageing pantographs give way to a modern single-arm pantograph – since then, two different modern pantograph types have been fitted to the roof. A one-off among the modernised Bernina veterans is the BCFe 4/4 38, created as early as 1949 from car 21. Its roof-equipment conversions follow those of railcars 35-37, initially with one lyre pantograph and one scissors-type pantograph each. In 1967 the second lyre pantograph was removed, and it was not until 1969 that an additional single-arm pantograph was installed. Unlike cars 35-37, however, the 38 remained the only modernised vehicle to keep its luggage compartment. With the acquisition of the new-build railcars ABe 4/4 51-56, the older railcars were relegated to secondary duties; some were later fitted out for engineering-service purposes. With the commissioning of the "Allegra" railcars, the RhB was even able to withdraw many of the younger railcars ABe 4/4 41-49. Today, only the yellow-painted nostalgia railcars 30+34 are still kept in operational condition.
In stock: 1 on the shelf, shipped within 1-3 days
The RhB railcars ABe 4/4 30 and 34 are among the legendary vehicles of the Rhätische Bahn. With their striking yellow livery, they recall the early days of electric railway operation and are today a popular symbol of nostalgia. Both railcars have been modernised several times over the decades. In their yellow version, they are today often used for historic special excursions and tourist purposes. In doing so, they offer passengers a journey into the past and a unique railway experience in the alpine world of Graubünden. With the technical overhaul of the Bernina line veterans ABe 4/4 30-38, we are upgrading the two yellow heritage railcars with LED headlights and the Next18 digital interface. The digital version is now also equipped with sound.
In stock: 1 on the shelf, shipped within 1-3 days
In the 1930s, the Wismar wagon factory developed a railbus of the "Hannover" type – designed primarily for financially weak light railways with low traffic volumes. A total of 57 railbuses were built for use on standard and narrow-gauge railways with various wheelbases. While running, only the motor positioned at the front in the direction of travel, with an output of 40-50 hp, could be used; the other was switched off.
On order, shipped within 10-21 days
Baggage railcar of the Furka Oberalp Bahn After the first edition of the FO railcar novelty sold out quickly despite generous reserves, with the second edition we are realising the three still-missing running numbers. On the one hand, railcar 41 in the blue/beige livery of the Schöllenenbahn, as well as the BDeh 2/4 45 in dark red livery and the BDeh 2/4 42 with a white stripe. To match, we are also releasing two driving trailer models in dark red and red livery with a white stripe. Model details The railcar model features two differently designed bogies, positioned very far to the outside, both of which are driven in the model, for reasons of tractive effort, by the 5-pole motor with flywheel. Abt rack gear wheels can be fitted in both bogies for rack operation. The drive bogie is refined with separately applied parts; the inner sand boxes cannot be fitted on tight curves due to a collision with the baggage compartment access steps – but are also partly hidden by them. The carrying bogie has, true to the prototype, an asymmetrical pivot point. In the die-cast chassis frame, various components were fitted on the underside for the greatest possible level of detail on the underframe, while maintaining a high adhesive weight. There is a mount in the baggage compartment for the optional installation of a loudspeaker. The white headlights and standard-fitted interior lighting are provided by LEDs; digital interface according to NEM 662/Next18, as with all H0m new developments. The body is fastened to the chassis with four screws, with the roof hoods made externally as perforated plastic parts.
On order, shipped within 10-21 days
After considerable bottlenecks became apparent, especially during the winter high season, in winter sports traffic on the Schöllenen railway to the Andermatt/Oberalp tourist region, in 1972 the FO procured five shuttle trains with the Deh 4/4 51-55 rack baggage railcars, together with corresponding B intermediate coaches and ABt driving trailers. The bogies were largely taken over from the HGm 4/4 61-62 rack diesel locomotives. The BVZ also put into service, with the Deh 4/4 21-24, four rack baggage railcars differing only slightly from these. All eight shuttle-train railcars were still in existence at the time of the merger of the BVZ and the FO into the MGB. With the delivery of new railcar trains, the need for the Deh 4/4 is declining, so that at least some of the railcars will be withdrawn from service in the foreseeable future. Model details Die-cast metal chassis Drive and current pick-up on all four axles Working rack drive, Abt system Headlights in the direction of travel Brake hoses, heating couplings and handrails included for self-assembly Convertible to H0e; this makes operation on the rack no longer possible!
On order, shipped within 10-21 days
After considerable bottlenecks became apparent, especially during the winter high season, in winter sports traffic on the Schöllenen railway to the Andermatt/Oberalp tourist region, in 1972 the FO procured five shuttle trains with the Deh 4/4 51-55 rack baggage railcars, together with corresponding B intermediate coaches and ABt driving trailers. The bogies were largely taken over from the HGm 4/4 61-62 rack diesel locomotives. The BVZ also put into service, with the Deh 4/4 21-24, four rack baggage railcars differing only slightly from these. All eight shuttle-train railcars were still in existence at the time of the merger of the BVZ and the FO into the MGB. With the delivery of new railcar trains, the need for the Deh 4/4 is declining, so that at least some of the railcars will be withdrawn from service in the foreseeable future. Model details Die-cast metal chassis Drive and current pick-up on all four axles Working rack drive, Abt system Headlights in the direction of travel Brake hoses, heating couplings and handrails included for self-assembly Convertible to H0e; this makes operation on the rack no longer possible!
On order, shipped within 10-21 days
After the electrification of the RhB was completed in 1922, line locomotives with rod drive of various power classes were initially procured. Following the trend of the time, four lightweight railcars were ordered from the Swiss locomotive industry in 1938, in order to increase travel speed and to tighten the timetable. The railcars ABe 4/4 501-504, capable of 70 km/h, were delivered in 1939/40 and were initially used mainly in the Engadin in mixed passenger and goods service as tractor railcars. Together with the lightweight steel coaches A 1251-1252 and B 2301-2306 procured at the same time, they ran in the 1940s as the "Fliegende Rhätier" between Chur and St Moritz as well as Davos and Disentis. After the progressive delivery of more powerful bogie locomotives, the railcars were rebuilt between 1968 and 1970 and fitted with multiple-unit control. With the three driving trailers BDt 1721-1723 put into service in 1982, three two-part push-pull trains were formed together with the railcars 501-504. Their home route became the short connecting line Samedan-Pontresina, where additional coaches or through coaches were often attached. They also provided further services on the line to the Lower Engadin or as winter sports trains in the Davos area. At the end of the 1980s, they could be found together with the first Ge 4/4 I push-pull train between Davos and Filisur. After the formation of longer push-pull trains with the Ge 4/4 I, modernised centre-entrance coaches and the three driving trailers 1721-1723, the railcars lost their area of operation. To this day, only the ABe 4/4 501 has been preserved in the heritage vehicle fleet.
On order, shipped within 10-21 days
As a matching power car for the new edition of the two-axle coaches, we are producing the Bernina railcar ABe 4/4 34 as it appeared after its repainting from green/cream to red, lettered RhB. It ran in this livery from 1962 until the early 1980s, when it was relettered with the multilingual logo. Prototype The Bernina line, a good 60 km long and electrically operated on direct current from the outset, began operation with fourteen electric railcars BCe 4/4 1-14 procured in 1908/1909. Due to high demand, three further bogie railcars, the BCFe 4/4 21-23, had to be put into service as early as 1911. These were built with an additional luggage compartment. After the merger with RhB, most of the railcars were fundamentally modernised from the mid-1940s onwards, with considerable changes made to the roof, among other things, and the car bodies re-panelled. Railcars 1, 2, 5 and 4 of the first production series became the BCe 4/4 31-34 in 1946/1947. These four vehicles, along with the BCe 4/4 30 created in 1953 from car 22, were at the same time prepared for peak-traffic duties on the Arosa line, which was still operated on 2200 V DC at the time, and were fitted with the roof rod couplings characteristic of that line. During the electrical conversion, the two lyre pantographs were replaced by a scissors-type pantograph and additional starting and braking resistors were placed on the roof. In 1986, the four railcars remaining after the scrapping of BCe 4/4 33 in 1962 received multiple-unit control. Railcars 10, 14 and 12 became the BCe 4/4 35-37 in 1949-1951, with a window arrangement differing from that of the 31-34. These somewhat more powerful vehicles remained usable only on the Bernina line. Despite the fundamental renewal of the electrical equipment, initially only one of the lyre pantographs was replaced by a scissors-type pantograph. Only from 1968 did the antiquated pantographs give way to a modern single-arm pantograph – since then, two different modern pantographs have been present on the roof. A loner among the modernised Bernina veterans is the BCFe 4/4 38, created as early as 1949 from car 21. As regards roof equipment, the conversions follow those of railcars 35-37, initially with one lyre pantograph and one scissors-type pantograph each. In 1967 the second lyre pantograph was removed, and it was not until 1969 that an additional single-arm pantograph was installed. Unlike cars 35-37, however, the 38 retained its luggage compartment, as the only modernised vehicle to do so. With the procurement of the new-build railcars ABe 4/4 51-56, the older railcars were relegated to subordinate duties; some were later converted for service vehicle purposes. With the commissioning of the "Allegra" railcars, RhB was even able to withdraw many of the younger railcars ABe 4/4 41-49. Today, only the yellow-painted heritage railcars 30+34 are still kept operational.
On order, shipped within 10-21 days
The RhB railcars ABe 4/4 30 and 34 are among the legendary vehicles of the Rhätische Bahn. With their striking yellow livery, they recall the early days of electric railway operation and are today a popular symbol of nostalgia. Both railcars have been modernised several times over the decades. In their yellow version, they are now often used for historic special trips and tourist purposes. In doing so, they offer passengers a journey into the past and a unique railway experience in the Grisons Alpine world. With the technical overhaul of the Bernina railway veterans ABe 4/4 30-38, we are upgrading the two yellow heritage railcars with LED headlight lighting and the Next18 digital interface. The digital version is now also fitted with sound.
On order, shipped within 10-21 days
Detailed model reproduction of the Bernina line railcar ABe 4/4 55 "Diavolezza" in red livery with a brown side skirt. Prototype Based on the latest technical knowledge, the modern railcars ABe 4/4 51-53 using converter technology were delivered to the Bernina railway by Schindler Waggon in 1988. They are fitted with regenerative brakes to feed back the energy recovered during braking and, at a service weight of 47 t, can haul a load of 95 t on 70‰ gradients at a speed of 40 km/h, compared with 70 t at 25 km/h for the preceding vehicles of the 40 series. In 1990, three further vehicles followed, with running numbers 54-56. Like their preceding series ABe 4/4 41-49 and Gem 4/4 801-802, they have a maximum speed of 65 km/h and, thanks to multiple-unit control, can be used universally together with them in passenger service or in snow-clearing duty. As more and more "Capricorn" trains enter service, "Allegra" dual-voltage railcars can be freed up for the Bernina line, so that the 50 series railcars, used in pairs, are currently only needed for the peak season and could one day, in a future that is no longer so distant, be taken out of service. Model details Die-cast metal chassis Drive and current pick-up on all four axles Model variant: digital version with sound decoder LED headlight that changes with the direction of travel Brake hoses, heating couplings and handrails included for self-assembly Convertible to H0e (replacement wheelsets available as an option)
On order, shipped within 10-21 days
Detailed model reproduction of the Bernina line railcar ABe 4/4 53 with the "Tirano" crest and new red livery with a grey side skirt. Prototype Based on the latest technical knowledge, the modern railcars ABe 4/4 51-53 using converter technology were delivered to the Bernina railway by Schindler Waggon in 1988. They are fitted with regenerative brakes to feed back the energy recovered during braking and, at a service weight of 47 t, can haul a load of 95 t on 70‰ gradients at a speed of 40 km/h, compared with 70 t at 25 km/h for the preceding vehicles of the 40 series. In 1990, three further vehicles followed, with running numbers 54-56. Like their preceding series ABe 4/4 41-49 and Gem 4/4 801-802, they have a maximum speed of 65 km/h and, thanks to multiple-unit control, can be used universally together with them in passenger service or in snow-clearing duty. As more and more "Capricorn" trains enter service, "Allegra" dual-voltage railcars can be freed up for the Bernina line, so that the 50 series railcars, used in pairs, are currently only needed for the peak season and could one day, in a future that is no longer so distant, be taken out of service. Model details Die-cast metal chassis Drive and current pick-up on all four axles Model variant: digital version with sound decoder LED headlight that changes with the direction of travel Brake hoses, heating couplings and handrails included for self-assembly Convertible to H0e (replacement wheelsets available as an option)
On order, shipped within 10-21 days
In the 1930s, the Waggonfabrik Wismar developed a railbus of the “Hannover” type, primarily for financially weak light railways with low traffic volumes. A total of 57 railbuses were built for use on standard and narrow-gauge lines with various wheelbases. While running, only the engine positioned at the front in the direction of travel, with an output of 40-50 hp, could be used; the other one was shut down.
- 2-rail, direct current
On order, shipped within 10-21 days
The RhB ABe 4/16 railcars, including the 3113 "Calanda", represent modern mobility on the Rhätische Bahn. Named after the striking Calanda mountain massif, this railcar is part of the powerful Capricorn fleet, designed for regional and express services on the metre-gauge network. The ABe 4/16 3113 caused a sensation in July 2022 when it set an impressive speed record in the Vereina Tunnel: 163.02 km/h – a record for narrow-gauge lines. This milestone illustrates the performance and technical innovation of the modern RhB railcars. With their high acceleration, modern equipment and a comfortable passenger area, the Capricorn trains such as the 3113 "Calanda" shape the forward-looking operation of the Rhätische Bahn. Model details Four-part railcar consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED light functions All vehicles with interior lighting All four coaches with a Next18 digital interface (NEM 662) Digital model: railcar with sound decoder, driving trailer with function decoder.
Pre-order, release expected in Q4 2026
The RhB Capricorn in VBZ livery – Order deadline 1.7.2026 With the ABe 4/16 3165 "Weissfluh" train, we want to give our customers what is probably a unique opportunity to bring the blue and white colours of the VBZ onto their own model railway tracks. And to add some variety to the fleet of the new RhB flagship train, procured in large numbers and dominated by the colour red. The trains are being manufactured as part of the production run of the already announced trains 3113 "Calanda" and 3133 "Piz Palü". Please note the order deadline of 1.7.2026 to secure your "Capricorn" train in VBZ livery, scale 1:87. Model details Four-part multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED light functions All vehicles with interior lighting All four coaches with a Next18 (NEM 662) digital interface Digital model: railcar with sound decoder, driving trailer with function decoder.
Pre-order, release expected in Q4 2026
The RhB ABe 4/16 railcars, including the 3113 "Calanda", represent modern mobility on the Rhätische Bahn. Named after the striking Calanda mountain massif, this railcar is part of the powerful Capricorn fleet, designed for regional and express services on the metre-gauge network. The ABe 4/16 3113 caused a sensation in July 2022 when it set an impressive speed record in the Vereina Tunnel: 163.02 km/h – a record for narrow-gauge lines. This milestone illustrates the performance and technical innovation of the modern RhB railcars. With their high acceleration, modern equipment and a comfortable passenger area, the Capricorn trains such as the 3113 "Calanda" shape the forward-looking operation of the Rhätische Bahn. Model details Four-part railcar consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED light functions All vehicles with interior lighting All four coaches with a Next18 digital interface (NEM 662) Digital model: railcar with sound decoder, driving trailer with function decoder.
- Sound
Pre-order, release expected in Q4 2026
The RhB Capricorn in VBZ design – Order deadline: 1.7.2026 With the train ABe 4/16 3165 "Weissfluh", we would like to give our customers what is probably a unique opportunity to bring the blue/white colours of VBZ onto their own model railway. And to add some variety to the fleet of the newly procured RhB flagship train, which has been ordered in large numbers and is dominated by the colour red. These trains are being produced as part of the production run of the already announced trains 3113 "Calanda" and 3133 "Piz Palü". Please note the order deadline of 1.7.2026 to secure your "Capricorn" train in VBZ livery at 1:87 scale. Model details Four-part railcar consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED light functions All vehicles with interior lighting All four coaches with a Next18 digital interface (NEM 662) Digital model: railcar with sound decoder, driving trailer with function decoder.
- Sound
Pre-order, release expected in Q4 2026
RhB "Capricorn" – now also for H0 standard gauge! The ABe 4/16 3113 caused a sensation when it set an impressive speed record in the Vereina Tunnel in July 2022: 163.02 km/h – a record for narrow-gauge lines. This milestone demonstrates the performance and technical innovation of the modern RhB multiple units. The Capricorn is being offered for the first time with modified bogies, also for H0 standard gauge in 2-rail DC and 3-rail AC. The champagne-coloured train 3133 is also being produced with the standard-gauge running gear. Model details Four-car multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 3-rail, alternating current
- Sound
Pre-order, release expected in Q4 2026
RhB "Capricorn" – now also for H0 standard gauge! The ABe 4/16 3113 caused a sensation when it set an impressive speed record in the Vereina Tunnel in July 2022: 163.02 km/h – a record for narrow-gauge lines. This milestone demonstrates the performance and technical innovation of the modern RhB multiple units. The Capricorn is being offered for the first time with modified bogies, also for H0 standard gauge in 2-rail DC and 3-rail AC. The champagne-coloured train 3133 is also being produced with the standard-gauge running gear. Model details Four-car multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 3-rail, alternating current
- Sound
Pre-order, release expected in Q4 2026
The RhB Capricorn in VBZ design – order deadline 1 July 2026 With the train ABe 4/16 3165 "Weissfluh", we would like to give our customers what is probably a unique opportunity to bring the blue and white colours of the VBZ onto their home model railway tracks. And to add some variety to the fleet of the new RhB flagship train, procured in large numbers and dominated by the colour red. The trains are being made alongside the production of the already announced 3113 "Calanda" and 3133 "Piz Palü" trains. Please note the order deadline of 1 July 2026 to secure your "Capricorn" train in VBZ design, in 1:87 scale. Model details Four-car multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 3-rail, alternating current
- Sound
Pre-order, release expected in Q4 2026
RhB "Capricorn" – now also for H0 standard gauge! The ABe 4/16 3113 caused a sensation when it set an impressive speed record in the Vereina Tunnel in July 2022: 163.02 km/h – a record for narrow-gauge lines. This milestone demonstrates the performance and technical innovation of the modern RhB multiple units. The Capricorn is being offered for the first time with modified bogies, also for H0 standard gauge in 2-rail DC and 3-rail AC. The champagne-coloured train 3133 is also being produced with the standard-gauge running gear. Model details Four-car multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 2-rail, direct current
- Sound
Pre-order, release expected in Q4 2026
RhB "Capricorn" – now also in H0 standard gauge! The ABe 4/16 3113 caused a sensation in July 2022 when it set an impressive speed record in the Vereina Tunnel: 163.02 km/h – a record for narrow-gauge lines. This milestone demonstrates the performance and technical innovation of the modern RhB railcars. The Capricorn is being offered for the first time with modified bogies also for H0 standard gauge in 2-rail DC and 3-rail AC. The champagne-coloured train 3133 is also produced with the standard-gauge running gear. Model details Four-part multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 2-rail, direct current
- Sound
Pre-order, release expected in Q4 2026
The RhB Capricorn in VBZ livery – order deadline 1 July 2026 With the train ABe 4/16 3165 "Weissfluh", we would like to give our customers the probably unique chance to bring the blue/white colours of the VBZ onto their home model railway tracks. And to lighten up the fleet, dominated by the colour red, of the RhB's new star train, which has been procured in large numbers. The trains are manufactured as part of the production of the already announced trains 3113 "Calanda" and 3133 "Piz Palü". Please note the order deadline of 1 July 2026 to secure your "Capricorn" train in VBZ livery in scale 1:87. Model details Four-part multiple unit consisting of a motor coach, a driving trailer and two intermediate coaches End coaches with numerous LED lighting functions All vehicles have interior lighting All four coaches have a Next18 digital interface (NEM 662) Electric close coupling between the respective end and intermediate coaches Close coupling between the two intermediate coaches Motor coach with sound decoder, driving trailer with function decoder.
- 3-rail, alternating current
- Sound
Pre-order, release expected in Q4 2026
Tower railcar In 1963, the Rhätische Bahn (RhB) put the tower railcar Xm 2/2 9916 into service, specifically for overhead line maintenance on the Bernina line. The vehicle is largely based on the design of the Tm 2/2 56-67 shunting tractors (later 15-26) and can also be used on the main network and on the Arosa line. Over the course of its service life, the tower railcar underwent several colour changes: originally painted oxide red, it received an orange livery between 1988 and 1997, before finally adopting its current yellow appearance. The vehicle was continuously developed further, with the roof superstructures being optimised in particular. In 1997 and 2002, a comprehensive modernisation took place, during which the working platform in particular was adapted to current occupational safety requirements. Model details Small-series model in white metal and brass Rotatable and extendable working platform with movable railings Etched parts used in the roof superstructures Drive and current pick-up via both axles Bell-armature motor Prepared for sound Digital version with sound decoder LED headlight 3+1 white Cannot be converted to H0e!
release expected in Q4 2026
Tower railcar In 1963 the Rhätische Bahn put the Xm 2/2 9916 tower railcar into service, specially designed for overhead line maintenance work on the Bernina line. The vehicle is largely based on the design of the Tm 2/2 56-67 shunting tractors (later 15-26) and can also be used on the home network and on the Arosa line. During its service life, the tower railcar underwent several colour changes: originally painted oxide red, it received an orange livery between 1988 and 1997, before finally adopting its current yellow appearance. The vehicle was continuously developed, with the roof superstructures in particular being optimised. In 1997 and 2002 a comprehensive modernisation took place, in which the working platform in particular was adapted to current occupational safety requirements. Model details Small-series model in white metal and brass rotating and extendable working platform with movable railings etched parts fitted in the roof superstructures drive and current pick-up via both axles bell-armature motor sound-ready digital version with sound decoder 3+1 white LED headlight Cannot be converted to H0e!
- Sound