Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rhaetian Railway at 1:45 (0m)

Filter products
0m right-hand point 1:5.5 (10.3°), R 1200, L 371.7
BEMO 9122000 Scale 0m
0m right-hand point 1:5.5 (10.3°), R 1200, L 371.7

Right-hand point 1:5.5 (10.3°), R 1200 mm, L = 371.7 mm We have found a new partner for finescale points in 0m gauge. The sleepers, produced using 3D printing, have a reproduced wood-grain structure on their upper surface. The rail profile matches our flexible track. With regard to the geometry, we deliberately chose a compactly built point with a 10.3° turnout angle and a track radius of R 1200 mm, as this suits most layout situations.

Regular price: CHF 210.00

On order, lead time to be confirmed

0m left-hand point 1:5.5 (10.3°), R 1200, L 371.7
BEMO 9123000 Scale 0m
0m left-hand point 1:5.5 (10.3°), R 1200, L 371.7

Right-hand point 1:5.5 (10.3°), R 1200 mm, L = 371.7 mm We have found a new partner for finescale points in 0m gauge. The sleepers, manufactured using 3D printing, have a reproduced timber structure on top. The track profile matches our flexible track. As for the geometry, we deliberately chose a compactly built point with a 10.3° turnout angle and a track radius of R 1200 mm, as this suits most layout situations.

Regular price: CHF 210.00

On order, lead time to be confirmed

0m flexible track, concrete sleepers, kit 1 m
BEMO 9131000 Scale 0m
0m flexible track, concrete sleepers, kit 1 m

Flexible track in 0m scale with concrete sleepers. Assembly kit, length 1 m.

Regular price: CHF 31.00

On order, shipped within 10-21 days

RhB Ge 2/4 221 rod locomotive
BEMO 9256111 Scale 0m
RhB Ge 2/4 221 rod locomotive

The replacement of the 57 steam locomotives in total was initiated in 1912/1913 by the Ge 4/6, driven via jackshafts and diagonal rods. In addition to these twin-motor rod locomotives rated at 600, later 800 hp, running at 55 km/h, seven single-motor Ge 2/4 201-207 of about 300 hp were procured in 1913 for light duties and as pilot locomotives. The "Crocodiles" Ge 6/6 I 401-415, placed in service between 1921 and 1929, eventually took over heavy main-line service and displaced the Ge 4/6 301-302, 351-355 and 391 to lighter duties. The Ge 2/4 were therefore increasingly used in shunting service, where the two cabs and the limited rearward visibility proved disadvantageous. In 1943 and 1946 respectively, three locomotives were therefore converted into shunting locomotives with a central cab: the Ge 2/4 201+206 became the Ge 2/4 213+212, and the Ge 2/4 202 became the Gea 2/4 211, fitted with an additional battery so that it could also work sidings not equipped with overhead line. In 1967 this locomotive received a diesel engine in place of the battery drive, hence the designation Gem 2/4 211. The new shunting locomotives exchanged their large traction motors for smaller ones rated at 310 hp. In 1946 two further locomotives, 203 and 204, were modernised, leaving only the Ge 2/4 205 and 207, kept as reserve locomotives, close to their as-delivered condition with two scissors-type pantographs. The two modernised machines, designated Ge 2/4 221-222, were intended for light main-line duties and pilot assignments; with 610 hp they had an installed output similar to that of the oldest Ge 4/6, but with a lower adhesive weight. They also received a powerful electric resistance brake, recognisable by the distinctive roof superstructure replacing the second scissors-type pantograph. With the delivery of more modern main-line vehicles, these two machines eventually also found use in shunting. Apart from the Ge 2/4 205 and 207, preserved in non-operational condition, only locomotive 222 escaped the cutting torch; it now belongs to the RhB's heritage fleet. Finescale model of the heritage rod locomotive Ge 2/4 221 as it looked up to around 1955 with a small rail guard, or Ge 2/4 222 in its current condition with a large rail guard Model version Driven by a bell-armature motor via a worm/spur gear onto both driving axles Current pick-up through all four wheelsets Sprung Bissel leading wheelsets MTC21 digital interface (NEM 660) With detailed engine room and cab interior details Numerous LED lighting functions Digital model with sound and pantograph drive by servo motor.

Regular price: CHF 1,299.00

On order, shipped within 10-21 days

RhB Ge 4/4 II 611 heritage locomotive "Green & Chrome"
BEMO 9258110 Scale 0m
RhB Ge 4/4 II 611 heritage locomotive "Green & Chrome"

The first-built Ge 4/4 II was taken over by the Green & Chrome foundation into the RhB's heritage fleet and restored, in terms of colour, to its delivery condition. Due to operational requirements for full usability, the current brake and electric coupling equipment was retained. It kept the rectangular headlights fitted at a later date. Please note that, owing to minimum quantities required for material procurement, painting and printing, production can only take place if there are sufficient orders for the total of all model variants. Model details Bell-armature motor, drive on all 4 axles Pantographs in brass Etched roof walkways Detailed engine room fittings Movable mirrors Stainless steel solid wheels, painted anthracite grey on the inside Fitted at the factory with Kadee couplings Prepared for screw coupling

Regular price: CHF 1,379.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 616 universal locomotive "Filisur"
BEMO 9258126 Scale 0m
RhB Ge 4/4 II 616 universal locomotive "Filisur"

Following the last edition in 2021, we are producing a third edition of the bogie locomotive Ge 4/4 II 611-633 in the anniversary year. A locomotive of the first production series in red livery with round headlights and a new pantograph contact strip. Please note that, owing to minimum quantities required for material procurement, painting and printing, production can only take place if there are sufficient orders for the total of all model variants. Model details Bell-armature motor, drive on all 4 axles Pantographs in brass Etched roof walkways Detailed engine room fittings Movable mirrors Stainless steel solid wheels, painted anthracite grey on the inside Fitted at the factory with Kadee couplings Prepared for screw coupling

Regular price: CHF 1,379.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 630 "100 Jahre Chur – Disentis"
BEMO 9258140 Scale 0m
RhB Ge 4/4 II 630 "100 Jahre Chur – Disentis"

Between 2010 and 2014, the RhB each celebrated the 100th anniversary of the opening of a line with a ceremony: the Bernina line (2010), the line through the Ruinaulta to Disentis (2012), the Engadine line (2013) and the Arosa line (2014). For each of these events, a Ge 4/4 II (with square headlights) was given a uniform design adapted to the respective region. Following the Bernina line anniversary locomotive, we are now producing the anniversary locomotive "100 Jahre Chur – Disentis". Please note that, due to minimum quantities required for material procurement, painting and printing, production can only take place if there are sufficient orders across all model variants combined. Model details Bell-armature motor, drive on all 4 axles Pantographs in brass etched roof walkways detailed engine room interior movable mirrors stainless steel disc wheels, painted anthracite grey on the inside fitted at the factory with Kadee couplings prepared for screw coupling

Regular price: CHF 1,399.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 626 "Alpine Classic Pullman Express"
BEMO 9258176 Scale 0m
RhB Ge 4/4 II 626 "Alpine Classic Pullman Express"

The RhB's newest locomotive colour scheme is the Ge 4/4 II 626, designed by the "pro Salonwagen RhB" association in the style of the "Alpine Classic Pullman Express". It was named "Alby Glatt" in autumn 2025 as part of the "25 Jahre ACPE" anniversary. This gives them a train locomotive whose colours match the saloon coaches and which can maintain the required minimum speed in the intensified half-hourly schedule without delaying other trains. We support the "Verein pro Salonwagen RhB" with a donation for every locomotive sold, towards their project to reupholster the historic saloon coaches As 1141-1144. Please note that, due to minimum quantities required for material procurement, painting and printing, production can only take place if there are sufficient orders across all model variants combined. Model details Bell-armature motor, drive on all 4 axles Pantographs in brass etched roof walkways detailed engine room interior movable mirrors stainless steel disc wheels, painted anthracite grey on the inside fitted at the factory with Kadee couplings prepared for screw coupling

Regular price: CHF 1,439.00

Pre-order, release expected in Q1 2027

RhB Ge 2/4 222 nostalgic locomotive, Sound
BEMO 9356122 Scale 0m
RhB Ge 2/4 222 nostalgic locomotive, Sound

The replacement of the 57 steam locomotives in total began in 1912/1913 with the Ge 4/6, driven via jackshafts and inclined rods. In addition to these 600, and later 800, hp twin-motor rod-coupled locomotives running at 55 km/h, seven single-motor Ge 2/4 201-207 of about 300 hp were procured in 1913 for light duties and as pilot locomotives. The "Crocodiles" Ge 6/6 I 401-415, put into service between 1921 and 1929, eventually took over heavy main-line duties and displaced the Ge 4/6 301-302, 351-355 and 391 to lighter duties. The Ge 2/4 were therefore increasingly used for shunting, where the two cabs and the limited rearward visibility proved disadvantageous. In 1943 and 1946 respectively, three locomotives were therefore converted into shunting locomotives with a central cab: the Ge 2/4 201+206 became the Ge 2/4 213+212, and the Ge 2/4 202 became the Gea 2/4 211, fitted with an additional battery so that it could serve siding connections not covered by overhead line. In 1967, this locomotive received a diesel engine in place of the battery drive, hence the designation Gem 2/4 211. The new shunting locomotives exchanged their large traction motors for smaller ones rated at 310 hp. In 1946, two further locomotives, 203 and 204, were modernised, leaving only the Ge 2/4 205 and 207, kept as reserve locomotives, in a condition similar to that on delivery, with two scissors-type pantographs. The two modernised locomotives, designated Ge 2/4 221-222, were intended for light main-line duties and pilot work; they had an installed output of 610 hp, similar to the oldest Ge 4/6, but with a lower adhesive weight. They were also fitted with a powerful electric resistance brake, recognisable by the distinctive roof superstructure in place of the second scissors-type pantograph. With the delivery of modern main-line vehicles, these two locomotives eventually also found use in shunting. Apart from the Ge 2/4 205 and 207, preserved in non-operational condition, only locomotive 222 escaped the cutting torch; it now belongs to the RhB's heritage fleet. Finescale model of the nostalgic rod-coupled locomotive Ge 2/4 221 as it looked up to around 1955 with a small rail guard, or the Ge 2/4 222 in its current condition with a large rail guard Model version Driven by a bell-armature motor via a worm/spur gear onto both driving axles Current pick-up through all four wheelsets sprung Bissel leading axles MTC21 digital interface (NEM 660) with detailed engine room and cab interior details numerous LED lighting functions Digital model with sound and pantograph drive by servo motor.

  • Sound

Regular price: CHF 1,459.00

On order, shipped within 10-21 days

RhB Ge 4/4 II 611 nostalgic locomotive "Green & Chrome", Sound
BEMO 9358110 Scale 0m
RhB Ge 4/4 II 611 nostalgic locomotive "Green & Chrome", Sound

The first Ge 4/4 II built was taken into the RhB's heritage fleet by the Grün & Chrom foundation and restored, in terms of colour, to its as-delivered condition. For operational reasons, to allow full use in service, the current brake and electric coupling equipment was retained. It retained the rectangular headlights fitted at a later date. Please note that, due to minimum quantities required for material procurement, painting and printing, production can only take place if there are sufficient orders across all model variants combined. Model details Bell-armature motor, drive on all 4 axles pantographs driven by servo motors Pantographs in brass etched roof walkways detailed engine room interior movable mirrors ESU L decoder version 5 with Powerpack various lighting functions stainless steel disc wheels, painted anthracite grey on the inside fitted at the factory with Kadee couplings prepared for screw coupling

  • Sound

Regular price: CHF 1,679.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 616 universal locomotive "Filisur", sound
BEMO 9358126 Scale 0m
RhB Ge 4/4 II 616 universal locomotive "Filisur", sound

After the last edition in 2021, we are producing a third edition of the Ge 4/4 II 611-633 bogie locomotive in this anniversary year. Locomotive from the first production series in red livery, with round headlights and a new pantograph contact strip. Please note that production can only take place if order quantities are sufficient across all model variants combined, due to minimum quantities required for material procurement, painting and printing. Model details Bell-armature motor, drive to all 4 axles Pantographs driven by servo motors Pantographs in brass Etched roof walkways Detailed engine room fittings Movable mirrors ESU L decoder version 5 with Powerpack Various lighting functions Stainless steel disc wheels, painted anthracite grey on the inside Fitted at the factory with Kadee couplings Prepared for screw coupling

  • Sound

Regular price: CHF 1,679.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 630 locomotive "100 Jahre Chur - Disentis", sound
BEMO 9358140 Scale 0m
RhB Ge 4/4 II 630 locomotive "100 Jahre Chur - Disentis", sound

Between 2010 and 2014, the RhB celebrated the 100th anniversaries of the Bernina railway (2010), the line through the Ruinaulta to Disentis (2012), the Engadine line (2013) and the Arosa railway (2014), each with a formal ceremony. For each of these occasions, a Ge 4/4 II (with square headlights) was decorated in a uniform design adapted to the region concerned. Following the Bernina railway anniversary locomotive, we are now producing the anniversary locomotive "100 Jahre Chur - Disentis". Please note that production can only take place if order quantities are sufficient across all model variants combined, due to minimum quantities required for material procurement, painting and printing. Model details Bell-armature motor, drive to all 4 axles Pantographs driven by servo motors Pantographs in brass Etched roof walkways Detailed engine room fittings Movable mirrors ESU L decoder version 5 with Powerpack Various lighting functions Stainless steel disc wheels, painted anthracite grey on the inside Fitted at the factory with Kadee couplings Prepared for screw coupling

  • Sound

Regular price: CHF 1,699.00

Pre-order, release expected in Q1 2027

RhB Ge 4/4 II 626 locomotive "Alpine Classic Pullman Express", sound
BEMO 9358176 Scale 0m
RhB Ge 4/4 II 626 locomotive "Alpine Classic Pullman Express", sound

The latest RhB locomotive colour creation is the Ge 4/4 II 626, designed by the "pro Salonwagen RhB" association in the livery of the "Alpin Classic Pullman Express". It was named "Alby Glatt" in autumn 2025 as part of the "25 Jahre ACPE" anniversary. This gives the railway a train locomotive matching the saloon coaches in colour, capable of maintaining the required minimum speed in the intensified half-hourly service without delaying other trains. We are supporting the "Verein pro Salonwagen RhB" with a donation for every locomotive sold, towards their project to re-upholster the historic saloon coaches As 1141-1144. Please note that production can only take place if order quantities are sufficient across all model variants combined, due to minimum quantities required for material procurement, painting and printing. Model details Bell-armature motor, drive to all 4 axles Pantographs driven by servo motors Pantographs in brass Etched roof walkways Detailed engine room fittings Movable mirrors ESU L decoder version 5 with Powerpack Various lighting functions Stainless steel disc wheels, painted anthracite grey on the inside Fitted at the factory with Kadee couplings Prepared for screw coupling

  • Sound

Regular price: CHF 1,739.00

Pre-order, release expected in Q1 2027

RhB E 6635 high-sided open wagon with timber side walls, dark brown
BEMO 9451115 Scale 0m
RhB E 6635 high-sided open wagon with timber side walls, dark brown

Between 1911 and 1913, RhB acquired the high-sided wagons L3 6601-6670 for the transport of weather-resistant goods. The timber-planked wagons had a wheelbase of 4.7 m and an overall length of 8.89 m. In the early 1970s, nine of these wagons were converted into the flat wagons K-w 7501-7509. From 1977, almost two dozen of the high-sided wagons, by then designated E 6601-6670, were fitted with new steel superstructures and designated Fb 8501-8523. Others later served as the basis for privately owned wagons or service vehicles. The latter are today the last representatives of this wagon type. Various special wagons have long since replaced them. With the E 6635, we offer the high-sided wagon in a brown livery. Various load inserts (item no. 9400 991-994) are available for this goods wagon. Model version Model in 1:45 scale (0m fine scale) and 22.2 mm gauge Applied strips on the wagon body for a realistic rendering of the double-T beam profile Movable side doors with locking mechanism Wagon floor with chequer plate Applied brake rigging with brake shoes at wheelset level Applied brake lines Metal wheels with inside profiling Printed wheelset markings Fitted at the factory with Kadee couplings

Regular price: CHF 210.00

On order, shipped within 10-21 days

RhB Fd 8662 ballast wagon
BEMO 9453112 Scale 0m
RhB Fd 8662 ballast wagon

Self-unloading hopper wagon – NEW TOOLING in 0m In 1965, the RhB purchased ten two-axle self-unloading hopper wagons OS 8656-8665 from the Talbot company. Designated Fd from 1969, these wagons have a load capacity of 15 t. They can be used in shorter, model-railway-friendly block trains across several eras. They were eventually renumbered as service vehicles Xc 9416-9425, and some vehicles were taken over by the MOB. Similar vehicles were later also supplied under licence to other railways, such as the FO, MOB and SBB Brünig. In creating the model, particular attention was paid to the detailed representation of the frame construction, especially the braking equipment and the operation of the loading flaps. The ballast container is fitted with a removable load insert, which can be realistically loaded with model ballast.

Regular price: CHF 225.00

Pre-order, release expected in Q4 2026

RhB Fd 8657 ballast wagon
BEMO 9453117 Scale 0m
RhB Fd 8657 ballast wagon

Self-unloading wagon – NEW TOOLING in 0m In 1965, RhB acquired from Talbot the ten two-axle self-unloading wagons OS 8656-8665. Designated Fd from 1969, these wagons have a load capacity of 15 t. They can be used in shorter, model-railway-friendly block trains across several eras. They were eventually renumbered as service vehicles Xc 9416-9425, and some vehicles were taken over by the MOB. Similar vehicles were later also supplied under licence to other railways, such as the FO, MOB and SBB Brünig. In creating the model, particular attention was paid to the detailed depiction of the frame construction, especially the braking equipment and the operation of the loading flaps. The ballast hopper is fitted with a removable load insert that can be realistically loaded with model ballast.

Regular price: CHF 225.00

Pre-order, release expected in Q4 2026

RhB Fd 8658 ballast wagon, brown, 0m
BEMO 9453118 Scale 0m
RhB Fd 8658 ballast wagon, brown, 0m

Self-unloading wagon – NEW TOOLING in 0m In 1965, the RhB acquired from the Talbot company the ten two-axle self-unloading wagons OS 8656-8665. Designated Fd from 1969, these wagons have a load capacity of 15 t. They can be used in several eras in shorter, model-railway-friendly block trains. They were eventually renumbered as service vehicles Xc 9416-9425, and some vehicles were taken over by the MOB. Similar vehicles were later also supplied under licence to other railways, such as the FO, MOB and SBB Brünig. For the model, special attention was paid to the detailed representation of the frame construction, in particular the braking equipment and the operation of the loading flaps. The ballast container is fitted with a removable load insert, which can be realistically loaded with model ballast.

Regular price: CHF 225.00

Pre-order, release expected in Q4 2026

RhB Fb 8504 high-sided open wagon, steel walls, brown, 0m
BEMO 9455114 Scale 0m
RhB Fb 8504 high-sided open wagon, steel walls, brown, 0m

Between 1911 and 1913, the RhB acquired the high-sided open wagons L3 6601-6670 for the transport of goods not sensitive to the weather. The wood-panelled wagons had a wheelbase of 4.7 m and an overall length of 8.89 m. In the early 1970s, nine of these wagons were converted into the flat wagons K-w 7501-7509. From 1977, almost two dozen examples of the high-sided open wagons, by then designated E 6601-6670, were fitted with new steel bodies and designated Fb 8501-8523. Others later served as the basis for privately owned wagons or service vehicles. The latter are today the last representatives of this wagon type. Various special wagons have long since replaced them. With the Fb 8504, we offer a high-sided open wagon with steel walls in a red-brown livery. Model version Model to 1:45 scale (0m fine scale) and gauge of 22.2 mm applied strips on the wagon body for a realistic rendering of the double-T beam profile movable side doors with locking wagon floor with chequer plate applied brake rigging with brake shoes at wheelset level applied brake lines metal wheels with inside profiling printed wheelset markings factory-fitted with Kadee couplings

Regular price: CHF 210.00

On order, shipped within 10-21 days

RhB Kk-w 7371 low-sided open wagon with concrete sleepers, 0m
BEMO 9463101 Scale 0m
RhB Kk-w 7371 low-sided open wagon with concrete sleepers, 0m

In 1911 and 1913, the RhB put into service, as part of the second major wagon procurement period, among others the low-sided open wagons M1 7301-7385, now with a wheelbase of 3.5 m instead of 3.15 m compared with the older vehicles. From the 1960s, some of these vehicles began to be converted into flat wagons fitted with gravel containers, solid wooden stanchions for timber transport, or even for rail transport. Most of the remaining vehicles were modernised from the mid-1970s and fitted with aluminium drop sides. Several of the latter were also temporarily fitted again with stanchions in the second half of the 1980s, with the drop sides removed. The most frequent loads include building materials or vehicles, but also concrete sleepers for smaller construction sites. Model version Model to 1:45 scale (0m fine scale) and gauge of 22.2 mm plug-in drop sides with locking movable side drop sides movable stanchions removable platform railings with a storage compartment in the underframe applied brake rigging with brake shoes at wheelset level applied brake lines metal wheels with inside profiling printed wheelset markings factory-fitted with Kadee couplings

Regular price: CHF 195.00

On order, shipped within 10-21 days

RhB Kk-w 7314 low-sided wagon with concrete sleeper load
BEMO 9463104 Scale 0m
RhB Kk-w 7314 low-sided wagon with concrete sleeper load

In 1911 and 1913, as part of the second major wagon procurement period, the RhB built, among other things, the low-sided wagons M1 7301-7385, now with a wheelbase of 3.5 m instead of 3.15 m compared with the older vehicles. From the 1960s, some vehicles began to be converted into flat wagons with gravel containers, heavy timber transport stanchions, or even for rail transport. Most of the remaining vehicles were modernised from the mid-1970s and fitted with aluminium loading side panels. Several of the latter wagons were also temporarily fitted with stanchions again in the second half of the 1980s, with the side panels removed. The most common loads include building materials or vehicles, but also concrete sleepers for smaller construction sites. Model version Model in 1:45 scale (0m fine scale) and 22.2 mm gauge plug-in loading side panels with locking movable side panels movable stanchions removable platform railings with a storage compartment in the underframe applied brake rigging with brake shoes at wheelset level applied brake lines metal wheels with inside profiling printed wheelset markings fitted at the factory with Kadee couplings

Regular price: CHF 195.00

On order, shipped within 10-21 days

RhB Lb-v 7861 container wagon with Coop container "Lieschen"
BEMO 9469111 Scale 0m
RhB Lb-v 7861 container wagon with Coop container "Lieschen"

With the new announcement of the container wagons in 0m scale, we are responding to the wishes of many model railway enthusiasts and expanding our range with these attractive goods wagons. The eye-catching Coop refrigerated containers, with their distinctive design symbolising sustainability and regional connection, stand out in particular. This model adds an attractive and prototypically accurate novelty to your collection. We are modifying the tooling for the refrigerated container wagons with cooling unit, so that further prototype vehicles can be produced true to the original. The new edition includes containers from RhB, Coop and Volg. The two-axle container wagon Lb-v is also being revised accordingly, and the current version as the Lb is being realised with various adaptations to the wagon ends.

Regular price: CHF 240.00

On order, lead time to be confirmed

RhB Lb-v 7879 container wagon with Coop container "Paprika"
BEMO 9469119 Scale 0m
RhB Lb-v 7879 container wagon with Coop container "Paprika"

With the new announcement of the container wagons in 0m scale, we are responding to the wishes of many model railway enthusiasts and expanding our range with these attractive goods wagons. The eye-catching Coop refrigerated containers, with their distinctive design symbolising sustainability and regional connection, stand out in particular. This model adds an attractive and prototypically accurate novelty to your collection. We are modifying the tooling for the refrigerated container wagons with cooling unit, so that further prototype vehicles can be produced true to the original. The new edition includes containers from RhB, Coop and Volg. The two-axle container wagon Lb-v is also being revised accordingly, and the current version as the Lb is being realised with various adaptations to the wagon ends.

Regular price: CHF 240.00

On order, lead time to be confirmed

RhB Lb-v 7881 container wagon with container Y 11532
BEMO 9469121 Scale 0m
RhB Lb-v 7881 container wagon with container Y 11532

With the new announcement of the container wagons in 0m scale, we are responding to the wishes of many model railway enthusiasts and expanding our range with these attractive goods wagons. The eye-catching Coop refrigerated containers, with their distinctive design symbolising sustainability and regional connection, stand out in particular. This model adds an attractive and prototypically accurate novelty to your collection. We are modifying the tooling for the refrigerated container wagons with cooling unit, so that further prototype vehicles can be produced true to the original. The new edition includes containers from RhB, Coop and Volg. The two-axle container wagon Lb-v is also being revised accordingly, and the current version as the Lb is being realised with various adaptations to the wagon ends.

Regular price: CHF 230.00

On order, lead time to be confirmed

RhB Lb 7859 container wagon Volg "Lavin"
BEMO 9469169 Scale 0m
RhB Lb 7859 container wagon Volg "Lavin"

With the new announcement of container wagons in 0m scale, we are responding to the wishes of many model railway enthusiasts and expanding our range with these attractive goods wagons. Particularly striking are the eye-catching Coop refrigerated containers with their distinctive design, symbolising sustainability and regional connection. This model adds an attractive and prototypically accurate novelty to your collection. We are modifying the tooling of the refrigerated container wagons with cooling unit, so that further prototype vehicles can be produced true to the original. The new edition includes containers from RhB, Coop and Volg. The two-axle flat wagon Lb-v is likewise adapted and reworked, and the current version as Lb is realised with various modifications to the wagon ends.

Regular price: CHF 240.00

On order, lead time to be confirmed