Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight wagons

Filter products
H0 Container Car Lbs577 DB, with Ddikr621 "Von Haus zu Haus"
Brawa 50607 Scale H0
H0 Container Car Lbs577 DB, with Ddikr621 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car Lbs577 DB, with Ddikr621 "Dinkelacker"
Brawa 50608 Scale H0
H0 Container Car Lbs577 DB, with Ddikr621 "Dinkelacker"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Lidded Freight Car K 25 DB
Brawa 50640 Scale H0
H0 Lidded Freight Car K 25 DB

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car Fk SNCF
Brawa 50643 Scale H0
H0 Lidded Freight Car Fk SNCF

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car STw SNCF
Brawa 50644 Scale H0
H0 Lidded Freight Car STw SNCF

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Grs DRG
Brawa 50647 Scale H0
H0 Covered Freight Car Grs DRG

Prototype The introduction of welding technology from 1933 onwards increasingly made the Deutsche Reichsbahn (DR) switch to joining the components of their wagons by welding instead of riveting. One of the main advantages of welding technology was the weight saving which could then be used for increasing the cargo weight. In order to respond to the demand for higher speeds in part-load traffic as well, the DR developed the "Gs Oppeln", starting in 1936. Due to its wheel base of 6000mm, its maximum permissible speed could be fixed at 90 km/h. In addition to the missing junction plates that were made superfluous by the welding technology, this wagon type mainly differed in the pointed truss frame required due to the long wheel base. The increasing need for goods wagons due to the war led to the mass production of the "Gs Oppeln" from 1938 onwards. As a result, about 28,000 wagons without and 6,100 wagons with handbrake were built in the following years. Many of the wagons were equipped with a steam heating or even an electric heating system and could therefore be used as part-load wagons in semi-fast and express trains without any problems. After the end of World War II, the wagons were distributed all over Europe and could be found, for example, in the service of the railway administrations of Austria, Czechoslovakia, Poland, or Belgium. The reorganisation of the vehicle numbers of the young Deutsche Bundesbahn in the early fifties of the last century led to the change of "Gs Oppeln" into "Gms 30". Some of the wagons even came into the EUROP wagon pool, thus serving on an international basis. With the emergence of the first newly built goods wagons at the end of the fifties, a decision was made against an expensive general overhaul of the wagons. When the UIC numbering system was introduced, the existing wagons were re-numbered into "Glms 200", and some of them survived until 1979. Model Metal axle bearing Bogie with three-point support True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails Individually mounted steps Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car SSlm (Ce 168) K.P.E.V.
Brawa 50648 Scale H0
H0 Heavy Duty Freight Car SSlm (Ce 168) K.P.E.V.

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car SSlm DB
Brawa 50650 Scale H0
H0 Heavy Duty Freight Car SSlm DB

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car SSlm DB
Brawa 50651 Scale H0
H0 Heavy Duty Freight Car SSlm DB

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car Rp668 DB
Brawa 50652 Scale H0
H0 Heavy Duty Freight Car Rp668 DB

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car SSlu DR
Brawa 50653 Scale H0
H0 Heavy Duty Freight Car SSlu DR

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car Rkmo DR
Brawa 50654 Scale H0
H0 Heavy Duty Freight Car Rkmo DR

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car RRlymf CFL
Brawa 50655 Scale H0
H0 Heavy Duty Freight Car RRlymf CFL

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car SSlm ÖBB
Brawa 50656 Scale H0
H0 Heavy Duty Freight Car SSlm ÖBB

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car Rlyf Nord
Brawa 50657 Scale H0
H0 Heavy Duty Freight Car Rlyf Nord

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Heavy Duty Freight Car RRlymf SNCF
Brawa 50658 Scale H0
H0 Heavy Duty Freight Car RRlymf SNCF

Prototype The railway has always been a means of transporting large and heavy loads. It was therefore a logical step for the K.E.P.V., after various predecessor designs, to devote itself to the development of rail carriages with larger payloads from around 1910. In accordance with the needs of the time, a rail carriage type was developed that was designed for a loading length of 18 m and a maximum load capacity of 35 t. In various construction lots between 1912 and 1928, the K.P.E.V. – and later the DRG – ordered a total of around 2,650 SSlm (Ce 168) rail carriages based on the Ce 168 master drawing. The filigree strut bracing and carriage floor made of perforated sheet metal were distinctive features of the rail carriages of this era. While most of these carriages were only equipped with handbrakes upon delivery, the units delivered to the DRB were factory fitted with Kunze-Knorr goods-train air brakes. These brakes were retrofitted to many carriages of older manufacture over the years. The vehicle fleet has fluctuated over the years. After the First World War, the total stock was decimated as a result of reparations to France and Belgium, as well as Poland. In the early 1950s, both German state railways still had a combined inventory of approximately 1,000 SSlm 16 / SSlu vehicles. Due to further decommissioning, the number of serviceable carriages fell steadily until the last wagons of this type were withdrawn from service in the 1970s. Model Brake blocks in wheel plane NEM-standard short-coupling Die-cast zinc floor Insertable stakes, individually enclosed Delivery without load Extra mounted steps and handrails Metal wheels Finely detailed chassis Extra mounted axle brake rod Individually mounted toe bearing

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Flat Car Sggrrs ÖBB
Brawa 50665 Scale H0
H0 Flat Car Sggrrs ÖBB

Prototype Innofreight, as the name suggests, is fully committed to innovation in rail freight transport. The company claims that its self-developed InnoWaggons allow freight transport on the railways to be organised more efficiently than ever before. Innofreight achieves this efficiency by offering its InnoWaggons in three different lengths: 2x30 ft, 2x40 ft and 2x45 ft. Each vehicle consists of two short-coupled carrying wagons. The InnoWaggons can be fitted with a variety of different superstructures and transport racks by means of standardised folding container spigots. The wagons can thus be individually equipped and loaded for each customer and, if required, even for each transport assignment. This is certainly a very far-sighted innovation, especially given the increasingly complex approval procedures for rail vehicles. Model Replica of all three InnoWaggons double carriages Replica of the latest generation Y25 bogie Extra mounted brake-switch Fine engravings NEM-standard short-coupling True-to-original replica of the car bottom Wheelsets with inside contours Bogie with three-point support Without loading, for free arrangement

Regular price: CHF 112.70

On order, shipped within 10-15 days

H0 Flat Car Sggrrs VTG
Brawa 50666 Scale H0
H0 Flat Car Sggrrs VTG

Prototype Innofreight, as the name suggests, is fully committed to innovation in rail freight transport. The company claims that its self-developed InnoWaggons allow freight transport on the railways to be organised more efficiently than ever before. Innofreight achieves this efficiency by offering its InnoWaggons in three different lengths: 2x30 ft, 2x40 ft and 2x45 ft. Each vehicle consists of two short-coupled carrying wagons. The InnoWaggons can be fitted with a variety of different superstructures and transport racks by means of standardised folding container spigots. The wagons can thus be individually equipped and loaded for each customer and, if required, even for each transport assignment. This is certainly a very far-sighted innovation, especially given the increasingly complex approval procedures for rail vehicles. Model Replica of all three InnoWaggons double carriages Replica of the latest generation Y25 bogie Extra mounted brake-switch Fine engravings NEM-standard short-coupling True-to-original replica of the car bottom Wheelsets with inside contours Bogie with three-point support Without loading, for free arrangement

Regular price: CHF 112.70

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs DRG
Brawa 50719 Scale H0
H0 Covered Freight Car Gmhs DRG

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs35 DB
Brawa 50720 Scale H0
H0 Covered Freight Car Gmhs35 DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Glm201 DB
Brawa 50722 Scale H0
H0 Covered Freight Car Glm201 DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Gms DR
Brawa 50724 Scale H0
H0 Covered Freight Car Gms DR

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs DR
Brawa 50726 Scale H0
H0 Covered Freight Car Gmhs DR

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Gmds ÖBB
Brawa 50727 Scale H0
H0 Covered Freight Car Gmds ÖBB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days