Locomotives
Prototype The Cologne Reichsbahn directorate did not receive the 01 192 – 198 locomotives for operations along the Rhine until 1936/1937, which was very late indeed. 01 193 was phased out on 21.12.1936 and assigned to the Deutzerfeld railway depot. The area of responsibility for the locomotive included the route of the legendary “Rheingold-Express”, assumed from the BR 18.5. As early as 1930, the Offenburg railway depot operated it with an 01 vehicle along the Upper Rhine to Basel. The 01 193 also survived the war in Cologne and moved to Hamm in 1948. Here, it operated on the East-West axis between Aachen and Hanover with numerous sister locomotives until 1959 and was then transferred to Paderborn. A new high-performance boiler was installed in Nied in 1960. In 1964, it was passed on to Rheine after only five years. As was the case with trains starting in Paderborn, it turned in Kassel and travelled north to Bremen, Emden and Oldenburg. The “Rheiner 01” vehicles were often installed with a 2´2T30 Tender for utilisation in The Netherlands. The increasing allocation of the 01.10 meant that the 01 became expendable, the 001 193-2 was decommissioned as early as 21.06.1968. Gustav Ahrens GmbH dismantled it in Essen-Rellinghausen in September and October 1969. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Smoke generator and sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Fine paintwork and painting Lines and extra mounted parts in minimum material thickness Extra mounted steps 1000 mm leading wheels Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
In stock: 1 on the shelf, shipped within 1-3 days
LED lighting Extra mounted windscreen wiper New true to original gearbox Improved power consumption Etched front steps New with NEM-standard short-coupling Buffer screed & roof in more detail Driver's cab light New motor PluX22 interface D&H sound
In stock: 1 on the shelf, shipped within 1-3 days
Available for direct and alternating current Etched radiator grille Free-standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Reproduction of the brake linkage Metal frame and wheels, structure made of plastic NEM-standard short coupling Light change Equipment Digital Version EXTRA (DC + AC) Filigree electronic coupling (interchangeable thanks to NEM standard) Incl. energy storage (buffers sound, motor and light) Comprehensive light functions, flicker-free light provided by a separate capacitor Range-specific original sound with the latest sound technology Optimal motor and load control for perfect running characteristics Compatible with all common digital systems Driver cabin light
In stock: 1 on the shelf, shipped within 1-3 days
Prototype New, stricter safety specifications forced Bombardier to increase the crash safety of the TRAXX 1 locomotive body. As a result, the TRAXX 2 locomotives that have been manufactured since 2005 boast a ver tical front section at the bottom as well as altered shunting treads on the fronts. Many components inside the vehicle were also simplified and standardised in order to be able to respond to customer desires in a more flexible manner whilst also reducing in-house production work. For instance, the time for the final assembly of a TRAXX locomotive has been reduced to a maximum of two weeks. In order to also be able to distinguish them in terms of their fleet number, the locomotives have been issued with the subclass numbers 185.2 and 146.2 to 146.5 at Deutsche Bahn AG. In the meantime, Bombardier has globally produced over 1500 units of this highly successful TRAXX family. Model Attached grip rails (head end) Illuminated train destination display Top-quality printing and painting Driver's cab lighting Prepared for sound, or with sound installed Etched treadplates Incl. snowplough LED lighting Windscreen wipers attached individually Different design of the train compartments PluX22 interface Driver's cab lighting switchable like the original Long-distance headlights raise like the original Smooth, steady setting off even at speed level 1 Setting off and braking delay like the original Optimal power consumption Chassis with free view and details true to the original Simple, cable-free dismantling of the housing possible as well as non-twist locking lugs Roof sections true to the different versions with 2 or 4 pantographs True-to-original rest position of the pantographs Metal frame
In stock: 1 on the shelf, shipped within 1-3 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.
On order, shipped within 10-15 days
Prototype Originally, the series designation was intended to be 33, however the G10 finally received the designation BR 57.10-35. In total, there were 2,358 engines with this designation. Just like in Prussian times, these engines were used especially on routes with a weaker superstructure but heavy goods traffic. Included here were Rbd (imperial railway directorate) Essen, Wuppertal, Breslau, Erfurt, Hannover and Kassel. The G10 also quickly became established in the Bavarian directorates, with Augsburg, München, Nuremberg, Regensburg, Würzburg and Ludwigshafen together accounting for 156 G 10s by 1924. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Originally, the series designation was intended to be 33, however the G10 finally received the designation BR 57.10-35. In total, there were 2,358 engines with this designation. Just like in Prussian times, these engines were used especially on routes with a weaker superstructure but heavy goods traffic. Included here were Rbd (imperial railway directorate) Essen, Wuppertal, Breslau, Erfurt, Hannover and Kassel. The G10 also quickly became established in the Bavarian directorates, with Augsburg, München, Nuremberg, Regensburg, Würzburg and Ludwigshafen together accounting for 156 G 10s by 1924. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Originally, the series designation was intended to be 33, however the G10 finally received the designation BR 57.10-35. In total, there were 2,358 engines with this designation. Just like in Prussian times, these engines were used especially on routes with a weaker superstructure but heavy goods traffic. Included here were Rbd (imperial railway directorate) Essen, Wuppertal, Breslau, Erfurt, Hannover and Kassel. The G10 also quickly became established in the Bavarian directorates, with Augsburg, München, Nuremberg, Regensburg, Würzburg and Ludwigshafen together accounting for 156 G 10s by 1924. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype After the end of the war, a large number of G 10s were lost. In 1952 there was a remainder of 485 locomotives in the fleet. As in the time of the DRG, the largest stocks were in Essen and Wuppertal. Apart from its deployment on routes with a light superstructure, the BR 57 was often used as a shunting locomotive. For this purpose, several locomotives were equipped with shunting radio. They were used for shunting especially on the extensive tracks of the shunting stations in Basle (Haltingen depot) and the Hagen depot. The depot in Cochem used class 57 locomotives to shunt a large number of trains on the Mosel route. In the early 1950s, these services were also available in Hausach on the Schwarzwaldbahn (Black Forest railway). In many conurbations in the 1950s, the G 10 pulled the local goods trains, while the BR 50 was used for more difficult jobs. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype After the end of the war, a large number of G 10s were lost. In 1952 there was a remainder of 485 locomotives in the fleet. As in the time of the DRG, the largest stocks were in Essen and Wuppertal. Apart from its deployment on routes with a light superstructure, the BR 57 was often used as a shunting locomotive. For this purpose, several locomotives were equipped with shunting radio. They were used for shunting especially on the extensive tracks of the shunting stations in Basle (Haltingen depot) and the Hagen depot. The depot in Cochem used class 57 locomotives to shunt a large number of trains on the Mosel route. In the early 1950s, these services were also available in Hausach on the Schwarzwaldbahn (Black Forest railway). In many conurbations in the 1950s, the G 10 pulled the local goods trains, while the BR 50 was used for more difficult jobs. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype After the end of the war, a large number of G 10s were lost. In 1952 there was a remainder of 485 locomotives in the fleet. As in the time of the DRG, the largest stocks were in Essen and Wuppertal. Apart from its deployment on routes with a light superstructure, the BR 57 was often used as a shunting locomotive. For this purpose, several locomotives were equipped with shunting radio. They were used for shunting especially on the extensive tracks of the shunting stations in Basle (Haltingen depot) and the Hagen depot. The depot in Cochem used class 57 locomotives to shunt a large number of trains on the Mosel route. In the early 1950s, these services were also available in Hausach on the Schwarzwaldbahn (Black Forest railway). In many conurbations in the 1950s, the G 10 pulled the local goods trains, while the BR 50 was used for more difficult jobs. Model Navigable minimum radius: The models of Steam Locomotive BR 57.10 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype The Cologne Reichsbahn directorate did not receive the 01 192 – 198 locomotives for operations along the Rhine until 1936/1937, which was very late indeed. 01 193 was phased out on 21.12.1936 and assigned to the Deutzerfeld railway depot. The area of responsibility for the locomotive included the route of the legendary “Rheingold-Express”, assumed from the BR 18.5. As early as 1930, the Offenburg railway depot operated it with an 01 vehicle along the Upper Rhine to Basel. The 01 193 also survived the war in Cologne and moved to Hamm in 1948. Here, it operated on the East-West axis between Aachen and Hanover with numerous sister locomotives until 1959 and was then transferred to Paderborn. A new high-performance boiler was installed in Nied in 1960. In 1964, it was passed on to Rheine after only five years. As was the case with trains starting in Paderborn, it turned in Kassel and travelled north to Bremen, Emden and Oldenburg. The “Rheiner 01” vehicles were often installed with a 2´2T30 Tender for utilisation in The Netherlands. The increasing allocation of the 01.10 meant that the 01 became expendable, the 001 193-2 was decommissioned as early as 21.06.1968. Gustav Ahrens GmbH dismantled it in Essen-Rellinghausen in September and October 1969. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype The Cologne Reichsbahn directorate did not receive the 01 192 – 198 locomotives for operations along the Rhine until 1936/1937, which was very late indeed. 01 193 was phased out on 21.12.1936 and assigned to the Deutzerfeld railway depot. The area of responsibility for the locomotive included the route of the legendary “Rheingold-Express”, assumed from the BR 18.5. As early as 1930, the Offenburg railway depot operated it with an 01 vehicle along the Upper Rhine to Basel. The 01 193 also survived the war in Cologne and moved to Hamm in 1948. Here, it operated on the East-West axis between Aachen and Hanover with numerous sister locomotives until 1959 and was then transferred to Paderborn. A new high-performance boiler was installed in Nied in 1960. In 1964, it was passed on to Rheine after only five years. As was the case with trains starting in Paderborn, it turned in Kassel and travelled north to Bremen, Emden and Oldenburg. The “Rheiner 01” vehicles were often installed with a 2´2T30 Tender for utilisation in The Netherlands. The increasing allocation of the 01.10 meant that the 01 became expendable, the 001 193-2 was decommissioned as early as 21.06.1968. Gustav Ahrens GmbH dismantled it in Essen-Rellinghausen in September and October 1969. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype The Cologne Reichsbahn directorate did not receive the 01 192 – 198 locomotives for operations along the Rhine until 1936/1937, which was very late indeed. 01 193 was phased out on 21.12.1936 and assigned to the Deutzerfeld railway depot. The area of responsibility for the locomotive included the route of the legendary “Rheingold-Express”, assumed from the BR 18.5. As early as 1930, the Offenburg railway depot operated it with an 01 vehicle along the Upper Rhine to Basel. The 01 193 also survived the war in Cologne and moved to Hamm in 1948. Here, it operated on the East-West axis between Aachen and Hanover with numerous sister locomotives until 1959 and was then transferred to Paderborn. A new high-performance boiler was installed in Nied in 1960. In 1964, it was passed on to Rheine after only five years. As was the case with trains starting in Paderborn, it turned in Kassel and travelled north to Bremen, Emden and Oldenburg. The “Rheiner 01” vehicles were often installed with a 2´2T30 Tender for utilisation in The Netherlands. The increasing allocation of the 01.10 meant that the 01 became expendable, the 001 193-2 was decommissioned as early as 21.06.1968. Gustav Ahrens GmbH dismantled it in Essen-Rellinghausen in September and October 1969. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Before the class BR 01 gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of 10 pre-series locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first model was the 01 008, which is still preserved today and was handed over to the DRG on 10 January 1926. However, these locomotives were ahead of their time, as many lines and railway depots were not yet prepared for an axle load of 20 t. As a result, the operating distances remained severely limited in the first few years of use. This in turn made the testing phase for the new locomotives an extremely drawn-out process. The most striking difference to the later series locomotives was the visibly longer cab, which remained a feature of the first ten 01’s. There were also differences in the design of the frame and many other details. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Before the class BR 01 gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of 10 pre-series locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first model was the 01 008, which is still preserved today and was handed over to the DRG on 10 January 1926. However, these locomotives were ahead of their time, as many lines and railway depots were not yet prepared for an axle load of 20 t. As a result, the operating distances remained severely limited in the first few years of use. This in turn made the testing phase for the new locomotives an extremely drawn-out process. The most striking difference to the later series locomotives was the visibly longer cab, which remained a feature of the first ten 01’s. There were also differences in the design of the frame and many other details. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Before the class BR 01 gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of 10 pre-series locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first model was the 01 008, which is still preserved today and was handed over to the DRG on 10 January 1926. However, these locomotives were ahead of their time, as many lines and railway depots were not yet prepared for an axle load of 20 t. As a result, the operating distances remained severely limited in the first few years of use. This in turn made the testing phase for the new locomotives an extremely drawn-out process. The most striking difference to the later series locomotives was the visibly longer cab, which remained a feature of the first ten 01’s. There were also differences in the design of the frame and many other details. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Before the class BR 01 gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of 10 pre-series locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first model was the 01 008, which is still preserved today and was handed over to the DRG on 10 January 1926. However, these locomotives were ahead of their time, as many lines and railway depots were not yet prepared for an axle load of 20 t. As a result, the operating distances remained severely limited in the first few years of use. This in turn made the testing phase for the new locomotives an extremely drawn-out process. The most striking difference to the later series locomotives was the visibly longer cab, which remained a feature of the first ten 01’s. There were also differences in the design of the frame and many other details. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days
Prototype Before the class BR 01 gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of 10 pre-series locomotives to the Deutsche Reichsbahn Gesellschaft (DRG). The first model was the 01 008, which is still preserved today and was handed over to the DRG on 10 January 1926. However, these locomotives were ahead of their time, as many lines and railway depots were not yet prepared for an axle load of 20 t. As a result, the operating distances remained severely limited in the first few years of use. This in turn made the testing phase for the new locomotives an extremely drawn-out process. The most striking difference to the later series locomotives was the visibly longer cab, which remained a feature of the first ten 01’s. There were also differences in the design of the frame and many other details. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Extra mounted steps Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.
On order, shipped within 10-15 days