Passenger coaches
Prototype Despite heavy losses, DB still retained a considerable inventory of standard secondary line coaches as well as trailer cars that were derived from them. As was the case before the war, the majority of these vehicles were used between Freiburg, Neustadt and Seebrugg. Otherwise, passenger coaches were usually operated as individual units in the other directorates. In addition to travelling behind combustion-driven railcars, the trailer cars were also often operated in tandem with electric railcars; in order to do so, DB converted the majority into control cars. However, some vehicles remained that could only be used as trailer cars as well as some control cars for combustion-driven railcars. The Nuremberg federal railway directorate continued to remain a paradise for these trailer cars and control cars in the 1950s. On numerous main and secondary railways, the combustion-driven railcar vehicles in the pre-war design complete with combustion-driven railcar trailer cars and combustion-driven railcar control cars ensured inexpensive operation before they were replaced by the saviour of secondary railways – the railbus. Model Wheel sets in toe bearing Brake shoes in wheel plane Individually mounted axle box cover Extra mounted steps True-to-epoch different spring buffers Extra mounted brake system and Wendler-Ventilators Separately mounted axle brake rod Fine paintwork and painting Fine engravings and rivets Separately mounted lines, handrails and signal holder Originally reproduced, three-dimensional frame body True-to-original interior fittings
On order, shipped within 10-15 days
Prototype Despite heavy losses, DB still retained a considerable inventory of standard secondary line coaches as well as trailer cars that were derived from them. As was the case before the war, the majority of these vehicles were used between Freiburg, Neustadt and Seebrugg. Otherwise, passenger coaches were usually operated as individual units in the other directorates. In addition to travelling behind combustion-driven railcars, the trailer cars were also often operated in tandem with electric railcars; in order to do so, DB converted the majority into control cars. However, some vehicles remained that could only be used as trailer cars as well as some control cars for combustion-driven railcars. The Nuremberg federal railway directorate continued to remain a paradise for these trailer cars and control cars in the 1950s. On numerous main and secondary railways, the combustion-driven railcar vehicles in the pre-war design complete with combustion-driven railcar trailer cars and combustion-driven railcar control cars ensured inexpensive operation before they were replaced by the saviour of secondary railways – the railbus. Model Wheel sets in toe bearing Brake shoes in wheel plane Individually mounted axle box cover Extra mounted steps True-to-epoch different spring buffers Extra mounted brake system and Wendler-Ventilators Separately mounted axle brake rod Fine paintwork and painting Fine engravings and rivets Separately mounted lines, handrails and signal holder Originally reproduced, three-dimensional frame body True-to-original interior fittings
On order, shipped within 10-15 days
Prototype Despite heavy losses, DB still retained a considerable inventory of standard secondary line coaches as well as trailer cars that were derived from them. As was the case before the war, the majority of these vehicles were used between Freiburg, Neustadt and Seebrugg. Otherwise, passenger coaches were usually operated as individual units in the other directorates. In addition to travelling behind combustion-driven railcars, the trailer cars were also often operated in tandem with electric railcars; in order to do so, DB converted the majority into control cars. However, some vehicles remained that could only be used as trailer cars as well as some control cars for combustion-driven railcars. The Nuremberg federal railway directorate continued to remain a paradise for these trailer cars and control cars in the 1950s. On numerous main and secondary railways, the combustion-driven railcar vehicles in the pre-war design complete with combustion-driven railcar trailer cars and combustion-driven railcar control cars ensured inexpensive operation before they were replaced by the saviour of secondary railways – the railbus. Model Wheel sets in toe bearing Brake shoes in wheel plane Individually mounted axle box cover Extra mounted steps True-to-epoch different spring buffers Extra mounted brake system and Wendler-Ventilators Separately mounted axle brake rod Fine paintwork and painting Fine engravings and rivets Separately mounted lines, handrails and signal holder Originally reproduced, three-dimensional frame body True-to-original interior fittings
On order, shipped within 10-15 days
Prototype Despite heavy losses, DB still retained a considerable inventory of standard secondary line coaches as well as trailer cars that were derived from them. As was the case before the war, the majority of these vehicles were used between Freiburg, Neustadt and Seebrugg. Otherwise, passenger coaches were usually operated as individual units in the other directorates. In addition to travelling behind combustion-driven railcars, the trailer cars were also often operated in tandem with electric railcars; in order to do so, DB converted the majority into control cars. However, some vehicles remained that could only be used as trailer cars as well as some control cars for combustion-driven railcars. The Nuremberg federal railway directorate continued to remain a paradise for these trailer cars and control cars in the 1950s. On numerous main and secondary railways, the combustion-driven railcar vehicles in the pre-war design complete with combustion-driven railcar trailer cars and combustion-driven railcar control cars ensured inexpensive operation before they were replaced by the saviour of secondary railways – the railbus. Model Wheel sets in toe bearing Brake shoes in wheel plane Individually mounted axle box cover Extra mounted steps True-to-epoch different spring buffers Extra mounted brake system and Wendler-Ventilators Separately mounted axle brake rod Fine paintwork and painting Fine engravings and rivets Separately mounted lines, handrails and signal holder Originally reproduced, three-dimensional frame body True-to-original interior fittings
On order, shipped within 10-15 days
Prototype In 1883, the Württembergische Staatsbahn received a delivery of 10 passenger coaches from the Maschinenfabrik Esslingen 10, which had a strong Prussian appearance with their skylight roof. Originally they had 6 seats in 1st class and 28 seats in 2nd class as well as a toilet. With the ever expanding rail network in Germany, it became necessary to offer night trains as well in the future. For this purpose, sleeperettes were fitted out, which could clearly be distinguished from passenger coaches from a distance due to their livery. Model Extra mounted steps and handrails in low-material thickness Very finely pierced roof pillar Multi part brake system with brake shoes in wheel plane
On order, shipped within 10-15 days
Prototype In 1883, the Württembergische Staatsbahn received a delivery of 10 passenger coaches from the Maschinenfabrik Esslingen 10, which had a strong Prussian appearance with their skylight roof. Originally they had 6 seats in 1st class and 28 seats in 2nd class as well as a toilet. With the ever expanding rail network in Germany, it became necessary to offer night trains as well in the future. For this purpose, sleeperettes were fitted out, which could clearly be distinguished from passenger coaches from a distance due to their livery. Model Extra mounted steps and handrails in low-material thickness Very finely pierced roof pillar Multi part brake system with brake shoes in wheel plane
On order, shipped within 10-15 days
Prototype In 1883, the Württembergische Staatsbahn received a delivery of 10 passenger coaches from the Maschinenfabrik Esslingen 10, which had a strong Prussian appearance with their skylight roof. Originally they had 6 seats in 1st class and 28 seats in 2nd class as well as a toilet. With the ever expanding rail network in Germany, it became necessary to offer night trains as well in the future. For this purpose, sleeperettes were fitted out, which could clearly be distinguished from passenger coaches from a distance due to their livery. Model Extra mounted steps and handrails in low-material thickness Very finely pierced roof pillar Multi part brake system with brake shoes in wheel plane
On order, shipped within 10-15 days
Prototype Although the SBB had taken over large numbers of the American four-axle coaches and the coaches had proven their worth in service, when ordering new vehicles it was decided to use a three-axle design. After some time, the long coach body showed a high level of warping and deformation. The reason for this was the very poor running properties of the primitive bogies without secondary suspension. Nevertheless, some remained in service until 1941 and trains formed solely with four-axle coaches of the same class still travelled between Winterthur and Wil in 1930. Model Tip bearing wheelsets Extra wheel bearing and suspension system True-to-scale side frames Extra gas tank Completely lacquered wagon body, housing and roof with soot marks Handles and steps in lower-density material
On order, shipped within 10-15 days
Prototype Although the SBB had taken over large numbers of the American four-axle coaches and the coaches had proven their worth in service, when ordering new vehicles it was decided to use a three-axle design. After some time, the long coach body showed a high level of warping and deformation. The reason for this was the very poor running properties of the primitive bogies without secondary suspension. Nevertheless, some remained in service until 1941 and trains formed solely with four-axle coaches of the same class still travelled between Winterthur and Wil in 1930. Model Tip bearing wheelsets Extra wheel bearing and suspension system True-to-scale side frames Extra gas tank Completely lacquered wagon body, housing and roof with soot marks Handles and steps in lower-density material
On order, shipped within 10-15 days
Prototype Although the SBB had taken over large numbers of the American four-axle coaches and the coaches had proven their worth in service, when ordering new vehicles it was decided to use a three-axle design. After some time, the long coach body showed a high level of warping and deformation. The reason for this was the very poor running properties of the primitive bogies without secondary suspension. Nevertheless, some remained in service until 1941 and trains formed solely with four-axle coaches of the same class still travelled between Winterthur and Wil in 1930. Model Tip bearing wheelsets Extra wheel bearing and suspension system True-to-scale side frames Extra gas tank Completely lacquered wagon body, housing and roof with soot marks Handles and steps in lower-density material
On order, shipped within 10-15 days
Prototype Although the SBB had taken over large numbers of the American four-axle coaches and the coaches had proven their worth in service, when ordering new vehicles it was decided to use a three-axle design. After some time, the long coach body showed a high level of warping and deformation. The reason for this was the very poor running properties of the primitive bogies without secondary suspension. Nevertheless, some remained in service until 1941 and trains formed solely with four-axle coaches of the same class still travelled between Winterthur and Wil in 1930. Model Tip bearing wheelsets Extra wheel bearing and suspension system True-to-scale side frames Extra gas tank Completely lacquered wagon body, housing and roof with soot marks Handles and steps in lower-density material
On order, shipped within 10-15 days
Prototype Although the SBB had taken over large numbers of the American four-axle coaches and the coaches had proven their worth in service, when ordering new vehicles it was decided to use a three-axle design. After some time, the long coach body showed a high level of warping and deformation. The reason for this was the very poor running properties of the primitive bogies without secondary suspension. Nevertheless, some remained in service until 1941 and trains formed solely with four-axle coaches of the same class still travelled between Winterthur and Wil in 1930. Model Tip bearing wheelsets Extra wheel bearing and suspension system True-to-scale side frames Extra gas tank Completely lacquered wagon body, housing and roof with soot marks Handles and steps in lower-density material
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Prototype A vast number of Cid 21 passenger coaches came to the DB after the second world war. The DB couldn’t do without this relatively new coach and put it into passenger services throughout Germany. When third class coaches were abolished in 1956, the Cid coaches were upgraded to second class and used from that time on with the designation Bid 21. Passengers paid for the comfort of the fourth class coach, which was abolished in 1928, with a new second class ticket. Model Extra mounted steps and handrails in low-material thickness Multi-part brake system with brake shoes in wheel plane Finely detailed strut bracing of impact-resistant plastic
On order, shipped within 10-15 days
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA order no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA item no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA order no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA item no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA item no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA item no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed