Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Railcars and multiple units

Filter products
New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)
Brawa 44270 Scale H0
H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)

Prototype The four-part Talents of the 4024 class are put to use in the S-Bahn in the Austrian capital, Vienna. The trains have a total length of 66.87 m, and the engines have a combined output of 1,520 kW. Electric propulsion was also considered in the construction of the power cars in the Talent family. The österreichische Bundesbahnen ÖBB is the first railroad company to make use of this option. The ÖBB ordered Talents in two versions: the three-part power trains of the 4023 class and the four-part version as the 4024 class. So far a total of 111 engine cars have been ordered. Some of them are also used in routes to neighbouring countries, such as to Germany. Model Destination indicator: Leoben Hbf Pickup shoe changeover in analog and digital operation Extended interface (26-pin for analog pickup shoe changeover), PluX22 interface located in the middle Analog slide switches on the printed circuit board to switch off the lights at the end of the power heads Extra mounted air conditioning installation and high voltage equipment Finely detailed pantograph Fine paintwork and painting Fine engravings In-plane assembled windows Prepared for sound or with builtin sound With interior lighting Interior fittings LED lighting Precise replica of the bogies Windscreen wipers individually mounted Different kind of light (not all functions available in analog mode): Illuminated destination indicator Emergency lighting Interior lighting Drivers cabin lighting Light change white/red and Long-distance headlights

Regular price: CHF 415.05

On order, shipped within 10-15 days

H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)
Brawa 44272 Scale H0
H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)

Prototype The four-part Talents of the 4024 class are put to use in the S-Bahn in the Austrian capital, Vienna. The trains have a total length of 66.87 m, and the engines have a combined output of 1,520 kW. Electric propulsion was also considered in the construction of the power cars in the Talent family. The österreichische Bundesbahnen ÖBB is the first railroad company to make use of this option. The ÖBB ordered Talents in two versions: the three-part power trains of the 4023 class and the four-part version as the 4024 class. So far a total of 111 engine cars have been ordered. Some of them are also used in routes to neighbouring countries, such as to Germany. Model Destination indicator: Leoben Hbf Pickup shoe changeover in analog and digital operation Extended interface (26-pin for analog pickup shoe changeover), PluX22 interface located in the middle Analog slide switches on the printed circuit board to switch off the lights at the end of the power heads Extra mounted air conditioning installation and high voltage equipment Finely detailed pantograph Fine paintwork and painting Fine engravings In-plane assembled windows Prepared for sound or with builtin sound With interior lighting Interior fittings LED lighting Precise replica of the bogies Windscreen wipers individually mounted Different kind of light (not all functions available in analog mode): Illuminated destination indicator Emergency lighting Interior lighting Drivers cabin lighting Light change white/red and Long-distance headlights

Regular price: CHF 505.30

On order, shipped within 10-15 days

H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)
Brawa 44273 Scale H0
H0 Electric Railcar Talent BR 4024 ÖBB, Steiermark (Leoben Hbf)

Prototype The four-part Talents of the 4024 class are put to use in the S-Bahn in the Austrian capital, Vienna. The trains have a total length of 66.87 m, and the engines have a combined output of 1,520 kW. Electric propulsion was also considered in the construction of the power cars in the Talent family. The österreichische Bundesbahnen ÖBB is the first railroad company to make use of this option. The ÖBB ordered Talents in two versions: the three-part power trains of the 4023 class and the four-part version as the 4024 class. So far a total of 111 engine cars have been ordered. Some of them are also used in routes to neighbouring countries, such as to Germany. Model Destination indicator: Leoben Hbf Pickup shoe changeover in analog and digital operation Extended interface (26-pin for analog pickup shoe changeover), PluX22 interface located in the middle Analog slide switches on the printed circuit board to switch off the lights at the end of the power heads Extra mounted air conditioning installation and high voltage equipment Finely detailed pantograph Fine paintwork and painting Fine engravings In-plane assembled windows Prepared for sound or with builtin sound With interior lighting Interior fittings LED lighting Precise replica of the bogies Windscreen wipers individually mounted Different kind of light (not all functions available in analog mode): Illuminated destination indicator Emergency lighting Interior lighting Drivers cabin lighting Light change white/red and Long-distance headlights

Regular price: CHF 505.30

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 758 DRG
Brawa 44436 Scale H0
H0 Diesel Railcar BR VT 758 DRG

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 315.80

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 758 DRG
Brawa 44438 Scale H0
H0 Diesel Railcar BR VT 758 DRG

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 758 DRG
Brawa 44439 Scale H0
H0 Diesel Railcar BR VT 758 DRG

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 66.9 DB
Brawa 44440 Scale H0
H0 Diesel Railcar BR VT 66.9 DB

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 315.80

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 66.9 DB
Brawa 44442 Scale H0
H0 Diesel Railcar BR VT 66.9 DB

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 66.9 DB
Brawa 44443 Scale H0
H0 Diesel Railcar BR VT 66.9 DB

Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 761 DRG
Brawa 44444 Scale H0
H0 Diesel Railcar BR VT 761 DRG

Prototype After they were delivered in 1927, railcars 761 and 762 were painted brown-green with offset black strips and a silver-grey roof in accordance with regulations for carriages. After approval, they were used in Frankfurt an der Oder, Breslau (present-day Wroclaw) Central Station, Allenstein (present-day Olsztyn), Trier, Templin, Oldenburg, and other locations. At that time, the third of the prominent roof ventilators was not yet in place, as it was only retrofitted between 1930 and 1932 in the course of drive and technology improvements. Model Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 315.80

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 761 DRG
Brawa 44446 Scale H0
H0 Diesel Railcar BR VT 761 DRG

Prototype After they were delivered in 1927, railcars 761 and 762 were painted brown-green with offset black strips and a silver-grey roof in accordance with regulations for carriages. After approval, they were used in Frankfurt an der Oder, Breslau (present-day Wroclaw) Central Station, Allenstein (present-day Olsztyn), Trier, Templin, Oldenburg, and other locations. At that time, the third of the prominent roof ventilators was not yet in place, as it was only retrofitted between 1930 and 1932 in the course of drive and technology improvements. Model Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 Diesel Railcar BR VT 761 DRG
Brawa 44447 Scale H0
H0 Diesel Railcar BR VT 761 DRG

Prototype After they were delivered in 1927, railcars 761 and 762 were painted brown-green with offset black strips and a silver-grey roof in accordance with regulations for carriages. After approval, they were used in Frankfurt an der Oder, Breslau (present-day Wroclaw) Central Station, Allenstein (present-day Olsztyn), Trier, Templin, Oldenburg, and other locations. At that time, the third of the prominent roof ventilators was not yet in place, as it was only retrofitted between 1930 and 1932 in the course of drive and technology improvements. Model Extra mounted and free-standing steps and handrails Repared for sound or with built-in sound Metal drive unit Multipart interior fittings In-plane assembled windows Illuminated driver's cab Fine metal spoked wheels Drive in the locomotive to all four axles With interior fittings Fine engravings Close-coupling Finely detailed bogies True-to-epoch lighting

Regular price: CHF 397.00

On order, shipped within 10-15 days

H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)
Brawa 44560 Scale H0
H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)

Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario® double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario® is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model 1 Control Car, 2 Middle Waggons 2nd class Exactly scale 1:87 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting Painting adjusted for BRAWA TRAXX Electric Locomotive BR 146.5 With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 324.80

On order, shipped within 10-15 days

H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)
Brawa 44564 Scale H0
H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)

Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario® double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario® is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model 1 Control Car, 2 Middle Waggons 2nd class Exactly scale 1:87 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting Painting adjusted for BRAWA TRAXX Electric Locomotive BR 146.5 With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 469.20

On order, shipped within 10-15 days

H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)
Brawa 44567 Scale H0
H0 TWINDEXX Vario® IC2-Double-Deck Coaches DB AG, set of 3 (Karlsruhe Hbf)

Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario® double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario® is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model 1 Control Car, 2 Middle Waggons 2nd class Exactly scale 1:87 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting Painting adjusted for BRAWA TRAXX Electric Locomotive BR 146.5 With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 469.20

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)
Brawa 44588 Scale H0
H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Content: 2 railcars 2nd class, 1 middle wagon 2nd class Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 378.95

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)
Brawa 44589 Scale H0
H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)
Brawa 44590 Scale H0
H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Content: 2 railcars 2nd class, 1 middle wagon 2nd class Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 568.50

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)
Brawa 44591 Scale H0
H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 144.30

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)
Brawa 44593 Scale H0
H0 TWINDEXX Vario® Double-Deck Train DB AG, set of 3 (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Content: 2 railcars 2nd class, 1 middle wagon 2nd class Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 568.50

On order, shipped within 10-15 days

H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)
Brawa 44594 Scale H0
H0 TWINDEXX Vario® Double-Deck Middle Wagon 1st/2nd class DB AG (Nürnberg Hbf)

Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exactly scale 1:87 True-to-original length over Scharfenbeck coupling Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Illuminated driver's cab True-to-scale details Extra mounted windscreen wiper Perfectly replicated three-dimensional front Multipart bogies Fine paintwork and painting With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel Metal bearing ZugBus: automatic detection of the first and last model in the train; controlling and programming of all functions; detection of brake sections ZugBUS-Functions are only available in digital mode

Regular price: CHF 144.30

On order, shipped within 10-15 days

H0 Electric Railcar BR 426 BOB (Friedrichshafen Hafen)
Brawa 44640 Scale H0
H0 Electric Railcar BR 426 BOB (Friedrichshafen Hafen)

Prototype For use in regional traffic, DB AG procured numerous new vehicles that were primarily designed as railcars at the end of the 1990s. Consequently, 249 units of a four-part electric railcar which was given the BR 425 designation were also procured from the Siemens/ Adtranz/ Bombardier/ DWA consortium between 1999 and 2008. An identical two-part version for less-frequented routes was also created and given the BR 426 designation. The car bodies are manufactured from aluminum extruded profiles and the windows are bonded flush. The car bodies support each other via Jacobs bogies and the end bogies are respectively driven by two three phase engines. The wagon is fully accessible from the inside and has room for 206 seated and 228 standing passengers. The wagon also boasts 30 folding seats with a further 24 normal seats in the first class cabin. The 425 was and continues to be utilized by DB Regio NRW; Baden-Württemberg; Südwest; Bayern; Südost; Nord; Schleswig-Holstein and Berlin; no private railway companies procured these railcars. Tasks entrusted to this railcar included service in various suburban rail networks such as those in the Ludwigshafen – Mannheim – Heidelberg area of the Rhine-Neckar transport association as well as an RE service on long-distance routes. This includes routes such as Mannheim – Saarbrücken – Trier or Magdeburg – Stendal – Wittenberge – Salzwedel. Model Perfectly replicated three-dimensional front Extra mounted air conditioning installation and high voltage equipment Finely detailed pantograph Fine engravings In-plane assembled windows Functional and illuminated destination indicator LED lighting Precise replica of the bogies, incl. consideration of all frame differences for the Electric Railcars BR 425 and BR 426 Windscreen wipers individually mounted Destination indicator at the font sides behind the pane True-to-original rest position of the pantographs Prepared for sound or with built-in sound With interior lighting Optimal power input NEM-standard short-coupling, for double taction Interior fittings

Regular price: CHF 270.65

On order, shipped within 10-15 days

H0 Electric Railcar BR 426 BOB (Friedrichshafen Hafen)
Brawa 44642 Scale H0
H0 Electric Railcar BR 426 BOB (Friedrichshafen Hafen)

Prototype For use in regional traffic, DB AG procured numerous new vehicles that were primarily designed as railcars at the end of the 1990s. Consequently, 249 units of a four-part electric railcar which was given the BR 425 designation were also procured from the Siemens/ Adtranz/ Bombardier/ DWA consortium between 1999 and 2008. An identical two-part version for less-frequented routes was also created and given the BR 426 designation. The car bodies are manufactured from aluminum extruded profiles and the windows are bonded flush. The car bodies support each other via Jacobs bogies and the end bogies are respectively driven by two three phase engines. The wagon is fully accessible from the inside and has room for 206 seated and 228 standing passengers. The wagon also boasts 30 folding seats with a further 24 normal seats in the first class cabin. The 425 was and continues to be utilized by DB Regio NRW; Baden-Württemberg; Südwest; Bayern; Südost; Nord; Schleswig-Holstein and Berlin; no private railway companies procured these railcars. Tasks entrusted to this railcar included service in various suburban rail networks such as those in the Ludwigshafen – Mannheim – Heidelberg area of the Rhine-Neckar transport association as well as an RE service on long-distance routes. This includes routes such as Mannheim – Saarbrücken – Trier or Magdeburg – Stendal – Wittenberge – Salzwedel. Model Perfectly replicated three-dimensional front Extra mounted air conditioning installation and high voltage equipment Finely detailed pantograph Fine engravings In-plane assembled windows Functional and illuminated destination indicator LED lighting Precise replica of the bogies, incl. consideration of all frame differences for the Electric Railcars BR 425 and BR 426 Windscreen wipers individually mounted Destination indicator at the font sides behind the pane True-to-original rest position of the pantographs Prepared for sound or with built-in sound With interior lighting Optimal power input NEM-standard short-coupling, for double taction Interior fittings

Regular price: CHF 433.10

On order, shipped within 10-15 days