Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

ECoS and Mobile Control

Filter products
ECoSlink Terminal, distribution module for ECoS, CS1, CS2, with cable
ESU
ECoSlink Terminal, distribution module for ECoS, CS1, CS2, with cable

Bus distribution plate with 0.9 m cable, connected to the „Extend“ jack of the ECoS or Central Station: two jacks for hand controllers on the front panel, four sockets at the back for ECoSBoost boosters and ECoSDetector feedback modules.

Regular price: CHF 59.90

In stock: 1 on the shelf, shipped within 1-3 days

L.net converter for ECoS or CS1 Reloaded
ESU 50097
L.net converter for ECoS or CS1 Reloaded

L.Net Converter to connect handheld throttles and feedback modules to ECoS or CS1 »Reloaded« The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld throttles and feedback modules. The ECoSniffer input offered at least a solution for handheld throttles (in combination with „older"digital command stations), whereas the feedback modules couldn’t be integrated into the system. For the first time, it is possible to connect Uhlenbrock® or Digitrax® handheld throttles directly to the ECoS or Central Station 60212 „Reloaded", thanks to the ESU L.Net Converter. Additionally, you can continue to use feedback devices which support the well-known Loconet® communication protocol. So, what can the L.Net Converter do now? Handheld throttle throughout With the L.Net Converter you are able to operate Loconet® compatible handheld throttles directly with your ECoS. Hereby, the handheld throttle´s display will always stay synchronised with the ECoS. Furthermore there is no restriction to one data format. You can control an unlimited number of locos speaking DCC, Motorola®, Selectrix® or M4®, even if the handheld throttle alone does not have the capability to do this. Particularly in Germany the popular Daisy®-, Fred®- or ProfiBoss® handheld throttles can be used, as well as e.g. DT400 or UT2 by Digitrax®. The L.Net Converter fully integrates them into the ECoS system. Via the ECoS you are able to assign the locos desired and call them up on the handheld throttle; or respectively use the easy-to-handle Fred® handheld throttles to assign the loco desired conveniently to the ECoS. Feedback modules You might already have Loconet® feedback modules for track occupancy detection. With the aid of the L.Net Converter you may now continue to use those devices. The ECoS allows you to use the contacts for activating routes or shuttle train control. Of course you can simultaneously use s88, Loconet® and ECoSDetector feedback modules. Communication Just larger layouts are operated with the support of a PC. Often there is used a self-made software, which has been optimised for Loconet®. The switch to an ECoS system which comes as an innovative and object-based communication model is thus quite rocky. However, the L.Net Converter will solve this problem. From now on, the ECoS will send loco and turnout commands via the L.Net Converter to the devices connected. The intelligent ESU L.Net Converter allows you finally to replace your »old« command station completely with an ECoS without great effort. Art.No. 50097 L.Net Converter to connect handheld throttles and feedback modules to ECoS or CS1 »Reloaded« Connection example of handheld throttles (schematical)

Selling price: CHF 102.60 RRP CHF 108.00

In stock: 1 on the shelf, shipped within 1-3 days

Docking Station for Mobile Control II / Pro with stand/wall mount and 1m USB cable
ESU 50005
Docking Station for Mobile Control II / Pro with stand/wall mount and 1m USB cable

Docking Station for Mobile Control II / Pro, Desktop/Wallmount, with USB-C cable 1m This docking station is the perfect companion for your ESU Mobile Control II or Mobile Control Pro Wi-Fi radio throttle. The docking station fulfills two tasks: Firstly, it ensures safe storage of the throttle when it is not in use. Secondly, the controller can be charged directly in the docking station. No cables need to be connected: For charging, the docking station connects to the charging points provided on the underside of every Mobile Control II or Mobile Control Pro and charges the device. To do this, the docking station is connected to a USB charger (not included!) using the USB-C cable supplied. Any (cell phone) charger available in the home is suitable. The “desktop” version of the docking station is placed directly on the layout base next to the ECoS Command Station. The angle is designed so that the throttle can be operated like a stationary controller if desired. Alternatively, the base of the docking station can be removed and the mounting plate can be screwed vertically to the layout. In this case too, the wireless controller is held securely and can of course also be charged when mounted vertically.

Selling price: CHF 38.90 RRP CHF 41.90

On order, shipped within 4-5 days

ECoSBoost external booster 7A MM/DCC/SX/M4 power supply
ESU 50012
ECoSBoost external booster 7A MM/DCC/SX/M4 power supply

ECoSBoost ext. booster, 7A, MM/DCC/SX/M4, set with power supply 120-240V, EURO + US, manual german / english Indispensable components of any large model railroad are amplifiers (here called „Booster“): If the power consumption of all of your moving trains including their functions, car illumination, and function models is larger than the current the central station is able to put out, you have to split up your layout into several blocks, the power for which is supplied by their own booster. The ECoSBoost(er) is designed for precisely that task: It is matched perfectly for the use with our ESU ECoS or the Märklin® central station. Mode of operations The ECoSBoost is connected directly to the ECoSlink jack, from where it gets its control signals. Basically it is capable of amplifying and delivering to the track these data formats: DCC, Motorola, Selectrix® and mfx®. Which data format will be put out in a given case, depends of course entirely upon the command station that’s being used, and its capabilities: Therefore the booster, connected to an ESU ECoS, will handle DCC, and Selectrix®, while, if attached to a Märklin® central station, it will amplify and deliver Motorola®-, respectively mfx® data signals.  Thanks to „Plug&Play“, all ECoSBoost(ers) are included automatically into a list of extern ECoSlink components, and can be controlled and configured centrally on the ECoS display. The correct firmware status is essential to make the ECoSBoost work properly with these command stations: If the interior software is too old, the booster will possibly not be recognized. Please check the sytem reqirements. Functions ECoSBoost amplifies data signals generated by the digital central station, and delivers them to the designated track outlet. ECoSBoost power comes from an included power supply, featuring a stabilized DC output. Each ECoSBoost is controlled and configured comfortably directly by the ECoS: For each booster you can individually determine its max permissible output current. What’s more, the display can be dialled up to show you the present power consumption of each booster, so you know how much „reserves“ you still got. Extremely sensible is the option to tell each booster individually, weather or not to shut down its section in case of a layout short circuit. For example, if you have your switch (turnout) decoders hooked up to a separate ECoSBoost, you can still control your switches reliably in case of a track short. Feedback An ECoSBoost can do more than amplify and deliver track current: Each one has incorporated, as a standard feature, a feed back function (Global Detector) for the NMRA Bidirectional Communication. With its help, appropriately equipped locos can send back information to the ECoS, as soon as the relevant DCC – norm is adopted. This is immensely helpful in finding the loco’s position on the layout, or reading out engine data. ECoSBoost reads the data and sends them via the ECoSlink high speed bus to ECoS for further processing. Protection Each ECoSBoost of course meets the relevant requirements regarding safety and operation on a layout: The track outlet is protected against overload as well as short circuits. Of course ECoSBoost can differentiate between a „genuine“ short, and a momentary current drain when passing over switches or gaps. We place value on the indestructibility of the device, just like we do with our mobile decoders. Future built-in The operational software of each, in an ECoSBoost integrated micro controller can be updated, of course, if need be, and augmented by additional functions: The required upgrade is performed automatically bythe ECoS central station, if necessary. No action on your part is required! In this way your ECoSBoost is literally always „up to date“!

Regular price: CHF 298.00

On order, shipped within 4-5 days

10% off the recommended price
ECoS detector feedback module
ESU 50094
ECoS detector feedback module

ECoSDetector feedback module, 16 digital inputs, of which 4 inputs are RailCom® feedback sections. Digital inputs for 2-rail or 3-rail operation reversible, OPTO Our ECoSDetector feedback modules should be used to automate train operations. Beside the usual track occupancy detection, the train specific identification number can be read. It also enables the implementation of an external track control board. On larger layouts, the operator would want to determine the actual position of locos and trains. With the knowledge of which track section is currently occupied or of which track is still free in the hidden yard, an automated operation is made possible. The ECoSDetector is compatible with all ECoS command stations or Central Station®s (providing the Central Station® has been updated with the Central Station® upgrade software) and is able to detect up to 16 track sections. Two-rail or three-rail tracks can be directly connected to the module. Beside the 16 track occupancy detectors or feedback sections, each ECoSDetector can also detect a locomotive ID on up to four track sections, providing that RailCom® decoders are used. If desired, the ECoSDetector functionality can be extended with the ECoSDetector Extension module. When docked to the side of the ECoSDetector, if offers up to 32 outputs, each displaying the status of the track sections with a control light or driving a suitable block signal. Detection and feedback The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Each of the 16 inputs has a maximum current capability of 3A. The ECoSDetector module also has two separate power inputs, and can be supplied from two separate Booster units. Opto-couplers are used to provide a reliable detection. Two or three rail operation is easily selected through jumpers. Input devices Up to 16 regular switching devices can also be used as inputs. Reed switches, detection track sections, push buttons or toggle switches can all be connected to the inputs. The information is then processed in the command station. Train ID detection Beside conventional track occupancy detection, each ECoSDetector has the additional ability to monitor four of the 16 track sections for train identification: Via the RailCom® technique (so-called „local detectors“) you will not only easily find out that there’s currently a loco on this track section, but also identify which specific loco it is (train ID detection). However, this only works with RailCom®-compatible loco decoders. Smart With the knowledge of the train specific position, new functions can be implemented, using the route control module of the ECoS command station. For example, you can automatically activate the horn of a loco when it is about to pass a railway crossing or determine which loco is parked in the hidden yard. It is also possible to de-bounce switch inputs or track occupancy detectors electronically to ensure a reliable feedback  in case of unreliable contact or very dirty tracks. ECoSlink connection Every ECoSDetector can be directly connected to the command station via the ECoSlink bus. Beside all ECoS command stations you can also use the Central Station® (updated with the Central Station® with software upgrade by ESU) The galvanic isolation of the bus systems and the command station guarantees the best-possible reliable operation and a reliable data transmission to the command station. All ECoSDetector modules will be detected automatically by the command station and the information integrated in the operation control routine. The configuration of the devices can be also carried out directly with the command station after installation. Upgradeable When needed, the ECoSDetector software can be upgraded to add new functionalities. The command station will perform the required updates completely automatically. This will guarantee at all times that the ECoSDetector remains at the most current technical status. Art.No. 50094 ECoSDetector feedback module, 16 digital inputs, of which 4 inputs are RailCom® feedback sections. Digital inputs for 2-rail or 3-rail operation reversible, OPTO 50094

Selling price: CHF 208.00 RRP CHF 233.00

On order, shipped within 4-5 days

ECoS Detector Out Extension
ESU 50095
ECoS Detector Out Extension

ECoSDetector Output Extension module. For connection of 32 bulbs/LEDs for illuminating track sections or block signals If required, each ECoSDetector can be supplemented by a ECoSDetector Extension module, which can be easily connected to the ECoSDetector. Every ECoSDetector Extension module offers 32 transistor outputs. Outputs Each one of the 32 outputs provides current up to 100mA max. Since these outputs are conducted as „open collectors", you are able to connect either small light bulbs or LEDs with current limiting resistor directly to it. The total current of all outputs must not exceed 1.5A! Any DC or AC transformer (15V - 19V) can be used for supply. Track occupancy and block signals Outputs can be used to display the state of each single-track section externally (e.g. on the track control panel). Alternatively, you have the possibility to show each track section´s state on the display via a block signal (red/green). The transistor outputs of the ECoSDetector Extension module can be easily programmed within the required operational mode via your ECoS command station. Track control panel However, the combination of the ECoSDetector and the Extension module is capable to do even more: Just go ahead and built your own track control panel! To make this possible, you need to connect push buttons or toggle switches to the ECoSDetector´s outputs, which is then able to operate turnouts and routes over the command station. The transistor outputs of the Extension module are meant for illuminating track sections. The whole configuration procedure can be easily completed on the display of your ECoS command station. If you wish to built a larger track control panel, you can also combine several ECoSDetector modules. In doing so, you are able to built and control up to 100 track control panels per layout. Art.No. 50095 ECoSDetector Output Extension module. For connection of 32 bulbs/LEDs for illuminating track sections or block signals 50095

Selling price: CHF 55.90 RRP CHF 60.90

On order, shipped within 4-5 days

ECoS Detector feedback module standard
ESU 50096
ECoS Detector feedback module standard

ECoSDetector Standard feedback module for 3-digit layouts, 16 digital inputs, OPTO The ECoSDetector Standard is made for all model railroaders who look for a reliable and affordable contact based detector module without needing the expandable functions of the 50094 ECoSDetector. The ECoSDetector Standard is primarily meant to be a substitute for the aged s88 feedback modules: modifications on track work wiring are not necessary. Detection The ECoSDetector is able to monitor up to 16 track sections by means of track switches, reed contacts, and/or externally supplied switches. Detector inputs do not connect to the rails. For current sensing detection, a 50094 ECoSDetector and/or 50098 ECoSDetector RC is required. Operation with every 3-digit track is possible, no matter if you have a M-, K-, or C-track. Operation with 2-rail track systems is also supported. Switch inputs The 16 inputs can be used as conventional switch inputs: Connect the reed contacts as well as the contact tracks or switches (and toggle switches) with it and handle the information given with the help of your central station. ECoSlink connection Every ECoSDetector Standard can be directly connected to the command station via the ECoSlink bus. Beside all ECoS command stations you can also use the Central Station® (updated with the Central Station® with software upgrade by ESU). The module will be automatically linked to the command station and also graphically configured. Upgradeable When needed, the ECoSDetector software can be upgraded to add new functionalities. The command station will perform the required updates completely automatically. This will guarantee at all times that the ECoSDetector remains at the most current technical status. Art.No. 50096 ECoSDetector Standard feedback module for 3-digit layouts, 16 digital inputs, OPTO 50096

Selling price: CHF 84.90 RRP CHF 92.90

On order, shipped within 4-5 days

ECoSDetector RC feedback module for DC and AC
ESU 50098
ECoSDetector RC feedback module for DC and AC

ECoSDetector RC feedback module, all 4 inputs are RailCom® feedback sections. Digital inputs for 2-rail operation, OPTO The new ECoSDetector RC can monitor its 4 track sectors in a special way: with the aid of  the RailCom® technology (“local detector”) one can not only find out if the track is occupied but also exactly which train is located there (train number detection).  Of course, you must have RailCom® capable locomotive decoders. Clever Knowing which train is located where leads to new functions in conjunction with the route setting feature of the ECoS: you may, for instance, activate level crossing booms automatically or the train search for an unoccupied track in the storage yard. The switching inputs respectively track occupancy sensors are electronically “entprellt“ in order to assure reliable feedback even in case of poor contact or pretty dirty tracks. Connection to ECoSlink Each ECoSDetector RC is directly wired to the command station via the EcoSlink bus. Besides the ECoS command station all types of the Central Station® Reloaded with ESU update are suitable. The galvanic separation of the bus system and the command station assures best possible reliability and data transfer to the command station. The command station automatically detects and registers all ECoSDetector modules. The devices can be comfortably and easily configured with the command station, which can also be done after installing the devices. Future proof The operating software of each ECoSDetector can be updated and expanded to facilitate additional functions, if necessary: whenever necessary this update will be accomplished automatically by the command station. Thus your ECoSDetector is technically always up-to-date. Art.No. 50098 ECoSDetector RC feedback module, all 4 inputs are RailCom® feedback sections. Digital inputs for 2-rail operation, OPTO 50098

Selling price: CHF 107.00 RRP CHF 118.00

On order, shipped within 4-5 days

ECoSlink Terminal Distribution Module for ECoS CS1 CS2
ESU 50099
ECoSlink Terminal Distribution Module for ECoS CS1 CS2

ECoSLink Terminal bus distribution plate, 6 slave jacks, with 0.9m cable feedback modules to connect to your ECoS command station, and you are running out of connectors, you should buy the ECoSlink Terminal. More room The ECoSlink Terminal will be connected to the ECoS or central station® via the provided bus cable to the „extend" jack. It offers on the front panel two jacks for hand controllers (e.g. mobile station®) and at the back four sockets for devices mounted under the layout. These include mainly ECoSBoost booster and ECoSDetector feedback modules. The ECoSlink Terminal can provide power to all attached devices either from the ECoS power supply, or for a section from an external power supply through the ECoSlink themselves. This is especially useful for larger systems with many hand controls, boosters and feedback modules. More distance If more than one ECoSlink Terminal is used, the terminals can be connected to each other with standard Ethernet patch cables with RJ45 connectors. These patch cables can be purchased in any computer store in any length. More organisation Each ECoSlink Terminal is usually at the front panel of the layout installed: Only the front panel is visible. This reduces the cable clutter under the layout. More flexibility The ECoSlink Terminal can be used on ECoS and central station®. The CAN bus is only passively distributed together with the supply and booster cables and the termination is ensured. The function is transparent for the digital control unit. Since an interference in the communication of the bus does not take place, thus alone decide the control unit and the connected devices whether they will work together. Art.No. 50099 ECoSLink Terminal bus distribution plate, 6 slave jacks, with 0.9m cable 50099

Selling price: CHF 62.90 RRP CHF 67.90

On order, shipped within 4-5 days

Mobile Control Pro wireless handheld controller + Access Point set for ECoS/Z21/CS3 in German/English
ESU 50115
Mobile Control Pro wireless handheld controller + Access Point set for ECoS/Z21/CS3 in German/English

Mobile Control Pro wireless throttle + Access Point set for ECoS/CabControl/Z21/CS3, german / english The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command stations. The Mobile Control Pro is therefore not limited to use with ESU command stations. Open Platform Based on Android 10, the Mobile Control Pro is just as easy to use as you would expect from your smartphone or tablet. With the help of a high-resolution color touchscreen, the operating system ensures standardized, intuitive operation. The Mobile Control Pro is equipped with a powerful quad-core ARM processor with a large memory that can store a large number of apps. The built-in radio module supports common Wi-Fi standards in the 2.4 GHz range as well as the well-known Bluetooth standards. Thanks to the standardized radio interface, trouble-free operation of your model railway layout is guaranteed at all times. With the help of Wi-Fi repeaters, the radio range can be easily extended if necessary. The built-in lithium polymer battery – which is easily replaceable if necessary – lasts for about five to six hours of operation. The Mobile Control Pro charges via its built-in USB-C port. Any USB-C cable can be used for charging such as a USB port in a wall outlet, USB charging adapter, or USB port on a computer. Using the pre-installed Aurora app store, you can install additional Android apps at any time. A Google account is not required. Ergonomics When you hold the Mobile Control Pro in your hands for the first time, you will immediately notice its excellent ergonomics. All controls are within easy reach with one hand, and the most important functions can even be accessed "blindly," allowing you to keep your eyes on your layout and your trains. This is made possible by the central, motor-controlled rotary control with end stop. With it, you can precisely adjust the locomotive's speed and change the direction of travel. Programmable buttons (two on the left and two on the right sides) on the device are provided for various functionality. These can be used as an alternative to the touchscreen. A highlight is the "slider" installed on the right side for use as a “brake”: Using this analog control element, you can now precisely stop your locomotives equipped with LokSound 5 decoders, thus controlling them even more realistically. ESU The Mobile Control Pro is perfectly coordinated with ECoS and CabControl digital command stations. The command station synchronizes all data with the wireless handheld controller, so you don't have to enter any data locally. The names, addresses, and correct symbols for accessories and routes are also displayed. All information you enter in the ESU command station is automatically transferred and synchronized. Up to 16 Mobile Control Pro devices can be operated. WiThrottle™ That's not all! The Mobile Control Pro app also connects to all digital command stations that have implemented a WiThrottle™ server. This means you can use the Mobile Control Pro with a Uhlenbrock Intellibox Neo, a Digitrax® command station with an LNWI module, or an NCE command station with a WifiTrax WLAN adapter. MRC / Gaugemaster command stations with a WiFi adapter or YaMoRC® are also included. Depending on the functionality of the WiThrottle™ server in the aforementioned command stations, the locomotive fleet can either be used directly or locomotives can be created manually in the Mobile Control Pro. Z21® The Mobile Control Pro can also connect directly to ROCO's Z21® command stations. However, all locomotives must be created and managed locally on the Mobile Control Pro. Unfortunately, the Z21® does not have a centrally managed locomotive database. Märklin® Central Station 3® Owners of a Märklin® Central Station 3® can also use the Mobile Control Pro. The app can directly access the entire locomotive inventory of the central station and displays the locomotive icons and images just as they appear on the central station. Controlling Locomotives The Mobile Control Pro can, of course, be used to control locomotives. Depending on the capabilities of the DCC command station connected, all relevant data is retrieved and used from the command station central station where possible. All essential locomotive properties such as the locomotive name, locomotive symbol, function key assignment, and function key symbols can be displayed and changed as needed. Up to 31 function keys can be activated per locomotive, which can be individually configured as latching or momentary functions. Switching Solenoid Accessories Switching solenoid accessories is also possible – depending on the command station. When operating with an ECoS command station, all solenoid accessories and routes located on the interlocking system can be switched. Naturally, the distinction between two, three, and four aspect solenoid accessories is fully maintained, and the correct symbol is displayed on the screen. Smart Connection The Mobile Control Pro uses the Wi-Fi standard to communicate with the command station. Therefore, you must connect the command station to a Wi-Fi network. If you already have a Wi-Fi router (e.g., AVM® FritzBox®), you can easily connect the ECoS command station to it. If you don't want to connect your model railway to your home network or you want to remain flexible for exhibitions, this is also no problem, upon request, we can supply a mini access point for the Mobile Control Pro, which can be easily set up in just a few steps using the ECoS. Other command stations, such as the ESU CabControl or the Intellibox Neo, already have a Wi-Fi connection built in; in this case, you can connect the handheld controller directly to the Wi-Fi network provided by these command stations. Future-proof ESU is constantly developing the Mobile Control Pro app. New app versions can either be transferred to the handheld controller using your Windows® computer or are installed automatically, provided the Mobile Control Pro has an internet connection. (WiThrottle™ is a registered trademark of Brett Hoffman)

Regular price: CHF 375.00

On order, shipped within 4-5 days

10% off the recommended price
Mobile Control Pro wireless handheld controller, single controller for ECoS, Z21, CS3
ESU 50116
Mobile Control Pro wireless handheld controller, single controller for ECoS, Z21, CS3

Mobile Control Pro wireless throttle for ECoS/CabControl/Z21/CS3, german / english The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command stations. The Mobile Control Pro is therefore not limited to use with ESU command stations. Open Platform Based on Android 10, the Mobile Control Pro is just as easy to use as you would expect from your smartphone or tablet. With the help of a high-resolution color touchscreen, the operating system ensures standardized, intuitive operation. The Mobile Control Pro is equipped with a powerful quad-core ARM processor with a large memory that can store a large number of apps. The built-in radio module supports common Wi-Fi standards in the 2.4 GHz range as well as the well-known Bluetooth standards. Thanks to the standardized radio interface, trouble-free operation of your model railway layout is guaranteed at all times. With the help of Wi-Fi repeaters, the radio range can be easily extended if necessary. The built-in lithium polymer battery – which is easily replaceable if necessary – lasts for about five to six hours of operation. The Mobile Control Pro charges via its built-in USB-C port. Any USB-C cable can be used for charging such as a USB port in a wall outlet, USB charging adapter, or USB port on a computer. Using the pre-installed Aurora app store, you can install additional Android apps at any time. A Google account is not required. Ergonomics When you hold the Mobile Control Pro in your hands for the first time, you will immediately notice its excellent ergonomics. All controls are within easy reach with one hand, and the most important functions can even be accessed "blindly," allowing you to keep your eyes on your layout and your trains. This is made possible by the central, motor-controlled rotary control with end stop. With it, you can precisely adjust the locomotive's speed and change the direction of travel. Programmable buttons (two on the left and two on the right sides) on the device are provided for various functionality. These can be used as an alternative to the touchscreen. A highlight is the "slider" installed on the right side for use as a “brake”: Using this analog control element, you can now precisely stop your locomotives equipped with LokSound 5 decoders, thus controlling them even more realistically. ESU The Mobile Control Pro is perfectly coordinated with ECoS and CabControl digital command stations. The command station synchronizes all data with the wireless handheld controller, so you don't have to enter any data locally. The names, addresses, and correct symbols for accessories and routes are also displayed. All information you enter in the ESU command station is automatically transferred and synchronized. Up to 16 Mobile Control Pro devices can be operated. WiThrottle™ That's not all! The Mobile Control Pro app also connects to all digital command stations that have implemented a WiThrottle™ server. This means you can use the Mobile Control Pro with a Uhlenbrock Intellibox Neo, a Digitrax® command station with an LNWI module, or an NCE command station with a WifiTrax WLAN adapter. MRC / Gaugemaster command stations with a WiFi adapter or YaMoRC® are also included. Depending on the functionality of the WiThrottle™ server in the aforementioned command stations, the locomotive fleet can either be used directly or locomotives can be created manually in the Mobile Control Pro. Z21® The Mobile Control Pro can also connect directly to ROCO's Z21® command stations. However, all locomotives must be created and managed locally on the Mobile Control Pro. Unfortunately, the Z21® does not have a centrally managed locomotive database. Märklin® Central Station 3® Owners of a Märklin® Central Station 3® can also use the Mobile Control Pro. The app can directly access the entire locomotive inventory of the central station and displays the locomotive icons and images just as they appear on the central station. Controlling Locomotives The Mobile Control Pro can, of course, be used to control locomotives. Depending on the capabilities of the DCC command station connected, all relevant data is retrieved and used from the command station central station where possible. All essential locomotive properties such as the locomotive name, locomotive symbol, function key assignment, and function key symbols can be displayed and changed as needed. Up to 31 function keys can be activated per locomotive, which can be individually configured as latching or momentary functions. Switching Solenoid Accessories Switching solenoid accessories is also possible – depending on the command station. When operating with an ECoS command station, all solenoid accessories and routes located on the interlocking system can be switched. Naturally, the distinction between two, three, and four aspect solenoid accessories is fully maintained, and the correct symbol is displayed on the screen. Smart Connection The Mobile Control Pro uses the Wi-Fi standard to communicate with the command station. Therefore, you must connect the command station to a Wi-Fi network. If you already have a Wi-Fi router (e.g., AVM® FritzBox®), you can easily connect the ECoS command station to it. If you don't want to connect your model railway to your home network or you want to remain flexible for exhibitions, this is also no problem, upon request, we can supply a mini access point for the Mobile Control Pro, which can be easily set up in just a few steps using the ECoS. Other command stations, such as the ESU CabControl or the Intellibox Neo, already have a Wi-Fi connection built in; in this case, you can connect the handheld controller directly to the Wi-Fi network provided by these command stations. Future-proof ESU is constantly developing the Mobile Control Pro app. New app versions can either be transferred to the handheld controller using your Windows® computer or are installed automatically, provided the Mobile Control Pro has an internet connection. (WiThrottle™ is a registered trademark of Brett Hoffman)

Selling price: CHF 322.00 RRP CHF 361.00

On order, shipped within 4-5 days

14% off the recommended price
ECoS 2.5 Central Station 6A 7" TFT Display Capacitive Touch MM/DCC/SX/M4 Power Supply 90-240V
ESU 50220
ECoS 2.5 Central Station 6A 7" TFT Display Capacitive Touch MM/DCC/SX/M4 Power Supply 90-240V

ECoS 2.5 system, 6A, 7" TFT display, Capacitive Touch,MM/DCC/SX/M4, powersupply 90-240V EU, output 15-21V 150W, German manual The ECoS 50220 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio. The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured. ECoS has 9 function keys per integrated cab. The light-, and function keys 1 to 8 show the current state of the function via LEDs. Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it! ECoS Features With an ECoS command station you acquire an open system. As is expected of ESU, from the beginning we wanted to be open to, and compatible with, present systems and norms. Just like our decoders, the ECoS is a real multi-protocol command station. As a multi-protocol command station, ECoS supports DCC, Märklin® Motorola®, Selectrix® and the M4 data protocol. M4 drives and controls locomotives equipped with mfx® decoders without any restrictions. M4 is completely compatible. You can even continue to use almost all of your present loco decoders. ECoS is therefore the only digital command station worldwide that unifies 4 data protocols. With an ECoS you can run locos: via two integrated cabs with large, easy-grasp motor driven throttle knobs and nine precise click-function keys you control your locos. In combination with the touch screen, you can control up to 31 functions per engine. ECoS controls turnouts and magnetic accessories: a large, graphical control panel provides you access for up to 1420 turnouts (DCC or Motorola® protocol). With ECoS you can plan and control routes: simply put turnouts and magnetic accessories graphically in groups and switch them together. Routes will be activated either by feedback contacts or by key. You can even use s88 occupancy detectors or ECoSDetector feedback modules. With ECoS you can operate shuttle trains very easily: put a rail contact at both ends of the track and ECoS will do the rest. The ECoS built-in booster has so much power that, in most cases, you don‘t need additional ones. ECoS supports EcoSlink, a high-speed bus system, based on CAN, that transmits data instantaneously to the command station. With ECoS, never before has it been so simple to program your decoders: the large, colored TFT screen offers good contrast and displays a lot of information in unabbreviated text. A programming track establishes contact with your decoders. Of course, the ECoS has a pre-installed DCC RailCom® function: with its „global detector“ it recognizes RailCom®-compatible decoders (e.g. our LokPilot V4.0 decoder) directly on the main track. You also have the possibility to feedback the turnout position via the SwitchPilot to the ECoS command station. ECoS is compatible. Besides Selectrix®, Märklin®-Motorola®, and M4, ECoS speaks all variants of the DCC-Norm. With the integrated analog controllers (joysticks) you can even control the whistle of LokSound decoders, never before more precisely. ECoS is expandable. Each ECoS command station sports a network port for connection with a computer. Thus you can update software or use a computer for operation. Who needs ECoS? ECoS is basically the command station for all. Beginners, who are looking for a simple-to-operate cab, will be at home right away: the large, graphic touch screen display shows all information in plain text; in case of doubt use the integrated help function. Never was it easier to switch to digital control. And ECoS runs DC or AC driven trains (compatible decoder provided). Even model railroaders, who alredy own a digital command station, should step up to ECoS: next to the extreme simple inputs, and the possibilities for route-and shuttle train programming, you will learn to appreciate the manifold programming features for decoders. You can connect your present equipment to the input of EcoSniffer, and continue to use it: you don‘t need to discard anything that you want to keep using! Due to its enormous output-performance, the ECoS command station is recommended especially for operators of Gauge 1 or G layouts: at last you can run multiple trains without an external booster. Total interplay with our LokSound XL V4.0 decoders is matter of fact. Art.No. Delivery 50220 ECoS 2.5 system, 6A, 7" TFT display, Capacitive Touch,MM/DCC/SX/M4, powersupply 90-240V EU, output 15-21V 150W, German manual

Selling price: CHF 701.00 RRP CHF 824.00

On order, shipped within 4-5 days

10% off the recommended price
Cab Control DCC with Mobile Control 7A Set
ESU 50311
Cab Control DCC with Mobile Control 7A Set

Cab Control DCC Digital System, with Mobile Control Pro, 6A, Set with Power Supply Input 110–240V EU, Output 15–21V, DE/EN Manual With CabControl, we combine the ease of use of our popular MobileControl Pro handheld controller with the Integrated Control Unit (ICU) base station, which incorporates a powerful booster, a high-quality DCC command station with RailCom® and RailComPlus®, and a complete Wi-Fi access point. With its 6 A output power, the CabControl is an ideal command station for model railway enthusiasts of all gauges who are looking for simple wireless hand-held operation, but do not want to forgo the convenience of automatic locomotive detection and comfortable locomotive control. Controlling locomotives The Integrated Control Unit (ICU) is a fully featured DCC digital command station with RailCom® and RailComPlus® data format, capable of controlling up to 16,384 locomotives. Up to 31 functions can be assigned to each locomotive. Individual function button symbols are managed for each locomotive as a matter of course, as is the locomotive name. A locomotive symbol can be selected directly on the handheld controller. If your locomotive is fitted with a RailComPlus®-compatible decoder, the locomotive will be recognised automatically the first time it is placed on the track, and all its properties will be imported. You will not need to change anything in the configuration. If required, the locomotive's address will be reprogrammed fully automatically. The Mobile Control Pro handheld controller, developed specifically for controlling model railways, offers a finely responsive rotary control and four tactile function keys on the sides, which ensure error-free operation without looking at the controller. The display with a resolution of 480×800 pixels shows all information in plain text at all times. Up to 32 wireless handheld controllers can be managed. Switching points/solenoid accessories Using the control panel, up to 1000 solenoid accessories (points, signals) can be switched directly from the handheld controller. Programming the decoder The CabControl system can both programme locomotives directly on the main track using POM and read them back directly using RailCom®. A programming track can of course also be connected to the ICU. Booster The integrated booster with 6 A output power is strong enough to supply even Scale 1 or G scale layouts with current. The track voltage can be adjusted directly on the supplied power supply to suit the gauge. Cab Control is compatible with all gauges. Connectivity The Integrated Control Unit (ICU) incorporates a full Wi-Fi access point as well as a LAN socket and a USB socket. This means the system can, if desired, be connected directly to your home network and supplemented with an optional computer control solution. All well-known software products are supported by the ICU, as the protocol is designed to be compatible with the ECoS. If PC software is used, ECoSDetector feedback modules for track occupancy detection can also be connected to the ECoSLink bus and read directly by the software. The USB socket can be used either to charge the Mobile Control Pro directly, or to connect a USB stick for data backup or software updates for the ICU. Base unit: command station with ARM controller and Linux® operating system. Integrated booster with 6 A continuous output. RailCom® feedback integrated. Programming track output with 0.6 A output. 1 connection for ECoSlink devices. Connection for ECoSlink bus extension. 10/100 Mbit Ethernet connection. Integrated Wi-Fi access point, configurable as master or client. Features DCC with 14, 28, 128 speed steps. RailCom® and RailComPlus®. Up to 9,999 addresses. Up to 31 function keys per locomotive. Up to 16,384 locomotive objects, 1,024 point objects. 32 multiple tractions each with up to 16 locomotives. Contents supplied Integrated Control Unit (ICU). Power supply with adjustable output voltage 15V–21V. Mobile Control Pro handheld controller with neck strap and USB charging cable. Connection terminals for track & programming track. Comprehensive operating instructions.

Selling price: CHF 610.00 RRP CHF 684.00

On order, shipped within 4-5 days