Locomotives H0
220 076, DB, dark red, DC/AC The V200 was THE locomotive face of the German Federal Railway (DB) in the 1950s. No other diesel locomotive shaped the image of the young DB as much as the long locomotive with its characteristic aluminium decorative strips, which tapered at the front ends into a stylised "V". The production locomotives built from 1956 onwards were fitted with 1,100 hp (at 1,500 rpm) 12-cylinder engines from Daimler-Benz (MB 820 Bb), MAN (12 V 18/21) or Maybach (MD 650). A Hagenuk steam heating boiler provided train heating, capable of heating an express train of ten to twelve coaches. A notable feature was the fitting of all V200.0 locomotives with multiple-unit control equipment, which enabled double-heading and push-pull operation. With Krauss-Maffei (V200 001–005, V200 026–086) and MaK (V200 006 to 025), only two manufacturers supplied the 86 locomotives to the DB. The MaK locomotives were clearly distinguishable at the front by a flatter version of the "V" compared with the Krauss-Maffei locomotives. The first allocations of production locomotives went to the motive power depots (Bw) at Frankfurt-Griesheim (15 locomotives), Hamburg-Altona (19), Hamm P (32) and Villingen/Schwarzwald (20). From the factory, V200 056 to 086 received simple DB logos on their sides instead of the prominent "Deutsche Bundesbahn" lettering. From the early 1970s onwards, the aluminium decorative strips were removed and the locomotives were given a decorative line as a dividing element between the red and grey areas. Three V200 locomotives were repainted in the 1970s in the then fashionable colours of ocean blue and ivory. The distinctive "V" on the front ends was omitted. After the DB had already withdrawn the Class 220 from service from 1978 onwards, it offered the locomotives, some of which were barely 20 years old, for sale to foreign railways. A total of 30 locomotives found buyers in Italy, France (Algeria) and Spain. Body and frame made of metal Open grille ventilators in the roof area, flat MaK "V" on the front ends Multicoloured cab with driver figure Prototypical partial view through the engine room Multi-part bogie fairings Separately applied handrails and steps Close coupler in a guided NEM pocket Five-pole ESU motor with two flywheels Drive via cardan/worm gearing to three axles, two traction tyres LokSound decoder for DCC, Motorola®, M4, and Selectrix operation Automatic registration with command stations featuring RailComPlus® or mfx® functionality PowerPack buffer capacitor for uninterrupted power supply Dual speaker with large sound capsule for the ultimate sound experience Universal electronics with plug-in pickup shoe and switch for changing between two-rail and centre-rail operation 2 smoke generators, synchronised with the LokSound; during shunting operations only one smoke generator is active Digitised original sounds of a locomotive with V 200 with Maybach diesel engines MD 650 Sensor-controlled sounds during slow curve negotiation Direction-dependent lighting changeover, train-end headlights can be switched off, shunting, cab, driver's desk and engine room lighting Brake sparks when braking hard Pipette for filling the smoke generator, buffer beam detail parts and a 2nd coupler are included The minimum radius for operation is 360 mm Length over the buffers = 209.7 mm
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
220 060, DB, ocean blue/beige, DC/AC The V200 was THE locomotive face of the German Federal Railway (DB) in the 1950s. No other diesel locomotive shaped the image of the young DB as much as the long locomotive with its characteristic aluminium decorative strips, which tapered at the front ends into a stylised "V". The production locomotives built from 1956 onwards were fitted with 1,100 hp (at 1,500 rpm) 12-cylinder engines from Daimler-Benz (MB 820 Bb), MAN (12 V 18/21) or Maybach (MD 650). A Hagenuk steam heating boiler served for train heating, capable of heating an express train of ten to twelve coaches. A particular feature was the fitting of all V200.0 locomotives with multiple-unit control, which enabled double-heading and push-pull operation. With Krauss-Maffei (V200 001–005, V200 026–086) and MaK (V200 006 to 025), only two manufacturers supplied the 86 locomotives to the DB. The MaK locomotives differed noticeably at the front by having a flatter version of the "V" compared to the Krauss-Maffei locomotives. The first allocations of production locomotives went to the motive power depots (Bw) of Frankfurt-Griesheim (15 locomotives), Hamburg-Altona (19), Hamm P (32) and Villingen/Schwarzwald (20). From the factory, V200 056 to 086 received simple DB logos on their sides instead of the prominent "Deutsche Bundesbahn" lettering. From the early 1970s, the aluminium decorative strips were removed and the locomotives were given a decorative line as a separation between the red and grey areas. Three V200 locomotives were repainted in the 1970s in the then fashionable colours of ocean blue and ivory. The distinctive "V" on the front ends was omitted. After the DB had already withdrawn the Class 220 from 1978 onwards, it offered the locomotives, some barely 20 years old, for sale to foreign railways. A total of 30 locomotives found buyers in Italy, France (Algeria) and Spain. Body and frame made of metal Open grille ventilators in the roof area, flat MaK "V" on the front ends Multicoloured cab with driver figure Prototypical partial view through the engine room Multi-part bogie fairings Separately applied handrails and steps Coupler in guided NEM pocket Five-pole ESU motor with two flywheels Drive via cardan/worm gearing to three axles, two traction tyres LokSound decoder for DCC, Motorola®, M4, and Selectrix operation Automatic registration with command stations featuring RailComPlus® or mfx® functionality PowerPack buffer capacitor for uninterrupted power supply Dual speaker with large sound capsule for the ultimate sound experience Universal electronics with plug-in pickup shoe and switch for changing between two-rail and centre-rail operation 2 smoke generators, synchronised with the LokSound; during shunting operations only one smoke generator is active Digitised original sounds of a locomotive with V 200 with Maybach diesel engines MD 650 Sensor-controlled sounds during slow curve negotiation Directional lighting changeover, the leading headlights can be switched off, shunting lighting, cab lighting, control desk lighting, and engine room lighting Brake sparks when braking hard Pipette for filling the smoke generator, buffer beam detail parts and a 2nd coupler are included The minimum radius for operation is 360 mm Length over the buffers = 209.7 mm
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
202 594 DB, traffic red, Era V, DC/AC The most widely built German main-line diesel locomotive class must, of course, have a place in the ESU range as a fully equipped H0 model. The features found on its DB sister are present here too. One particular challenge was to replicate the two traction motor cooling fans, which are controlled independently in the prototype, as separately switchable motors in the model as well. The etched fan covers allow the work of the fan wheels to be observed, supported acoustically by the corresponding sounds. To ensure that the crisp sound of the 12 KVD diesel engine comes across well, we fitted the loudspeaker with a so-called passive radiator and developed a sound chamber that makes the best possible use of the available space. It goes without saying that a sound-synchronised smoke generator, a bell-armature motor with flywheel, digital couplers at both ends, sprung buffers, and numerous lighting functions are all on board. As you have come to expect from ESU, we studied the prototype closely when designing our models and reproduced the details with minimal compromise. On locomotives fitted with a steam heating boiler, you will find the corresponding pipework; the ventilation grilles are made up of multiple parts; and the characteristic reflectors of the lower headlamps give the model a face even when the lighting is switched off. As with all our V100 models, the magnetically secured cab roof can be lifted off, and the personal equipment of the locomotive crew can be supplemented further as desired. A particularly large number of details are revealed by the running gear, especially in the light grey livery to TGL 1808. Deeply engraved bogie side frames, differently equipped depending on the variant, with real springs and open or covered areas beneath the frame according to type, impressively demonstrate the differences within the locomotive family. Except on the traffic red version, the Reichsbahn lettering and running number plate are included as etched parts. For the class 111 locomotives, which have a lower maximum speed in the prototype, we have of course not simply reduced the top speed in a blunt fashion, but have adjusted all CVs relevant to the running dynamics accordingly. NEW TOOLING Metal body and frame Digitally switchable coupler Situation-dependent and sequentially activated motor-driven cooling fans in the long hood Bell-armature motor with flywheel Drive via cardan/worm gearing to all four axles, two traction tyres LokSound 5 decoder for DCC, Motorola®, M4 and Selectrix operation Switchable smoke generator with smoke output synchronised to the LokSound Automatic registration with command stations featuring RailComPlus® or mfx® functionality Universal electronics with plug-in pickup shoe and sliding switch for changing over between two-rail and centre-rail operation PowerPack buffer capacitor for uninterrupted power supply High-quality speaker with a large sound capsule for the ultimate listening experience Digitalised original sounds of a 12 KVD 18/21 diesel engine Squealing sound via curve sensor when travelling slowly through curves Direction-dependent lighting changeover (the lights switch on one after another in a prototypical manner), leading headlights can be switched off, cab and driver's desk lighting Brake sparks during hard braking Separately applied handrails, steps partially open-framed Delicate multi-part grilles on the sides of the long nose Removable roof held in place by magnets (Note: do not lift the model by the roof!) Finely detailed, multi-colour cabs, engine driver figure Sprung buffers Pipette for filling the smoke generator is included The minimum radius for operation is 360 mm. Length over the buffers 110 = 160.2 mm, 111, 202 = 163.7 mm The Deutsche Reichsbahn of the GDR did not include a medium-power line diesel locomotive between the V60 and the V180 when drawing up its diesel locomotive type programme in the 1950s. When the need became acute in the early 1960s, VEB Lokomotivbau "Karl Marx" and the Elektrotechnische Werke "Hans Beimler" developed the V100 with the stipulation that as many assemblies as possible from the V60 and V180 should be used, the 100 standing for an output of approximately 1,000 hp. The three pre-production locomotives delivered in 1965 were initially fitted with only 900 hp twelve-cylinder engines of the type 12 KVD 18/21. The maximum speed was 100 km/h. After extensive testing, series production began as early as the following year. A total of 869 locomotives were built across several series, making the V100 the most-produced line locomotive of the DR. Already in the first years of service it became apparent that the V100 (or Class 110, as it was known from 1969 onwards in accordance with data-processing requirements) could not replace all steam locomotive classes with a similar operating profile. Through advances in engine development and the installation of charge-air cooling, the output and reliability of the 12 KVD type were improved. The final development stage of the 12 KVD engine was set at 1,100 kW, almost 400 kW more than in the first production series. For export, including to China, LEW derived the V100.3 sub-class from the V100, intended for heavy shunting duties and with a maximum speed of only 65 km/h. The locomotive now lettered as 111 002, belonging to Leipziger Dampf KulTour LDK, was delivered to the then Czechoslovakia in 1981. The massive horizontal pilot fitted with a warning livery below the buffer beam reveals that the locomotive does not originate from Deutsche Reichsbahn stock. LDK uses the 111, which always gleams as if brand new, in shunting service, or hires it out for engineering train duties. The version derived from the V100.3 for the DR and industrial railways in the GDR was designated V100.4. Although the locomotives carried ballast weights instead of a steam heating boiler, the orange four-axle machines could also be observed on passenger trains during the summer. As the transmission of the 111 did not fully prove itself in heavy shunting service, only 37 examples were built for the DR, with a further six for GDR industry. Nine locomotives equipped with a single-sided gangway bridge and power take-off flange worked the so-called ditch-clearing units GRE. The fluid reversing gearbox, better suited to the demands of shunting service, was tested from 1978 in two Class 110 locomotives. It did not enter series production until 1991 with Class 108, which, following the unification of the two German state railways, was subsequently designated Class 298. After the last V100 locomotives were withdrawn from Deutsche Bahn AG in the 2010s, a considerable number passed to private railway operators and heritage railways.
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
Removable roof held in place by magnets (Caution: Do not lift the model by the roof!)
- 2-rail, direct current
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed