Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

SwitchPilot and servos

Filter products
Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material
ESU 51805
Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material

Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit ESU proudly presents a further, newly-developed servo motor for all ambitious model railway fans. The „Precision Servo Motor - Metal“ is preferred by all model railroaders who look for a powerful servo with metal gearing. Thanks to its metal gearing the servo is able to lift nearly twice the load (1.8 kg) of its plastic gearing brother. Moreover, the „Precision Servo Motor - Metal“ is appropriate for all situations in which splicing and beating claim high mechanical requirements from the servo and where the sound development does not play such an important role. With the same measurements as the Precision Servo Motor, the metal gearing is also equipped with the new, micro-processed control electronics for a precise, sensitive heading to the required position. Therefore the impuls suppression makes sure that there won´t be any tremors on the layout when you switch it on. The 30cm cables makes easy wiring possible. Also, the „Precision Servo Motor - Metal“ comes with innovative and well-proven accessories such as a servo holder and controlling wires. Art.No. 51805 Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit

Regular price: CHF 23.90

In stock: 5 on the shelf, shipped within 1-3 days

SwitchPilot Extension 4 Relay Outputs Extension for SwitchPilot V1.0
ESU 51801
SwitchPilot Extension 4 Relay Outputs Extension for SwitchPilot V1.0

SwitchPilot Extension, 4 twin-relays (DPDT) output, 2A each, extension for Switch Pilot Family If required, SwitchPilot can be augmented with the SwitchPilot Extension Modul: Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog; the ideal supplement for tricky circuitry. Modes of operation The SwitchPilot Extension Modul only works in conjunction with a SwitchPilot. Plugged in at the side, it gets its electrical power directly from the SwitchPilot. It contains a total of 4 Twin-Relays (2 x DPDT), of which each is dedicated to a pair of transistorized SwitchPilot outputs. The respective relay’s switch position is directly dependent upon the state of this pair of outputs. With the relay’s help, loads can be switched, galvanically separated from the rest of the track (it functions like a k84), or a motorized turnout can be polarized. With the relay’s 1.5 Amp continuous rating, either frogs can be polarized-, or blocks powered signal dependent, or motorized devices, such as (water) pumps may be switched. Especially intricate is the option to control motorized turnouts: Of course the SwitchPilot Extension Module easily handles the necessary motor polarization as well.

Selling price: CHF 37.90 RRP CHF 39.90

In stock: 1 on the shelf, shipped within 1-3 days

SwitchPilot 3 Servo 8-channel DCC/MM OLED RC-Feedback
ESU 51832
SwitchPilot 3 Servo 8-channel DCC/MM OLED RC-Feedback

SwitchPilot 3 Servo, 8x servo decoder, DCC/MM, OLED, with RC-Feedback, updatable SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 servo is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled central. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 servo can be supplied directly from the digital system or an external DC or AC voltage source. The SwitchPilot 3 servo has eight outputs for the control of RC servo drives. In doing so, it can control these drives so precisely that, in addition to switching switches, any other slow movement sequences can be controlled. The SwitchPilot 3 servo has a built-in power-on pulse suppression to eliminate or reduce the system-related "twitching" of RC servos when applying the supply voltage. Furthermore, the power supply to the servo can be interrupted to prevent a "hum" of some inexpensive servos. Each of the eight servos can be operated either in "digital mode" or in the "proportional mode" introduced for the first time with the SwitchPilot 3 servo: In digital mode, the servo can start two end positions "A" and "B", depending on the switching position on the control panel. The position of the two end positions as well as the speed at which thethe servo moves in the desired direction, can be individually set on the SwitchPilot 3 servo. The digital mode is perfect for switching switches or signals that should always remain in a fixed position. In proportional mode, the servo can move and stop in any position within the end positions "A" and B. The servo only runs as long as the control panel sends a command. If you release the button, the servo stops. In this way, a servo can be stopped in any desired position. The servo speed can be adjusted individually. The proportional mode is ideal for (water) cranes or engine shed gates or any other application, for which intermediate positions are also required. For each servo, in addition to the end positions and the rotational speeds, it can be determined whether it should rock up when reaching the final position. Furthermore, the generation of the servo pulse can be influenced to adapt to the different RC servos on the market or the power supply of each servo can be switched off individually. In this way, cheap so-called so-called Analog servos as well as modern digital servos (with microcontroller) optimally controlled. Analogue Operation The SwitchPilot 3 servo can be used as a special feature without a digital control panel: On request, up to 16 buttons can be connected for direct switching of the servos. Set The SwitchPilot 3 servo can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 servo are protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 61.65 RRP CHF 64.90

In stock: 1 on the shelf, shipped within 1-3 days

Servo drive with plastic gear. With microcontroller. 30 cm cable harness. Fixing material.
ESU 51804
Servo drive with plastic gear. With microcontroller. 30 cm cable harness. Fixing material.

Servo Motor, precision mini-servo, micro-controlled with plastic gearing, incl. mounting kit The Precision Servo Motor is a high-performance and noiseless actuator, introduced by ESU, suitable for the SwitchPilot decoders. It uses a highly-developed remote control (RC) technique and is perfectly suited for setting in motion all kinds of scenes on your layout. ESU has put all the experience gained with the previous servo motor into the new Precision version, which is better than other servo products, to offer a solution for all the demands of model railroaders. Applications The most important application regarding the Precision Servo Motor is to throw points. With the help of the Precision Servo Motor you are able to move your model railway switches like the original ones: the switch blade moves slowly and powerfully from one position to another. While doing this the Precision Servo motor works almost noiselessly due to the precision gearing made of long-lasting plastic. It is mere child´s play to motorize railway crossings via the Precision Servo motor and the SwitchPilot Servo. At last you can let the gates down at your keyboard in due time. Furthermore the Servo motor enables you to open and close the doors of your engine shed by remote control. Thanks to its new electronics the ESU Precision Servo Motor moves considerably smoother than other servos, as the ESU product has been optimized for slow motions. Mini servo The most important component of the Precision Servo Motor is a tiny, 9-gram-light mini servo which has been specially developed and optimized for all demands of a model railway layout. Despite its small dimensions of only 26 mm x 13 mm x 24 mm, it reaches a power of up to 1.0 kg/cm. Its cable length of 30cm (almost twice as long as cables of other standard servos on the market) allows for a longer distance between the servo motor and decoder. Beyond that, an electronic processor-controlled servo enables a precise heading for the required position without bucking - very important for garage doors. The closed current requirements of the electronics have been mottled compared to the previous servo motor which preserves the decoder. However, one of the most important improvements of the new Precision Servo Motor has to do with the switching-on: The well-known tremor when switching on the layout, which occurs with a lot of conventional RC-servos, is 100% choked during every operation mode. You will hear absolutely nothing from the servo when switching your layout on, no railway crossing will bounce. To make the application of the Servo motor as easy as possible, we include substantial accessories with delivery, which are especially adjusted to our customers´ needs: among some, diverse control horns, there is a special servo horn for a direct insert of the controlling wire. The controlling wire is, of course, included as well as the mounting screws. The most important accessory is a special servo holder: it enables you to install the Servo Motor either horizontally or vertically - depending on the application. Art.No. 51804 Servo Motor, precision mini-servo, micro-controlled with plastic gearing, incl. mounting kit

Selling price: CHF 17.90 RRP CHF 18.90

On order, shipped within 4-5 days

Linear servo with microcontroller 30cm cable mounting material
ESU 51806
Linear servo with microcontroller 30cm cable mounting material

Linear Servo, movement 4.5 mm, with microcontroller, 30cm wire,with fittings accessories This linear servo with dimensions 26mm x 22.5mm x 10.8mm is primarily intended for installation in electric locomotives in order to subsequently make the pantographs raised and lowered. The mechanics enable very quiet, smooth running and avoid the noise produced by commercially available servos. The servos radius of movement is approx. 4.5 mm. As is usual with ESU servos, the electronics have been optimized for use in model railway systems: the “start-up twitching” has been eliminated, as has the “humming” under load. The servo can be controlled either with LokSound 5 or LokPilot 5 decoders (both decoders generate the required control impulse) or alternatively used at your own discretion on a model railway system to switch switches or gates. In this case we recommend the SwitchPilot Servo for control.

Selling price: CHF 17.90 RRP CHF 18.90

On order, shipped within 4-5 days

SwitchPilot extension adapter set for ABC braking section, 2 pcs. for a total of 4 braking sections
ESU 51808
SwitchPilot extension adapter set for ABC braking section, 2 pcs. for a total of 4 braking sections

SwitchPilot Extension Adapter for ABC brake sections. Set of 2 for 4 brake sections These adaptor boards greatly simplify set-up and wiring of ABC braking sections. They are simply plugged into the terminals of a SwitchPilot Extension. Every adaptor board can generate the signals for two braking sectors and are wired as shown in the picture. ABC braking works reliably with all ESU V4 decoders (and others) and facilitates not just a prototypical slow down ahead of a red signal but also allows for triggering functions while waiting for the signal aspect to change. Any sound effects are also maintained.

Selling price: CHF 15.90 RRP CHF 16.90

On order, shipped within 4-5 days

SwitchPilot adapter set for signals with a common cathode, 2 pcs, with a total of 8 outputs. Cathode
ESU 51809
SwitchPilot adapter set for signals with a common cathode, 2 pcs, with a total of 8 outputs. Cathode

SwitchPilot Adapter for Signals with common cathode. Set of 2 for 8 Outputs Our SwitchPilot decoders cannot only control point mechanisms but also daylight signals. Most modern signals are equipped with LEDs. Usually the anode connections of multi-aspect signals are combined in order to reduce the number of wires. Some manufacturers (e.g.: Viessmann®) combine the cathodes and for that reason these signals could not be controlled with the SwitchPilot in the past. Our new adapter provides the solution. Simply plug the adapter into the output terminals of the SwitchPilot and you are ready to go.

Selling price: CHF 15.90 RRP CHF 16.90

On order, shipped within 4-5 days

3-pin servo extension cable with JR/Futaba plug to socket, 75 cm length
ESU 51810
3-pin servo extension cable with JR/Futaba plug to socket, 75 cm length

Servo Extension Cable, 3-pole J/R plug on socket J/R / Futaba, Length: 75cm With the Servo Extension Cable you are able to lengthen your Precision Servo Motor by up to 75cm. Art.No. 51810 Servo Extension Cable, 3-pole J/R plug on socket J/R / Futaba, Length: 75cm

Selling price: CHF 4.80 RRP CHF 4.90

On order, shipped within 4-5 days

SwitchPilot 3 4-fold DCC/MM OLED RC-Feedback
ESU 51830
SwitchPilot 3 4-fold DCC/MM OLED RC-Feedback

SwitchPilot 3, 4x accessory decoder, DCC/MM, OLED, with RC-Feedback, updatable SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 46.90 RRP CHF 49.90

On order, shipped within 4-5 days

SwitchPilot 3 Plus 8-fold DCC/MM OLED
ESU 51831
SwitchPilot 3 Plus 8-fold DCC/MM OLED

SwitchPilot 3 Plus, 8x accessory decoder, DCC/MM, OLED, updatable SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 75.90 RRP CHF 82.90

On order, shipped within 4-5 days

SwitchPilot 3 Mini 1-fold solenoid accessory decoder DCC/MM OLED updateable RETAIL packaged
ESU 51834
SwitchPilot 3 Mini 1-fold solenoid accessory decoder DCC/MM OLED updateable RETAIL packaged

SwitchPilot 3 Mini, 1x accessory decoder, DCC/MM, OLED, updatable The compact SwitchPilot 3 Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control a double-coil turnout motor, two magnetic uncouplers, a two-aspect signal, two incandescent bulbs, or other stationary loads. The SwitchPilot 3 Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons. Operating Modes The SwitchPilot 3 Mini is multi-protocol compatible and can be used with command stations based on the Märklin® Motorola® system (e.g., 6021, Central Station®, or Mobile Station®) as well as DCC-compatible control units. Configuration can be performed on either the main track or the programming track. Functions The SwitchPilot 3 Mini can be powered either directly from the digital system or from an external DC or AC power source. It has a total of two transistor outputs. The outputs (OutA and OutB) can be individually configured for the desired application: In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output switches off automatically once the time stored in the decoder has elapsed prevents solenoid drives from burning out. In momentary mode (K83-compatible), the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for accessories with limit switches or for uncoupling tracks. In bistable continuous mode (K84-compatible), the two outputs are switched on and off alternately: Pressing the first button (red) on the control panel switches on output Out A. It remains active until the corresponding button (green) activates output Out B. Out A and Out B behave like a changeover switch. In alternating flashing mode, outputs Out A and Out B are switched on alternately at an adjustable flashing frequency. The alternating flasher is started with the "Straight/Green" command of the assigned button and stopped with the "Round/Red" command. Optionally, the output can also be slowly faded in and out (so-called "zoom" for incandescent bulb simulation). Setup The SwitchPilot 3 Mini can be flexibly set up either on the programming track with DCC command stations or on the main track with POM ("Programming on Main"). It can also learn addresses directly via a programming button. The easiest way to set it up, however, is with the integrated OLED display and the three input buttons: All settings can be checked and changed directly on the decoder. "Programming" using your command station is not required. It really couldn't be simpler. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Mini are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 30.90 RRP CHF 32.90

On order, lead time to be confirmed

SwitchPilot 3 Servo Mini 1-fold servo decoder DCC/MM OLED updateable RETAIL packaged
ESU 51835
SwitchPilot 3 Servo Mini 1-fold servo decoder DCC/MM OLED updateable RETAIL packaged

SwitchPilot 3 Servo Mini, 1x servo decoder, DCC/MM, OLED, updatable The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons. Operating Modes The SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with command stations based on the Märklin® Motorola® system (e.g., 6021, Central Station®, or Mobile Station®) as well as DCC-compatible control units. Configuration can be performed on both the main track and the programming track. Functions The SwitchPilot 3 Servo Mini can be powered either directly from the command station or from an external DC or AC power source. It has an RC servo output. It can control these drives so precisely that, in addition to switching turnouts, it can also control any other slow-moving sequences. The SwitchPilot 3 Servo Mini features built-in power-on pulse suppression to eliminate or reduce the inherent "jerking" of RC servos when power is applied. Furthermore, the power supply to the servo can be disabled to prevent the "humming" sound of some inexpensive servos. The servo can be operated in either "digital mode" or "proportional mode." In digital mode, the servo can move to two end positions, "A" and "B," depending on the switch position on the control panel. The position of these two end positions, as well as the speed at which the servo moves in the desired direction, can be individually adjusted on the SwitchPilot 3 Servo Mini. Digital mode is ideal for switching turnouts or signals that need to remain in a fixed position. In proportional mode, the servo can move to any position within the end positions "A" and "B" and can also stop. The servo only runs as long as the control panel sends a command. Releasing the button stops the servo. This allows you to stop a servo in any desired position. The servo speed can be individually adjusted. Proportional mode is ideal for (water) cranes, locomotive shed doors, or any other application that requires intermediate positions. For each servo, in addition to the end positions and rotation speeds, you can specify whether it should bounce after reaching the end position. Furthermore, to adapt to the various RC servos available on the market, the generation of the servo pulse can be adjusted. This allows for optimal control of inexpensive analog servos as well as modern digital servos (with microcontrollers). Analog Operation The SwitchPilot 3 Servo Mini can be used without a digital command station as a special feature: Two pushbuttons can be added as needed to control the servos directly. Setup The SwitchPilot 3 Servo Mini can be flexibly set up either on the programming track with DCC control units or on the main track with POM ("Programming on Main"). It can also learn addresses directly via a programming button. The easiest way to set it up, however, is with the integrated OLED display and the three input buttons: All settings can be checked and changed directly on the decoder. "Programming" via your control unit is not required. It really couldn't be simpler. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Servo Mini are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 26.90 RRP CHF 28.90

On order, lead time to be confirmed

SwitchPilot signal decoder with 16 independent function outputs, push/pull, removable terminals
ESU 51840
SwitchPilot signal decoder with 16 independent function outputs, push/pull, removable terminals

SignalPilot, accessory decoder with 16 outputs Push/Pull, Removable screw terminals The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull output stages, both daylight signals with common anode as well as daylight signals with a common earth connection (common cathode) are suitable, as is the case with Viessmann® signals. Motorised semaphore signals and turnout drives can also be operated with the SignalPilot. Operating modes The SignalPilot supports both DCC with RailComPlus® and Motorola®. Programming allows for each output to be assigned to any address or to a combination of addresses. Functionality The SignalPilot can be powered either directly by the digital command station or by any transformer /power supply unit providing DC or AC. The SignalPilot has 16 transistor outputs in push-pull configuration. Each output can be operated individually as continuous light, flashing light or pulse light. Here, the brightness or flashing frequency can be adjusted as well as fade-in and fade-out times. Various prototypical lighting effects such as soft dimming, fluorescent tube effect, defective fluorescent tube, gas lantern simulation, flicker light ensure a realistic result. Randomly controlled switching on/off as well as an on/off delay can also be activated. A night service extension can dim down the outputs together if so desired. The outputs of the SignalPilot are combined into signal aspects during configuration. In principle, two-, three-, four- or multiaspect signals are conceivable. Depending on the number of outputs involved, one or more turnout numbers (accessory addresses) are assigned to each signal, with the help of which you can later switch the individual signal aspects. Up to 16 turnout numbers are available for this purpose. The configuration of the signal aspects is carried out exclusively with the aid of the ESU LokProgrammer software. You select the desired signal aspects, then write them to the decoder and finally wire the signals as configured. All signal aspects predefined in the LokProgrammer software can be changed individually. The description of the signal aspects themselves is done with the help of XML files, which on the one hand are regularly extended by ESU or can be created and extended by you at your own discretion. In this way, „exotic” signals can also be supported. The SignalPilot is multi-protocol capable and can be used with digital command stations operating the Märklin® Motorola® system (e.g.: 6021, Central Station® or Mobile Station®) as well as DCC enabled command stations. The configuration can be doen by Programming on the Main (POM) and on the programming track. Thanks to RailCom®, CVs can also be read out. Optionally, a SwitchPilot Extension relay module can be docked to the SignalPilot. This facilitates setting up brake chapters or turnout frog polarisation. LokProgrammer The easiest method of configuring the SignalPilot is programming it with the ESU LokProgrammer. Simply choose the desired signal type, and the wiring will be displayed on the screen. Designed with future developments in mind The firmware of the SignalPilot can be updated with the aid of the LokProgrammer at any time. This may be necessary whenever we add new signal types. Art.No. Delivery 51840 SignalPilot, accessory decoder with 16 outputs Push/Pull, Removable screw terminals

Selling price: CHF 75.90 RRP CHF 82.90

On order, shipped within 4-5 days