Buildings, scenery and Car System
Faller, your layout's scenery in kit form
RhB stations, Engadine houses, towns, factories and farms to build yourself, in H0 (1:87) and N (1:160), with trees, scatter material and lighting. And the Car System: vehicles that drive themselves along your roads.
- 2014items in the shop
- 1946the year it was founded
- Since 1988the Car System

What Faller brings to your layout
- Switzerland in kit form: RhB stations at Ardez, Lavin and Stugl-Stuls, the Zernez signal box, Engadine houses in H0; the Landwasser Viaduct and Litzirüti station in N.
- Buildings and scenery: stations, houses, factories and farms in plastic or laser-cut, with trees, wall sheets, scatter material and LED lighting.
- The Car System: every vehicle has its own motor and battery. A magnet on the front axle follows a steel wire set into the road; stops at traffic lights, level crossings and halts, and junctions. In H0 and N.
- In the Black Forest since 1946: founded by the brothers Hermann and Edwin Faller, the company moved to Gütenbach the same year and still produces in the Black Forest.
The Faller families
For your H0 layout (1:87)
31 itemsSwitzerland H0RhB stations at Ardez, Lavin and Stugl-Stuls, Engadine houses, Swiss signs and figures.See the items
783 itemsBuildings H0Stations, houses, factories, farms and fairgrounds.See the items
136 itemsScenic details H0Lighting, fences, street furniture and small details.See the itemsFor your N layout (1:160)
8 itemsSwitzerland NLandwasser and Val Tuoi viaducts, Susch, Lavin and Litzirüti stations.See the items
254 itemsBuildings NStations, engine sheds, town houses and farms.See the itemsCar System, terrain and vegetation
All Faller items
Classic red clinker-built lodge. Multiple uses in the railway sector and for gatekeepers.
On order, shipped within 4-5 days
Two-story federal railway administration building in clinker construction, outside wall, bike stand with bikes and floor plate with parking areas.
On order, lead time to be confirmed
consisting of administration with workshop and the connected shed with doors movable by hand to shelter a railcar, 135 mm length over buffers. Typical accessories are included like overhead wiring signals, masts, cable drums, lines, and pipes. The gantry crane and the working platforms with work devices and ladder are included (not rollable). Direct rail connection is possible.
On order, shipped within 4-5 days
Flowing electricity. 3 different sizes of transformer stations with brick construction and different roof shapes update your power network.
On order, lead time to be confirmed
Rural tower substation with small square base and wood siding at the gable, plain tile roof and lateral insulators to connect the aerial wires. Two pylons also form part of the kit.
On order, shipped within 4-5 days
Buildings along the Arosa Railway. Laser-cut model of the goods shed at “Langwies” station with a stone base, irregular gabled roof and characteristic decorative boards along the verge. The side walls of the model are largely made of real wood. Fits perfectly with Langwies station, item no. 190055. This kit contains: 72 individual parts in 4 colours, window film and 1 set of assembly instructions. Use FALLER EXPERT laser-cut adhesive for assembly.
On order, shipped within 4-5 days
Building labour barracks with tarred cardboard roof as can be seen on various building sites, also used in small scale antiquated enterprises in the 50s. Several models can be juxtaposed.
On order, shipped within 4-5 days
Large volume side rooms of the shed made of wood, in which various coal types or other bulk goods material can be stored. Ideal for the railway-related small trade branch or in-harbour handling. A bag with coal is included.
On order, shipped within 4-5 days
Two cylindrical large capacity tower silos for storing and handling bulk goods. Pipes carry the goods. Accessible via outside ladder and walkway with railing.
On order, shipped within 4-5 days
A relic of energy supply. Substation housed in a tower with a plain tile roof, rod insulators and their hook-shaped brackets. Grey rendering with a chipping part.
On order, shipped within 4-5 days
Perfect current supply! Set comprised of three small masonry transformer substations of different size.
On order, shipped within 4-5 days
Large coal shed constructed of wood with movable gates to the railway side and a mono-pitched roof. The front sides of the storage building are flanked by a roofed outdoor storage area and an office annex, which is entered via a small terrace. A fence, wheelbarrows and sack barrows, barrels, sacks and coal are included for scene design.
On order, lead time to be confirmed
Along the railway line. Set including an engine driver waiting shelter with pavilion roof, and two trackside shanties with wooden board facing and lean-to roofs.
On order, shipped within 4-5 days
The brick model switch tower impresses with its stone-faced plaster façade, which gives it a robust character. A covered external staircase leads up to the entrance and the gabled roof with red stone slabs gives the building a classic touch. Inside, all electronics are well protected and safely stowed away - a reliable place for controlling and monitoring technical processes in miniature format.
On order, shipped within 4-5 days
To shed your engines. Three-stall extensible roundhouse apt to be linked to turntables with an angle of outgoing tracks of 12°. Supporting steel structure and exposed masonry of that brick house are of contrasting colours. Lateral walls each feature seven windows, while each stall is fitted with three windows in the back wall, vent, skylight and chimney cope. Driving parts and articulated wire for the gates to be moved through a servo are included (Servo, Art. 180726 available separately). Shed for engines with a length over buffers of 290 mm. Clearance of gates/lower edge of the track line: 72 mm. Model suitable for all common track systems. Extensible with »Supplementary set for Roundhouse with 12° track angle«, Art. 120282. For a half-circle roundhouse you need: 1 x Art. 120281, 6 x Art. 120282.
On order, shipped within 4-5 days
For the large engine shed. Two-stall extension element without lateral walls for »Roundhouse with 12° track angle«, Art. 120281. Each stall is fitted with three windows in the back wall, vent, skylight and chimney cope. Driving parts and articulated wire for the gates to be moved through a servo are included (Servo, Art. 180726 available separately). Shed for engines with a length over buffers of 290 mm. Clearance of gates/lower edge of the track line: 72 mm. Model suitable for all common track systems. For a half-circle roundhouse you need: 1 x Art. 120281, 6 x Art. 120282.
On order, shipped within 4-5 days
Quick mounting in building construction! Tower slewing crane serving as a handling and lifting aid on building sites and plots, comprised of mounting unit with swivelling sustainers and counterweight, hinged tower, and swinging boom.
On order, shipped within 4-5 days
1-storey roundhouse in half-timbered construction with light-coloured beams and yellow clinker infill. The roundhouse has room for locomotives up to 230 mm LoB.
On order, shipped within 4-5 days
Intermodal. Blue bridge-crane model for the handling of containers between the carriers rail, road and sea, similar to the original operated by DSD HILGERS Stahlbau GmbH in goods traffic centre GVZ in the Bavarian port of Nuremberg. Expandable to be a functioning model using the »Drive kit for Container bridge-crane«, Art. 180290. »Track extension for Container bridge-crane«, Art. 180291 available separately.
On order, shipped within 4-5 days
Inspired by the gantry crane of the Meiderich steelworks, which will celebrate its 100th anniversary in 2025, this model brings a piece of heavy industry to the layout. The design allows construction in four lengths - from 528 to 798 mm - and makes the crane versatile. Ideal for industrial sites to create an authentic atmosphere.
On order, lead time to be confirmed
Final service on the steam locomotive. Handling facility with pit, inclined skip hoist and drive parts for the up and down movement of the slag truck. Servo, Art. 180726 and Servo control, Art. 180725 sold separately.
On order, shipped within 4-5 days
Shaft made of steel and glass with movable lift allowing to represent a ground-level elevator access to a platform or a flat roof. The driving parts for the elevator (threaded rod, nuts, ball bearings) are supplied with the kit. »Drive unit«, Art. 180692 suitable for the lift, comprised of motor, automatic cutoff through limit stops, and manual reversing switch, available separately.
On order, shipped within 4-5 days
190 Pieces, 140 with digital printing.
On order, shipped within 4-5 days
Small but nice! The sky-blue waiting shelter with a charming wooden façade is ideal as a decoration for your model railway. It also perfectly complements Oberstenfeld station and as a small detail, the model embellishes any railway scenery.
On order, shipped within 4-5 days


