Buildings, scenery and Car System
Faller, your layout's scenery in kit form
RhB stations, Engadine houses, towns, factories and farms to build yourself, in H0 (1:87) and N (1:160), with trees, scatter material and lighting. And the Car System: vehicles that drive themselves along your roads.
- 2014items in the shop
- 1946the year it was founded
- Since 1988the Car System

What Faller brings to your layout
- Switzerland in kit form: RhB stations at Ardez, Lavin and Stugl-Stuls, the Zernez signal box, Engadine houses in H0; the Landwasser Viaduct and Litzirüti station in N.
- Buildings and scenery: stations, houses, factories and farms in plastic or laser-cut, with trees, wall sheets, scatter material and LED lighting.
- The Car System: every vehicle has its own motor and battery. A magnet on the front axle follows a steel wire set into the road; stops at traffic lights, level crossings and halts, and junctions. In H0 and N.
- In the Black Forest since 1946: founded by the brothers Hermann and Edwin Faller, the company moved to Gütenbach the same year and still produces in the Black Forest.
The Faller families
For your H0 layout (1:87)
31 itemsSwitzerland H0RhB stations at Ardez, Lavin and Stugl-Stuls, Engadine houses, Swiss signs and figures.See the items
783 itemsBuildings H0Stations, houses, factories, farms and fairgrounds.See the items
136 itemsScenic details H0Lighting, fences, street furniture and small details.See the itemsFor your N layout (1:160)
8 itemsSwitzerland NLandwasser and Val Tuoi viaducts, Susch, Lavin and Litzirüti stations.See the items
254 itemsBuildings NStations, engine sheds, town houses and farms.See the itemsCar System, terrain and vegetation
All Faller items
The extremely economical beginner’s package with the major functional elements allowing to build Car System installations.
On order, shipped within 4-5 days
Vehicle’s Technical Details Powerful, wear-resistant motor Solid rubber tires Vehicle comes with integrated battery Multiple hours of run-time per battery charge Integrated charging jack Use chargers (art. 161349 or art. 161690) Please note: Only use original FALLER products for constructing roads to ensure safe operation Detailed vehicle manual You can purchase spare parts at speciality retailers or directly from FALLER. For further information see www.faller.de
On order, shipped within 4-5 days
"Nearly every traffic situation can be simulated. Whether you want to plan a bus stop, diagonal parking lot, work zone, right-hand or left-hand traffic. The vehicle will stop by itself. Along with 8 inputs and 8 outputs, a total of 15 control programs can be selected via microswitches. Rotary control knobs allow to adjust different periods of time. Comprehensive instructions for use with plenty of examples of connections and control sequences are supplied. 16 V alternating voltage
On order, lead time to be confirmed
This Traffic Light Control allows you to pilot every kind of traffic light installed on Car System layouts. Power supply through FALLER Transformer (art. 180699). With detailed instructions for use. Functions: - up to 4 traffic lights can be connected (12 LEDs) - the length of time of the different lights can partly be programmed at will - up to 16 different LEDs (of 20 mA each) can be connected without having to use a surge protector - running lights possible with up to 8 lamps
On order, lead time to be confirmed
Prepared for connection to the Traffic Light Control (item no. 161654).
On order, shipped within 4-5 days
Interacting with scenarios on the spot. Module composed of 2 relays (12 V DC) on small PCB that allows to trigger various actions on the model layout by plugging some wire straps (also called jumpers). - Connected to the »Traffic-Control«, Art. 161651 or the »Extension module«, Art. 161352 the module can switch on and off e.g. a smoke generator, Art. 180690 or a modeller’s synchronous motor, Art. 180629 (alternating current). - Connected to an »Extension module« one of the outputs can actuate a motor in forward motion, while the other output will actuate the motor in reverse motion, by plugging the wire straps accordingly. - It is also possible for the module to link various digital systems potential-free: one of the systems switches the relay on and that signal will be processed in another system. - By plugging the wire straps accordingly, two signals can be generated out of one signal: since a normally closed contact and a normally open contact of the relay are used, either one contact or the other will be closed depending on whether the relay has pulled up or is open. By suitably connecting the relay module it is also possible to reverse a signal. - By connecting the relay module in series, it is possible to switch higher current values or even other voltages (e.g. an alternating voltage) on modules the outputs of which are too weak for the required current. Further possible uses are described in the instruction manual supplied.
On order, shipped within 4-5 days
The speed trap is equipped with a very bright LED and is prepared for connection with a series resistor for 12-16 V DC. The flashing light is triggered when the built-in sensor (Art. 161773, not included) is passed over. A flashing light box for H0 or N can be built.
On order, shipped within 4-5 days
Advantageous combination. The set contains all parts required to build a personalized functioning lane width neutral bus stop. Along with a control unit suitable for a bus stop (16 V alternating current) there are 1 Stop section, 1 Branch-off junction, 2 Sensors, 1 additional magnet (H0/N), 5 m of Special contact wire, 1 mounting template (H0/N) as well as detailed instructions within the set.
On order, shipped within 4-5 days
This groove cutter was developed and made especially for laying the contact wire in the FALLER Car System. Detailed instructions enclosed.
On order, shipped within 4-5 days
10 m. Diameter and alloy adapted for use with steering magnet.
On order, shipped within 4-5 days
Parking space for the permanent stopping of vehicles in car parks. The vehicle is reactivated by means of the magnetic field of the electric coil. Connection: 16 V, AC voltage. Current draw 330 mA.
On order, lead time to be confirmed
The accumulator voltage is interrupted via a reed switch in the vehicle by means of the magnetic field of the electric coil. Connection: 22 V, DC voltage, 160 mA.
On order, shipped within 4-5 days
Whenever it is activated the magnetism of the branch-off junction steers a vehicle onto a second turning-off guide wire. This occurs via the magnet fastened to the steering slider built into the vehicles.
On order, shipped within 4-5 days
Suitable for charging all accumulators built into Car System vehicles.
On order, lead time to be confirmed
Sensors are designed for the control of stop points, branch-off junctions, etc. They are activated by additional magnets fitted to the bottom of vehicles. Connection to Traffic-Control (art. 161651). Max. switching power 5 W Max. switched current 200 mA
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or independent operation. The most current international signal sequences can be triggered via the inputs of the box: one regulator each for country setting and duration. Possible signal lights: -green/yellow/red -green/yellow/red/red-yellow -green/green blinking/yellow/red/red-yellow.
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them to the control unit »Traffic Light Control« art. 161654 they help represent the international signal sequence with three states (green/yellow/red). By connecting them to an »Extension module« art. 161352 they help represent the international signal sequences with three states (green/yellow/red), four states (green/yellow/red/yellow-red) or five states (green/green blinking/yellow/red/red-yellow).
On order, shipped within 4-5 days
Two traffic lights with LED light signals in the colours green, yellow and red without control. Equally suitable for Car System, Car System Digital or stand-alone operation. The construction site traffic lights are ready for connection for: 12-16 V AC/DC. Height: 32 mm. We recommend the control units: 161654, 161352, 161345.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
Roads and control technique in the advantageous set. This set allows to build a 2-lane H0 oval using Laser Street elements inclusive of a functioning bus stop. Along with a control unit suitable for a bus stop (16 V alternating current) there are the required Laser Street elements (H0), 1 Stop section, 1 Branch-off junction, 2 Sensors, 1 additional magnet (H0), 5 m of Special contact wire as well as detailed instructions within the set.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days


