Buildings H0
This half-timbered building has an outside staircase and interior details on the second floor.
On order, shipped within 4-5 days
Brickwork construction, slating and half-timbered construction in the upper region of the signal tower.
On order, shipped within 4-5 days
A structure spanning two tracks. Catenary operation is possible.
On order, shipped within 4-5 days
Timber construction as it is sometimes still used at small railway stations.
On order, shipped within 4-5 days
Bw-set consisting of movable loading crane, two heatable, hinged water standpipe cranes with flexible end flanges and water outlets, as well as small-scale coal handling with coal trams and stationary, movable crane. The modelling kit contains drive components for all three motors, as well as a servo. Simultaneous operation of the models possible with the addition of a servo.
On order, shipped within 4-5 days
This small, rotating loading crane can be installed wherever goods must be handled. Without raising or lowering function.
On order, shipped within 4-5 days
Gatekeeper’s lodge with shed attached on one side and board cladding of the top storey.
On order, lead time to be confirmed
With manually movable loading crane and tender. For small service areas.
On order, shipped within 4-5 days
The advertising signs and the magazines are included in the construction kit.
On order, shipped within 4-5 days
The construction kit contains a compressor house with attachments and accessories, a stationary pipe-blasting frame and a coal rake rack with the respective hand apparatus for cleaning and removing slag from the steam engine. Every depot facility has a compressor house for the supply of the compressed-air ductwork system. The engine repair shed, the sanding tower and the pipe-blasting frame among others are fed with compressed air from here. From time to time the flues and fireboxes of the locomotive have to be thoroughly cleaned by blasting with the tubular extension pole.
On order, shipped within 4-5 days
Tools for the maintenance of road beds are stored in them.
On order, shipped within 4-5 days
A beautiful old water tower with spherical container and filigree steel girder construction. Shack as entrance to the pumping station, well cover and vent pipes are included. Constructed in 1908, the prototype with its 500 m³ container stands at Haltingen near the Swiss border.
On order, shipped within 4-5 days
A model set for the steam depot. Sanding tower with high-level tank (like art. 120138), sand house with slidable roof for loading and a bag of »sand« for realistic decoration.
On order, shipped within 4-5 days
In the old style with manually pivoting crane and two coal tubs (German: »Hunten«).
On order, shipped within 4-5 days
Prototypical coaling facility complete with concrete blockhouse, two coal conveyors (170 mm each), gantry crane and a bag of »coal« as realistic decor. The crane cabin and boom can be turned by 360° with the FALLER motor (art. 180629, not included). The crane can be manually moved along the 340 mm mock track. The design of the concrete blockhouse complies with the Deutsche Bahn uniform concrete blockhouse. The gantry crane is also sold separately (art. 120162).
On order, shipped within 4-5 days
Kit includes a gantry crane, 2 heated swivel water spouts (DB NW 200), 2 slag hoppers, 1 ground plate (344 mm) with slag pit, rolling slag carriage, and bucket. Above the slag pit the ground plate is provided with two driving rails. It can be connected to all types of tracks, even those with middle conductor, except Märklin’s C track. Combining two inspection pits (120136) allows to build a two-track deslagging plant with a parallel track distance of 67 mm, matching that of the bunker (120148). Such an installation allows the gantry crane to span 3 tracks – 2 slag pits and 1 track for slag wagons.
On order, shipped within 4-5 days
Store shed with built-on loading crane and canopy. To be used on railway premises or, e.g., as a repair materials store.
On order, shipped within 4-5 days
Freight shed in wood construction style with mounted loading ramps on both sides, sliding gates and roof lights.
On order, lead time to be confirmed
Space for vehicles up to 250 mm length over buffers. The chimney of the workshop outbuilding is ready for using a smoke generator (Seuthe no. 7). A particularly important feature of this model is the pass-through option, as both end walls feature large doors. The modular construction allows for variable configurations. Multiple buildings may also be constructed side by side.
On order, shipped within 4-5 days
The large gantry crane fits in all areas in which cranes are used: ports, industry, railways etc. The crane can be equipped with a load hook, spade lug or logging tongs. With the FALLER motor (art. 180629, not included) the driver’s cabin can be turned 360° with the arm. The crane can be manually moved on the 340 mm long track dummy. The crane is identical to the crane in coaling station kit (art. 120148).
On order, shipped within 4-5 days
The ideal derrick for loading and unloading work in the harbour, in the railway area, in the industrial branch etc. The top part of the crane can be rotated manually by 360° (engine cannot be retrofitted). The crane bridge can be manually moved on the included rail mock-up. The crane is optionally equipped with a single crane hook, a heavy double hook, gripper shovel or wood grippers. The package also contains a coal bunker, in which various coal types and other bulk materials can be stored. This way, a beautiful scene can be built.
On order, shipped within 4-5 days
This very typical railway model can not only be used in depots, but wherever something has to be lifted and loaded. A gantry crane can be built with the parts of this construction kit which spans over two or three tracks.
On order, shipped within 4-5 days
Bricks-and-mortar-built, with 2 shelters for locomotives up to 270 mm length over buffer. Gates feature springs which automatically shut them again after an engine has passed through. Catenary operation possible.
On order, shipped within 4-5 days
Water tower from Bielefeld with masonry entrance area, clinker tower and spherical water holder. Such water towers are not only used in the service area, but also for the water supply of towns.
On order, shipped within 4-5 days