Car System
Upgrade: »Car System Digital Master« from now on with DCC output, too. The »Car System Digital Master« also allows from now on to address the most varied DCC compatible devices, such as e.g. servo, points or signal decoders. To use the new functionality simply assign in the Car System Digital software a digital address you have previously programmed in your DCC compatible device. Radio basic unit! The »Car System Digital Master« permits communication between all required components and controls all functions. A radio transmitter and receiver module ensures communication with the satellites and the vehicles, respectively. The »Car System Digital Master« is provided with the following interfaces: USB interface for connection to a PC LocoNet port to connect any other LocoNet components, such as e.g. the extension module, Art. 161352 DCC input to connect any DCC capable digital control unit DCC output to connect DCC compatible devices Output to provide up to 6 satellites with rectified supply voltage Independent supply voltage of the Master with 16 V AC High-efficiency aerial for radio link between digital vehicles, satellites and Radio expansion modules, Art. 161345 Please note: The »Car System Digital Master« does not provide any primary supply voltage for connected decoders, and exclusively supports the DCC specification according to standard sheet. The »Car System Digital Master« includes software licence type »Basic version« allowing the operation of two digital vehicles. All devices are radio-based two-way short-range transmission systems, which are regulated under European standard sheet EN 300-220-1 (2). Published under: ETSI EN 300 220-2 V2.1.1. Frequency spectrum includes bands 868 to 870 MHz.
On order, shipped within 4-5 days
The beginner’s set, without the vehicle, provides all components that are necessary for getting started with fully automated operation of the Car System Digital. In addition to the 3 satellites, the Car System Digital Master, as well as the software necessary for the controls, are included in the set. The software is Windows compatible from Version XP SP2. In addition to a totally realistic road load, a fully comprehensible distance control of the vehicles is also possible! Playful fun is guaranteed. The »Car System Digital Master« is provided with the following interfaces: - USB interface for connection to a PC - LocoNet port to connect any other LocoNet components, such as e.g. the extension module, Art. 161352 - DCC input to connect any DCC capable digital control unit - DCC output to connect DCC compatible devices - Output to provide up to 6 satellites with rectified supply voltage - Independent supply voltage of the Master with 16 V AC - High-efficiency aerial for radio link between digital vehicles, satellites and Radio expansion modules, Art. 161345
On order, shipped within 4-5 days
Compact! Car System Digital satellite with small enclosure, ideal even under confined space conditions, such as e.g. in shadow areas that are not accessible on your installation.
On order, lead time to be confirmed
Big technology in a small space - convert now and get started! Our new, ultra-compact conversion kit with integrated 5 x 5 mm ultrasonic capsule makes the digitalisation of Car System vehicles easier than ever before. Thanks to its minimal size, it is perfect for retrofitting even particularly small vehicle models - ideal for individual conversions and creative projects. With just one circuit board, any analogue model can be turned into a fully-fledged digital vehicle - equipped with: Ultrasonic localisation for precise vehicle tracking Fully automatic distance control Dynamic speed adjustment in play mode The circuit board also features solder pads for additional lighting and sound functions - perfect for experienced hobbyists who want to get the most out of their model. Small. Powerful. Future-proof.
On order, lead time to be confirmed
System sound! Loudspeaker for retrofitting conversion vehicles in conjunction with »Analog-Digital Conversion Kit«, Art. 163701.
On order, shipped within 4-5 days
Modular cable, RJ12 plug to RJ12 plug, 6 wires, all assigned, 1:1, length: 0.5 m. Connection cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular extension, RJ12 plug to RJ12 socket, 6 wires, all assigned, 1:1, length: 2 m. Extension cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular junction/adapter, 1 x RJ12 socket on 2 x RJ12 socket, 6P6C, all assigned, 1:1. Adapter/junction to connect to all common LocoNet cables.
On order, lead time to be confirmed
FALLER Car System USB charger with the following features: - Can be used worldwide – USB A from 1.1 with 500mA power handling capacity. - Suitable for all FALLER Car System vehicles – any generation and gauge (except FALLER Car System Digital) - Suitable for all original FALLER Car System batteries – installed battery type is automatically detected and the charging current is adjusted accordingly. - Automatic shutdown – switches off after a certain amount of time and when charging end voltage has been reached. - LED signals for status and error messages. Technical data: - Input side: connection type: USB A ('male'), voltage: 5 V, current max: 0.5A - Output: voltage max: 2.4 V, current max: 0.5 A
On order, shipped within 4-5 days
In fresh green and white, the VW ID. Buzz rolls along the streets of the model railway and brings modern momentum to the world of miniatures. With its charming retro design and clear, contemporary design language, it combines past and future in a special way. Whether outside a café, on country roads or in city traffic - the little electric van causes a stir wherever it goes and adds a touch of adventure and freedom to the scene.
On order, lead time to be confirmed
The future meets modelling - the Volkswagen ID Buzz brings modern design and electromobility to your layout. Realised true to detail and unmistakable in appearance, this model is a highlight of any contemporary scenery.
On order, shipped within 4-5 days
The InterRegio bus is back - as a detailed model of Deutsche Bahn's legendary long-distance bus experiment. A piece of transport history from the late 80s for your layout.
On order, shipped within 4-5 days
The C-Class W 203 - now as an authentic model for your system! Experience the style and elegance of the 2000s in miniature form.
On order, lead time to be confirmed
With this Mercedes-Benz taxi in the typical yellow look, the miniature inhabitants of your layout can get from place to place without any problems. It is ideal for scenes in city traffic or in front of the railway station and brings additional life to your layout.
On order, shipped within 4-5 days
A deep blue THW Sprinter with flashing blue lights drives along the miniature road, ready for its next mission. This model brings momentum and dynamism to the layout and was designed to mark the 75th anniversary of the THW.
On order, shipped within 4-5 days
A beige-coloured VW T5 with a classic taxi look chauffeurs the inhabitants of the miniature world from place to place. This model brings some movement to the layout with its typical design and complements the cityscape perfectly!
On order, shipped within 4-5 days
A grey-blue VW T5 in the classic police look races through the city layout to its next mission. This model brings some movement to the layout with its typical design and complements the cityscape perfectly!
On order, shipped within 4-5 days
A deep blue THW Sprinter drives along the miniature road, ready for its next mission. This model brings momentum and dynamism to the layout and complements it perfectly!
On order, shipped within 4-5 days
In cooperation with the Herpa Miniaturmodelle GmbH.
On order, shipped within 4-5 days
»Heavy-duty« Mercedes Benz. Model year of the original: 1994. The SK series was produced between 1989 and 1998 and was then replaced by the Actros. The model is printed with a biodiesel motif.
On order, lead time to be confirmed
Vehicle’s technical details: - Powerful, wear-resistant motor - Solid rubber tires - Vehicle comes with integrated battery - Multiple hours of run-time per battery charge - Integrated charging jack - Chargers (available separately): »Car System USB charger«, Art. 161415, »Processor-controlled charging unit«, Art. 161349 or »Storage battery charger«, Art. 161690 Please note: - Only use original FALLER products for constructing roads to ensure safe operation. - You can purchase spare parts at speciality retailers or directly from FALLER.
On order, lead time to be confirmed
Vehicle’s technical details: - Powerful, wear-resistant motor - Solid rubber tires - Vehicle comes with integrated battery - Multiple hours of run-time per battery charge - Integrated charging jack - Chargers (available separately): »Car System USB charger«, Art. 161415, »Processor-controlled charging unit«, Art. 161349 or »Storage battery charger«, Art. 161690 Please note: - Only use original FALLER products for constructing roads to ensure safe operation. - You can purchase spare parts at speciality retailers or directly from FALLER.
On order, shipped within 4-5 days
Now beer is also being delivered! In a modern Mercedes Actros with lift axle and box body in the design of the »Veltins« brewery. Technical vehicle details: - Microswitch for on/off - Powerful, wear-resistant drive motor - Solid rubber tyres for safe grip - Steerable oscillating axle with slider and magnet - Integrated NiMh battery - 3-pin charging socket - Reed contact - Possible chargers (available separately): »Storage battery charger«, Art. 161690, »Car System USB charger«, Art. 161415 or »Processor-controlled charging unit«, Art. 161349 Please note: - Only use original FALLER materials for road construction to ensure safe operation. - Spare parts are available from specialised dealers or directly from FALLER.
On order, shipped within 4-5 days
It cuts a clean figure! In a classic and authentic vehicle design, here as a new colour variant. Vehicle type can be used regularly up to Era IV. Technical vehicle details: - Microswitch for on/off - Powerful, wear-resistant drive motor - Solid rubber tyres for safe grip - Steerable oscillating axle with slider and magnet - Integrated NiMh battery - 3-pin charging socket - Reed contact - Possible chargers (available separately): »Storage battery charger«, Art. 161690, »Car System USB charger«, Art. 161415 or »Processor-controlled charging unit«, Art. 161349 Please note: - Only use original FALLER materials for road construction to ensure safe operation. - Spare parts are available from specialised dealers or directly from FALLER.
On order, shipped within 4-5 days