Car System
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
With these parts which are easily to processed by interlinking street parts that already contain the groove for the guide wire, different single and double lane streets can be built.
On order, shipped within 4-5 days
This set of 4 consists of tyres and matching rims and is ideal as a spare or replacement part for Golf and C-Class models. The precisely fitting components ensure a realistic look, stable road holding and improved driving behaviour for your model.
On order, lead time to be confirmed
1 x for item no. 161573, 162005, 162006 and 162931. 2 x for item no. 161303, 161304, 161305, 161516, 161536, 161549, 161552, 161560, 161561, 161577 and 161578.
On order, shipped within 4-5 days
Modification part
On order, shipped within 4-5 days
Modification part
On order, shipped within 4-5 days
Modification part
On order, lead time to be confirmed
Modification part
On order, lead time to be confirmed
Modification part
On order, lead time to be confirmed
Modification part
On order, shipped within 4-5 days
Printed circuit board allowing to retrofit various analog Car System vehicle models for digital operation with ultrasonic locating, fully automatic distance control and modifications of the driving speed while playing. Moreover all soldering pads required for additional lighting and equipment with sound functions are provided on the board. Experienced modellers will thus be able to convert any analog Car System vehicle to an integrally Car System Digital model.
On order, shipped within 4-5 days
Make the stationary vehicle model of your choice fit for Car System. Chassis kit to motorize stationary models of buses and trucks for Car System operation. Set contains all vehicle components required for the assembly of a fully functioning two-axle Car System H0 chassis (bus and truck), except the rechargeable batteries: support PCB, motor with worm, motor holder with worm wheel and driving axle, driving wheels, front axle with wheels, steering rod with magnet, front axle holder, switch, charging socket, dry-reed sensor, resistors to adjust the charging current and driving speed. Conversion info: - Axle base can be selected continuously between 38 mm and 88 mm - Width: 29 mm - Support PCB with all electrical connections required for easy soldering of components, incl. soldering pads for warning beacons - Fastening of motor and gear unit at choice horizontal (e.g. in buses and trucks with dropped frame) or vertical (e.g. in semitrailer trucks) - Built-in HERPA standard crossmember can be removed when using any bodywork of other manufacturers
On order, shipped within 4-5 days
Make the stationary model of any van of your choice fit for Car System. Chassis kit allowing the motorization of van stationary models for Car System operation. Set contains all the vehicle components required to build a fully functioning Car System H0 chassis, with the exception of the rechargeable batteries: support PCB, motor with endless screw, motor holder with worm gear and driving axle, driving wheels, front axle with wheels, steering rod with magnet, front axle holder, switch, charging socket, dry-reed sensor, resistors to adjust the charging current. Infos on conversion: - Axle bases can be selected continuously between 28 mm and 54 mm - Width: 21,5 mm - Support PCB with all electrical connections required for easy soldering of components, incl. soldering pads for rotating beacons (RKL)
On order, shipped within 4-5 days
Make the stationary vehicle model of your choice fit for Car System. Chassis kit to motorize stationary models of N buses and N trucks for Car System operation. Set contains all vehicle components required for the assembly of a fully functioning two- or three-axle Car System N gauge chassis (bus and truck), except the rechargeable batteries: Motor with worm, Motor holder with worm wheel and driving axle, Driving wheels, Front axle with wheels, Steering rod with magnet, Front axle holder, Switch, Charging socket, Dry-reed sensor, Resistors to adjust the charging current. Conversion info: - Fastening of motor in gear unit at choice horizontal (e.g. in buses and trucks with dropped frame) or vertical (e.g. in semitrailer trucks) - Axle bases (horizontal motor) can be selected continuously between 25 mm and 43 mm - Axle bases (vertical motor) can be selected continuously between 20 mm and 40 mm - Width: approx. 16 mm
On order, lead time to be confirmed
Compact electronic circuit using an input voltage in the range of 0.8 to 3.3 V to generate a constant 3.3 V output voltage. Module allows to operate e.g. LEDs in Car System vehicles running on one rechargeable battery cell (1.2 V) only. Its outputs are fitted with suitable protective resistors so that SMD LEDs Art. 163750, Art. 163751, Art. 163752, and Art. 163753 can directly be connected.
On order, shipped within 4-5 days
Eye-catcher! Light-emitting diodes with built-in microcircuit, to be used wherever a flashing lamp is required, e. g. as a visual signal on stationary models of vehicles (police, rescue service, fire brigade, construction industry, municipal companies, or agriculture), during gate opening and shutting movements, for the illumination of funfair models, and many others more. Supply voltage: 3-4 V DC Current input: up to 20 mA Flashing rate: approx. 1.5 Hz International component size: 0805 Length: 2 mm Width: 1.25 mm Height: 1.1 mm Advice: For lighting effects on Car System vehicles, use the Flashing lights, Art. 163760 to 163765.
On order, shipped within 4-5 days
5 SMD reflector LEDs with powerful directional luminosity that like head lights does not radiate towards the interior of the vehicle. Suitable e.g. for the lighting of funfair kits, the equipment of vehicles with lights and many others more. SMD LEDs are characterized by their weak generation of heat and long service life. PAS format: 0603, corresponds to 1.6 x 0.8 mm. Operate LEDs only with the stated low voltage.
On order, shipped within 4-5 days
5 SMD reflector LEDs with powerful directional luminosity that like head lights does not radiate towards the interior of the vehicle. Suitable e.g. for the lighting of funfair kits, the equipment of vehicles with lights and many others more. SMD LEDs are characterized by their weak generation of heat and long service life. PAS format: 0603, corresponds to 1.6 x 0.8 mm. Operate LEDs only with the stated low voltage.
On order, shipped within 4-5 days
5 SMD reflector LEDs with powerful directional luminosity that like head lights does not radiate towards the interior of the vehicle. Suitable e.g. for the lighting of funfair kits, the equipment of vehicles with lights and many others more. SMD LEDs are characterized by their weak generation of heat and long service life. PAS format: 0603, corresponds to 1.6 x 0.8 mm. Operate LEDs only with the stated low voltage.
On order, shipped within 4-5 days