Model railways in N scale
Fleischmann, SBB and BLS in N scale
SBB Re 460, Re 4/4 II and Re 6/6, BLS Re 465, EW IV coaches, wagons, track and spare parts: Fleischmann runs a Swiss layout at 1:160, with the rest of Europe alongside.
- 647items in the shop
- 1:160for your N layout
- Since 1887a brand born in Nuremberg

What Fleischmann brings to your layout
- Swiss railways: Re 460, Re 4/4 II, Re 6/6 and Re 620 of SBB and SBB Cargo, BLS Re 465, EW IV coaches of SBB and SOB, silo, stake and container wagons.
- Detail at 1:160: die-cast metal chassis on the Re 460, photo-etched wipers on the Re 6/6 and Re 4/4 II, fine pantographs, bogies with yaw dampers on the EW IV coaches.
- Analogue or with sound: many locomotives come in two versions: DC, or with an on-board decoder, sound, lights and cab lighting switchable in digital mode.
- A brand from Nuremberg: founded in 1887 by Jean Fleischmann, the brand now belongs to the same group as Roco and is devoted to N scale.
The Fleischmann families
For a Swiss layout
45 itemsSwiss locomotivesRe 460, Re 4/4 II, Re 6/6 and Ae 6/6 of SBB and SBB Cargo, BLS Re 465 and a Beilhack rotary snowplough.See the items
19 itemsSwiss coaches and wagonsEW IV coaches of SBB and SOB, silo, stake and container wagons.See the itemsAll rolling stock
196 itemsLocomotivesSteam, diesel and electric locomotives from Switzerland, Germany, Austria and France, DC or with sound.See the items
64 itemsPassenger coachesEW IV, ICE and Flixtrain coaches, coaches of the DB, DR and SNCF.See the items
108 itemsGoods wagonsPocket, container, tank, covered and RoLa wagons, from Switzerland and Europe.See the itemsTrack and spare parts
All Fleischmann items
Traction tyre set H0. Outer diameter 9.3 mm, width 1.5 mm. 10 pcs/pack. Suitable for loco class 36 (AC). Corresponds to the spare part number 54401400.
In stock: 2 on the shelf, shipped within 1-3 days
Pair of round brushes with springs.
In stock: 2 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of the Austrian Federal Railways (Rail Cargo Wagon). New design 2025! Wagon made from die-cast metal Carries tank containers from the company TWS Tankcontainer-Leasing Four movable snap locks per trough The "T3000e" Megatrailer pocket wagon is a further development of the "T2000" class. Its loading space is designed to accommodate the low-lying vehicle parts of the Megatrailer. Additionally, it can also load trailers from previous designs, swap bodies and containers up to a length of 7.82 m.
In stock: 2 on the shelf, shipped within 1-3 days
High capacity sliding wall wagon type Habbiins of the Deutsche Bahn. Finely-detailed design With separately attached handle rails
In stock: 2 on the shelf, shipped within 1-3 days
Pressurised gas tank wagon, type Zags, operated by the Deutsche Bundesbahn. Version without sunroof
In stock: 2 on the shelf, shipped within 1-3 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical specification, see the spec sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
In stock: 2 on the shelf, shipped within 1-3 days
Steam locomotive 055 635 of the Deutsche Bundesbahn. Presented as a heavy shunting locomotive Die-cast metal chassis The Prussian Class G 8.1, of which almost 5,000 units were built, had a power output of 1,260 hp and reached a top speed of 55 km/h. The locomotive was mainly used in goods trains and for heavy shunting services.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 460 of the Swiss Federal Railways. Original version with "2000" on the front Die-cast metal chassis Closed front apron attached to the package Perfectly matches the EW-IV coaches - items 890326-890329 To implement the concept “Bahn 2000”, the SBB procured twenty-four Re 460 locomotives. A bit later, they had seventy-five more locomotives built to ensure a smooth operation, on the in 1994 introduced piggyback corridor running through Switzerland. The locomotives were later assigned to the passenger transport. Until today they are indispensable when it comes to the traction of the dense Swiss regular traffic.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 460 of the Swiss Federal Railways. Original version with "2000" on the front Die-cast metal chassis Closed front apron attached to the package Authentic light and sound functions switchable via onboard decoder In digital mode with switchable driver's cab lighting Perfectly matches the EW-IV coaches - items 890326-890329 To implement the concept “Bahn 2000”, the SBB procured twenty-four Re 460 locomotives. A bit later, they had seventy-five more locomotives built to ensure a smooth operation, on the in 1994 introduced piggyback corridor running through Switzerland. The locomotives were later assigned to the passenger transport. Until today they are indispensable when it comes to the traction of the dense Swiss regular traffic.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 460 073 of the Swiss Federal Railways. Baptised with the name “Monte Ceneri” The model is equipped with the delicate Faiveley-type pantographs Metal die-cast chassis Closed front apron included The SBB procured 24 locomotives from this series for the realisation of the “Bahn 2000” concept. A further series totalling 75 locomotives was constructed in order to guarantee the Huckepack-Korridor service set up from 1.1.1994 through Switzerland. These locomotives were later allocated to passenger service during the course of divisionalisation. They remain essential for traction of the highly-frequent Swiss fixed-interval transport today.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 465 009 of the Swiss railway company BLS. Livery in refit design Closed front apron included Up until 2022, the 18 BLS locomotives type Re 465 were modernised and received a new livery. In order to facilitate use with Vectron and Traxx locomotives in freight transport, the appropriate multiple-unit controls were installed. Furthermore, an Ethernet Train Backbone has been implemented for traction of the Autotunnel and future GoldenPass trains. The names with which these locomotives were labelled are no longer used. The work was carried out at the company’s own factory in Bönigen.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 460 073 of the Swiss Federal Railways. Baptised with the name “Monte Ceneri” The model is equipped with the delicate Faiveley-type pantographs Metal die-cast chassis Closed front apron included Prototypical light and sound functions, switchable using on-board decoder Driver’s cab lighting, can be switched in digital mode The SBB procured 24 locomotives from this series for the realisation of the “Bahn 2000” concept. A further series totalling 75 locomotives was constructed in order to guarantee the Huckepack-Korridor service set up from 1.1.1994 through Switzerland. These locomotives were later allocated to passenger service during the course of divisionalisation. They remain essential for traction of the highly-frequent Swiss fixed-interval transport today.
In stock: 2 on the shelf, shipped within 1-3 days
The set consists of three 20' tank containers that can be used on your model railway layout for combined traffic operations. New design 2019
In stock: 2 on the shelf, shipped within 1-3 days
Straight power feed track 2 poles, length 111 mm with interference suppressor. The suppressor is concealed inside the lineside hut. Not suitable for use with digital operation.
In stock: 2 on the shelf, shipped within 1-3 days
The switching impulse (max. 800 mA) is activated by the passage of the magnets 942601 or 942701.
In stock: 2 on the shelf, shipped within 1-3 days
Point motors can be clipped onto the three-way point and switched as a "thinking" point. The two curved exits correspond to the track 9136 (15°).
In stock: 2 on the shelf, shipped within 1-3 days
Crossover 15°, right hand crossing, length 111 mm. The crossing tracks are isolated from each other so that two independent power circuits can cross each other. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm.
In stock: 2 on the shelf, shipped within 1-3 days
Left hand curved point for manual operation, with current-conducting frog. Adaptable with electric point motor. To change from radius R1 to radius R2 and viceversa, 45°.
In stock: 2 on the shelf, shipped within 1-3 days
Right hand curved point for manual operation, with current-conducting frog. Adaptable with electric point motor. To change from radius R1 to radius R2 and viceversa, 45°.
In stock: 2 on the shelf, shipped within 1-3 days
Right hand curved point for manual operation. Adaptable with electric point motor. To change from radius R1 to radius R2 and viceversa, 45°.
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand for manual operation, with current-conducting frog. Length 111 mm (standard length), branch angle 15°, branch radius 430 mm. Adaptable for electric turnout drive. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm. The current-conducting frog On several points, the current-conducting frog ensures good electrical contact when running through frog area of the points. These points cannot be "slipped" through whilst set in the wrong direction, otherwise this can cause a short circuit. Therefore, the points must always be set in the right direction.The polarisation of the frog, in other words, the changing from "positive" to "negative", which is essential as the points are set, is carried out automatically when setting the point.
In stock: 2 on the shelf, shipped within 1-3 days
Turnout right hand for manual operation, with current-conducting frog. Length 111 mm (standard length), branch angle 15°, branch radius 430 mm. Adaptable for electric turnout drive. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm. The current-conducting frog On several points, the current-conducting frog ensures good electrical contact when running through frog area of the points. These points cannot be "slipped" through whilst set in the wrong direction, otherwise this can cause a short circuit. Therefore, the points must always be set in the right direction.The polarisation of the frog, in other words, the changing from "positive" to "negative", which is essential as the points are set, is carried out automatically when setting the point.
In stock: 2 on the shelf, shipped within 1-3 days
Double slip for manual operation, left hand crossing, 15°. Adaptable for electric point motor. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm. As delivered, all track exits deliver power into one circuit. By removing the wire bridge clips the crossing tracks become electrically isolated from each other. On the ”crossover“ setting, another track circuit can be traversed. On the ”branch-off“ setting, the current is separated at the centre of the slip.
In stock: 2 on the shelf, shipped within 1-3 days
Double slip for manual operation, right hand crossing, 15°. Adaptable for electric point motor. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm. As delivered, all track exits deliver power into one circuit. By removing the wire bridge clips the crossing tracks become electrically isolated from each other. On the ”crossover“ setting, another track circuit can be traversed. On the ”branch-off“ setting, the current is separated at the centre of the slip.
In stock: 2 on the shelf, shipped within 1-3 days

