CarMotion road beds
Straight road bed element for installing the magnetic tape (1 mm) of the Car-Motion system. It serves as the base/centre piece for one- or two-lane straight road sections. The set contains 36 centre pieces each measuring 1.35 × 20 cm, for a total length of 7.2 metres.
On order
Flexible road bed element for installing the magnetic tape (1 mm) of the Car-Motion system. It serves as a flexible base for straight and curved, one- or two-lane road sections. The set contains 36 flexible centre pieces each measuring 1.35 × 20 cm, for a total length of 7.2 metres.
On order
Transition segment used to change the spacing between the guide magnetic strips. For curves with a radius of less than 20 cm, it is used together with the FLEXI transition element HCT9403T and the FLEXI segments 2.85 cm HCT9402F to increase the magnetic strip spacing to 1 cm. At the end of the curve, the same element is used again to return to the standard spacing of 4 cm on straight sections.
On order
Central element of the road bed for installing the magnetic strip of the Car-Motion system, for straight two-lane road sections. Contains 14 central elements, each 3.7 × 20 cm, total length 2.8 metres.
On order
Flexible central element of the road bed for installing the magnetic strip of the Car-Motion system, for curved two-lane road sections. Contains 14 FLEXI central elements, each 3.7 × 20 cm, total length 2.8 metres.
On order
Side element of the road bed for installing the magnetic strip of the Car-Motion system, used as the outer part of the road. Contains 18 side elements, each 2.85 × 20 cm, total length 3.6 metres.
On order
Flexible side element of the road bed for installing the magnetic strip of the Car-Motion system, used as the outer part of curved road sections. Contains 18 FLEXI side elements, each 2.85 × 20 cm, total length 3.6 metres.
On order
Transition segment for curves with a radius of less than 20 cm: this FLEXI transition element is used before continuing the track with FLEXI segments 2.85 cm (HCT9402F). This increases the spacing of the guide magnetic strips to 1 cm, allowing even longer vehicles and buses to pass each other safely in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm for the guide magnetic strips on straight sections.
On order
Straight road bed element for installing the magnetic strip, 1 mm thick. Base for creating straight single or double lane road sections. Includes 26 side parts of the road bed, each 1.85 × 20 cm, total length 5.2 metres.
On order
Flexi element road bed for installing the magnetic strip, 1 mm. Base for the flexible creation of single- or two-lane road sections (straight and curved). Contains 26 FLEXI side parts of the road bed, each 1.85 × 20 cm, total length 5.2 metres.
On order
Transition segment. For curves with a radius of less than 20 cm, the FLEXI transition element HCT9403T is used and the track is continued with FLEXI segments 2.85 cm HCT9402F, which increases the spacing of the guide magnetic strips to 1 cm, allowing longer vehicles and buses to safely pass each other in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm of the guide magnetic strips on straight tracks.
On order
Straight element road bed for installing the magnetic strip, 1 mm. Base for creating straight single- or two-lane road sections. Contains 16 road bed elements, each 3.35 × 20 cm, total length 3.2 metres.
On order
Flexi element road bed for installing the magnetic strip, 1 mm. Used as the centre part for curved two-lane road sections. Contains 16 FLEXI centre parts of the road bed, each 3.35 × 20 cm, total length 3.2 metres.
On order
Transition segment. For curves with a radius of less than 20 cm, the FLEXI transition element HCT9404T is used and the track is continued with FLEXI segments 3.35 cm HCT9404F, which increases the spacing of the guide magnetic strips to 1.5 cm, allowing longer vehicles and buses to safely pass each other in curves. At the end of the curve, the same transition element is used again to return to the standard spacing of 4 cm of the guide magnetic strips on straight tracks.
On order
I-Track road bed plate for the T-crossing 90° two-lane in the CarMotion system, made of 1 mm thick material for gluing. With pre-cut grooves for the 3×1 mm magnetic tape (V8430) and openings for the Viessmann mechanical turnouts (V8448 or V8445). Contains 2 pieces, L 29.7 × B 21 cm.
On order
I-Track road bed plate for the CarMotion system, with factory pre-cut grooves for the 3×1 mm magnetic tape (item no. V8430) and pre-cut openings for mounting the mechanical Viessmann switches (item no. V8448 or V8445). The plate is glued directly onto the base, for example with classic wood glue or Hacker's industrial CA super glue. Contains 2 pieces, L 22.5 x W 21 cm.
On order
Asphalt road plate for a 60° crossing to the right. Contains 2 pieces.
On order
Road bedding plate made of a special 1 mm thick material, glued directly onto the base (with classic wood glue or Hacker's industrial CA super glue). The grooves are precisely pre-cut at the factory for the 3×1 mm magnetic tape (item no. V8430); the crossing plates additionally feature pre-cut openings for mounting the Viessmann mechanical turnouts (item no. V8448 or V8445), which only require a 35 mm hole to be drilled before being fixed underneath the base plate with the I-Track holder W (item no. HCT8408W).
On order
Asphalt road plate for the 60° left crossing, supplied as a set of 2 pieces.
On order
Road bedding plate made of a special 1 mm thick material, glued directly onto the base (with classic wood glue or Hacker's industrial CA super glue). The grooves are precisely pre-cut at the factory for the 3×1 mm magnetic tape (item no. V8430); the crossing plates additionally feature pre-cut openings for mounting the Viessmann mechanical turnouts (item no. V8448 or V8445), which only require a 35 mm hole to be drilled before being fixed underneath the base plate with the I-Track holder W (item no. HCT8408W).
On order
Asphalt road plate for the T 90° V2 crossing, supplied as a set of 2 pieces.
On order
Road bedding plate made of a special 1 mm thick material, glued directly onto the base (with classic wood glue or Hacker's industrial CA super glue). The grooves are precisely pre-cut at the factory for the 3×1 mm magnetic tape (item no. V8430); the crossing plates additionally feature pre-cut openings for mounting the Viessmann mechanical turnouts (item no. V8448 or V8445), which only require a 35 mm hole to be drilled before being fixed underneath the base plate with the I-Track holder W (item no. HCT8408W).
On order
Contains 2 pieces.
On order
Contains 2 pieces.
On order