CarMotion segments and modules
Practical mounting ring for under-baseplate installation of the Viessmann V8408 CarMotion inductive charger (L). It is simply screwed to the underside of the base plate, so the charger sits flush with the top of the plate and is fixed at the desired height with a single screw. If needed, loosening three screws allows immediate removal without damaging the road surface.
On order
Practical bracket for under-baseplate installation of the Viessmann V8448 / V8445 CarMotion road branch (W). It is simply screwed to the underside of the base plate, so the unit sits flush with the top of the plate and is fixed at the desired height with a single screw. If needed, loosening three screws allows immediate removal without damaging the road surface.
On order
Includes I-Track components: substructures, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, ramps, embankments and signal boxes, designed for H0 ROCO Line, with detailed assembly instructions and video. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
Suitable for Fleischmann / MiniTrix N track. Includes I-Track components: frame, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, access ramps, embankments as well as holders for tablet and switch, with detailed assembly instructions and a list of all required tracks and parts. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
Includes I-Track components: substructures, base plates, base plates with hidden storage yard, two-track Rondela helix, track beds, ramps, embankments and signal boxes, designed for H0 Märklin C and TRIX H0, with detailed assembly instructions and video. Track, buildings, trains and electronics are not included but can be ordered according to the enclosed list.
On order
I-Track segments for building raised roads, bridges and smooth height transitions in the CarMotion system, made of high-quality plywood, supplied as a kit and glued with Hacker CA super glue or wood glue, without sawing or sanding. Contains 4 entry segments 11×10 cm.
On order
This high-quality plywood segment kit contains 4 straight connecting segments 11 x 12 cm for building elevated roads in the CarMotion system. The parts are glued together without sawing or sanding, using cyanoacrylate or wood glue, and their height and gradient can be adjusted with I-Track support posts.
On order
This high-quality plywood segment kit contains 4 transition segments (incline/level) 11 x 12 cm for smooth height transitions in the CarMotion system. The parts are glued together without sawing or sanding, using cyanoacrylate or wood glue, and their height and gradient can be adjusted with I-Track support posts.
On order
This high-quality plywood segment kit contains 4 transition segments 11 x 12 cm for smooth height transitions in the CarMotion system. The parts are glued together without sawing or sanding, using cyanoacrylate or wood glue, and their height and gradient can be adjusted with I-Track support posts.
On order
This high-quality plywood segment kit contains 4 connecting segments A 11 × 10 cm for building elevated roads in the CarMotion system. The parts are glued together without sawing or sanding, using cyanoacrylate or wood glue, and their height and gradient can be adjusted with I-Track support posts.
On order
This high-quality plywood segment kit contains 4 connecting segments U 11 × 10 cm for building elevated roads in the CarMotion system. The parts are glued together without sawing or sanding, using cyanoacrylate or wood glue, and their height and gradient can be adjusted with I-Track support posts.
On order
I-Track segments are designed for easily building elevated roads, bridges and smooth grade transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit and can simply be glued together without sawing or sanding. This set contains 6 straight segments 11 × 10 cm.
On order
I-Track segments are designed for easily building elevated roads, bridges and smooth grade transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit and can simply be glued together without sawing or sanding. This set contains 4 straight segments 11 × 15 cm.
On order
I-Track segments are designed for easily building elevated roads, bridges and smooth grade transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit and can simply be glued together without sawing or sanding. This set contains 2 straight segments 11 × 25 cm.
On order
I-Track segments are designed for easily building elevated roads, bridges and smooth grade transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit and can simply be glued together without sawing or sanding. This set contains 2 straight segments 11 × 50 cm.
On order
I-Track segments are designed for easily building elevated roads, bridges and smooth grade transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit and can simply be glued together without sawing or sanding. This set contains 6 segments with a 30° curve.
On order
Contains 6 segments for the 45° curve. I-Track segments allow easy construction of elevated roads, bridges and smooth height transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit, can be glued without sawing or sanding using cyanoacrylate or wood glue, and the curved segments can be built left or right handed; height and incline are set using I-Track supports.
On order
Contains 6 segments for the 60° curve. I-Track segments allow easy construction of elevated roads, bridges and smooth height transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit, can be glued without sawing or sanding using cyanoacrylate or wood glue, and the curved segments can be built left or right handed; height and incline are set using I-Track supports.
On order
Contains 4 segments for the 90° curve. I-Track segments allow easy construction of elevated roads, bridges and smooth height transitions in the CarMotion system. They are made of high-quality plywood, supplied as a kit, can be glued without sawing or sanding using cyanoacrylate or wood glue, and the curved segments can be built left or right handed; height and incline are set using I-Track supports.
On order
Mounting supports for building roads from I-Track CarMotion segments are available in lengths from 27 to 197 mm (No. 1–18, 12 pieces each) in 10 mm steps; a complete set, item no. HCT9452-20, with all lengths in 2 pieces each, is also available. This set contains 12 supports with a length of 27 mm for precise adjustment of incline and height in the CarMotion system.
On order
Mounting supports for building roads from I-Track CarMotion segments are available in lengths from 27 to 197 mm (No. 1–18, 12 pieces each) in 10 mm steps; a complete set, item no. HCT9452-20, with all lengths in 2 pieces each, is also available. This set contains 12 supports with a length of 37 mm for precise adjustment of incline and height in the CarMotion system.
On order
Includes 12 mounting supports with a length of 47 mm for building roads from I-Track CarMotion segments. The supports allow precise adjustment of incline and height, as well as easy assembly on the base plate.
On order
Includes 12 mounting supports with a length of 57 mm for building roads from I-Track CarMotion segments. The supports allow precise adjustment of incline and height, as well as easy assembly on the base plate.
On order
Includes 12 mounting supports with a length of 67 mm for building roads from I-Track CarMotion segments. The supports allow precise adjustment of incline and height, as well as easy assembly on the base plate.
On order