H0 track formation segments
I-Track segments are trackbed construction elements made of high quality, laser cut plywood that let you bridge any terrain shape and change levels. Thanks to the included modular supports, the gradient or incline can be adjusted individually, and the construction with two girders makes the segments especially rigid and load bearing. They are supplied as a kit with illustrated assembly instructions and are compatible with all common track systems (Roco, Tillig, Fleischmann, PIKO, TRIX, Märklin, Peco, etc.).
On order
I-Track segments are trackbed construction elements made of high quality, laser cut plywood that let you bridge any terrain shape and change levels. Thanks to the included modular supports, the gradient or incline can be adjusted individually, and the construction with two girders makes the segments especially rigid and load bearing. They are supplied as a kit with illustrated assembly instructions and are compatible with all common track systems (Roco, Tillig, Fleischmann, PIKO, TRIX, Märklin, Peco, etc.).
On order
I-Track segments are laser-cut plywood trackbed elements that let you easily bridge gradients, descents and level changes. Thanks to their special construction with two sub-beams, they are stiff, flex-resistant and load-bearing. They are supplied as a kit with an illustrated assembly guide.
On order
I-Track segments are laser-cut plywood trackbed elements that let you easily bridge gradients, descents and level changes. Thanks to their special construction with two sub-beams, they are stiff, flex-resistant and load-bearing. They are supplied as a kit with an illustrated assembly guide.
On order
I-Track segments are laser-cut plywood trackbed elements that let you easily bridge gradients, descents and level changes. Thanks to their special construction with two sub-beams, they are stiff, flex-resistant and load-bearing. They are supplied as a kit with an illustrated assembly guide.
On order
I-Track segments are laser-cut plywood trackbed elements that let you easily bridge gradients, descents and level changes. Thanks to their special construction with two sub-beams, they are stiff, flex-resistant and load-bearing. They are supplied as a kit with an illustrated assembly guide.
On order
The upper transition segment is arch-shaped and creates a smooth transition between the gradient or descent and the upper level, without a troublesome kink in the track run. Screws are included in the set, supplied as a kit with an illustrated assembly guide.
On order
The I-Track transition segments create a smooth transition between an incline/decline and a level track section, including when connecting to an existing layout. The lower segment compensates for the height difference, while the upper segment is curved to avoid an unsightly kink in the track. Screws and an illustrated assembly guide are included.
On order
The I-Track transition segments create a smooth transition between an incline/decline and a level track section, including when connecting to an existing layout. The lower segment compensates for the height difference, while the upper segment is curved to avoid an unsightly kink in the track. Screws and an illustrated assembly guide are included.
On order
The I-Track transition segments create a smooth transition between an incline/decline and a level track section, including when connecting to an existing layout. The lower segment compensates for the height difference, while the upper segment is curved to avoid an unsightly kink in the track. Screws and an illustrated assembly guide are included.
On order
Reducer for I-Track segments 141.5x115 mm. It is designed to connect segments with identical couplings (internal or external).
On order
Reducer for I-Track segments 141.5x115 mm. It is designed to connect segments with identical couplings (internal or external). H0 straight 2-track segment 141.5x115 mm, 6 pieces.
On order
Reducer for I-Track segments 80x115mm. It is designed to connect segments with identical couplings (internal or external).
On order
Reducer for I-Track segments 80x115mm. It is designed to connect segments with identical couplings (internal or external).
On order
I-Track segments are trackbed construction elements that let you bridge any terrain shape and change levels on your layout. The supplied modular supports allow you to adjust the gradient or incline to your needs. The segments are laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order
I-Track segments are trackbed construction elements that let you bridge any terrain shape and change levels on your layout. The supplied modular supports allow you to adjust the gradient or incline to your needs. The segments are laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order
The I-Track transition segments create a smooth transition between the gradient (or slope) and a level section of track. The lower transition segment compensates for the height difference between the lower level and the first segment of a gradient; its height corresponds to the height difference of the S1 supports. It is supplied as a kit with screws and illustrated assembly instructions.
On order
The lower transition segment compensates for the height difference between the lower level and the first segment of a gradient, matching the height difference of support S1. Screws are included; supplied as a kit with illustrated assembly instructions.
On order
I-Track segments are the perfect trackbed elements. With them you can bridge any terrain and change the levels of your layout very easily. With the modular supports supplied, you can adjust the gradient or downgrade exactly as you wish. This makes it child's play to build entrances to and exits from a fiddle yard. Our I-Track segments are also ideally suited to open-frame construction. Thanks to their special construction with two longitudinal beams, the segments are very rigid, resistant to bending and load-bearing. The segments are available in 1-track and 2-track versions, as straights and for curves. These are each available in different lengths and radii, all of which can be combined with one another. Used as a track helix, the segments let you achieve large height differences in the smallest of spaces. See our Rondela system for this. The I-Track segments are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. The I-Track system can be used with all common track systems (Roco, Tillig, Fleischmann, PIKO, TRIX, Märklin, Peco, etc.). H0, straight 1-track segment, 80x460mm, 4 pcs.
On order
I-Track segments are the perfect trackbed elements. With them you can bridge any terrain and change the levels of your layout very easily. With the modular supports supplied, you can adjust the gradient or downgrade exactly as you wish. This makes it child's play to build entrances to and exits from a fiddle yard. Our I-Track segments are also ideally suited to open-frame construction. Thanks to their special construction with two longitudinal beams, the segments are very rigid, resistant to bending and load-bearing. The segments are available in 1-track and 2-track versions, as straights and for curves. These are each available in different lengths and radii, all of which can be combined with one another. Used as a track helix, the segments let you achieve large height differences in the smallest of spaces. See our Rondela system for this. The I-Track segments are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. The I-Track system can be used with all common track systems (Roco, Tillig, Fleischmann, PIKO, TRIX, Märklin, Peco, etc.). H0, straight 2-track segment, 141.5x460mm, 4 pcs.
On order
I-Track segments are the perfect trackbed building elements, letting you bridge any terrain and easily change levels on your layout. Thanks to their construction with two support beams, the segments are very rigid, resistant to bending and able to bear heavy loads. They are supplied as a kit made of high quality laser cut plywood with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed building elements, letting you bridge any terrain and easily change levels on your layout. Thanks to their construction with two support beams, the segments are very rigid, resistant to bending and able to bear heavy loads. They are supplied as a kit made of high quality laser cut plywood with an illustrated assembly guide.
On order
I-Track segments are the perfect trackbed building elements, letting you bridge any terrain and easily change levels on your layout. Thanks to computer aided production, everything fits together seamlessly, so no cutting, sanding or drilling is required. The system is compatible with all common track systems (Roco, Tillig, Fleischmann, PIKO, TRIX, Märklin, Peco, etc.).
On order
I-Track segments are ideal trackbed elements for bridging any terrain and changing levels. Thanks to the included modular supports, the gradient or slope can be adjusted as needed, for example for entries and exits to a hidden staging yard. The segments are laser-cut from high-quality plywood and supplied as a kit with an illustrated assembly guide.
On order