Modules and control panels
Mounting kit for fastening starter plates and modules.
On order
The extendable control panels are specially designed for the I-Track base plates in sizes 100x80, 100x90, 120x80, 120x90 and 120x100 cm, and are available in three versions: as a tablet holder (up to 12"), for switches and push buttons, or for switches, push buttons and a Roco/Fleischmann turntable controller. They are supplied as a kit with illustrated assembly instructions and fit directly into the grooves of the base plate; a safety mechanism prevents accidental complete extraction.
On order
The extendable holder is specially designed for the I-Track base plates (100x80, 100x90, 120x80, 120x90, 120x100 cm) and is supplied completely disassembled for easy assembly. Once the side parts are glued, it slides directly into the grooves of the base plate and can be pulled out or pushed back as needed; the front panel is designed for switches, push buttons and a Roco/Fleischmann turntable controller. Gluing is done with standard wood glue or Hacker CA adhesive.
On order
Retractable holder designed for I-Track base plates in sizes 100x80, 100x90, 120x80, 120x90 and 120x100 cm, available as a tablet stand (up to 12"), for switches and pushbuttons, or for switches, pushbuttons and turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, available as a tablet stand (up to 12"), for switches and pushbuttons, or for switches, pushbuttons and Roco/Fleischmann turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, fitted for switches, pushbuttons and Roco/Fleischmann turntable controller. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
Fixed holder allowing comfortable and stable placement of a tablet or smartphone above the tracks of the I-Track system, fitted for switches and pushbuttons. Supplied as a kit with illustrated instructions, to be glued with wood glue or Hacker cyanoacrylate glue.
On order
The base module is a universal foundation for model railway scenery; it can be used on its own or connected sideways to other modules to gradually extend the layout. It is prepared for the installation of height-adjustable legs and fitted with a transparent protective railing that protects the layout edges and the CarMotion system. For transport and storage, two finished modules can simply be folded against each other and fitted with covers.
On order
The base module is a universal foundation for model railway scenery; it can be used on its own or connected sideways to other modules to gradually extend the layout. It is prepared for the installation of height-adjustable legs and fitted with a transparent protective railing that protects the layout edges and the CarMotion system. For transport and storage, two finished modules can simply be folded against each other and fitted with covers.
On order
The base module is a universal platform for designing model railway scenes; it can be used on its own or connected sideways to further modules (M8 screw set, HCT8460S4) and is prepared for height-adjustable legs (82–92 cm, HCT9890AL8, or 110–120 cm, HCT9890AL11). A transparent protective railing secures the layout edges, including the CarMotion system. After operation, two modules can be folded together, fixed with the connecting plates HCT9812T/W and stored dust-protected in the supplied carton.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
Fully assembled starter plate for the I-Track table layout, allowing track to be laid or roads for CarMotion to be built immediately. After operation, the locomotive and wagons are removed and the plate with its tracks stored in the supplied carton, or it can be left on the table using the supplied spacers and the lid, creating 8 cm of clearance above the layout. Several starter plates can be joined together with M8 screws and wing nuts (HCT8460S4) to form a larger modular layout.
On order
After operation, two modules – starter plates with scenery – can simply be folded against each other, connected using the transport plates HCT9812T, fitted with protective covers and then safely stored or transported, protecting the layout from dust and mechanical damage. Included are 2 transport plates measuring 50 x 60 x 0.5 cm plus a set of mounting screws with washers and nuts.
On order
After operation, two modules – starter boards with landscape – can simply be folded against each other, connected using the transport plates, fitted with protective covers and safely stored or transported. This protects the layout from dust and mechanical damage. Contains 2 transport plates 50 × 80 × 0.5 cm as well as a set of mounting screws with washers and nuts.
On order
Contains 10 railings, length 30 cm, for I-Track modules and road construction segments.
On order
The FREMO / Zababov modules are designed for building modular railway layouts with various standardised profile shapes. Supplied ready-made, they are built from special plywood, making them light, rigid and resistant to twisting. They are prepared for height-adjustable legs (82–92 cm, item no. HCT9890AL8, or 110–120 cm, item no. HCT9890AL11), are available in lengths of 400, 600, 800, 1000 and 1200 mm, and are joined using an M8 screw set with wing nuts (item no. HCT8460S4).
On order
The FREMO / Zababov modules are designed for building modular railway layouts with various standardised profile shapes. Supplied ready-made, they are built from special plywood, making them light, rigid and resistant to twisting. They are prepared for height-adjustable legs (82–92 cm, item no. HCT9890AL8, or 110–120 cm, item no. HCT9890AL11), are available in lengths of 400, 600, 800, 1000 and 1200 mm, and are joined using an M8 screw set with wing nuts (item no. HCT8460S4).
On order
The FREMO / Zababov modules are designed for building modular railway layouts with various standardised profile shapes. Supplied ready-made, they are built from special plywood, making them light, rigid and resistant to twisting. They are prepared for height-adjustable legs (82–92 cm, item no. HCT9890AL8, or 110–120 cm, item no. HCT9890AL11), are available in lengths of 400, 600, 800, 1000 and 1200 mm, and are joined using an M8 screw set with wing nuts (item no. HCT8460S4).
On order
AL leg, 3x3x110-120 cm, with adjusting screw, for modules. 1 piece.
On order
AL leg, 3x3x82-92 cm, with adjusting screw, for modules. 1 piece.
On order
Includes 2 transport plates 40 x 50 x 0.5 cm as well as a set of mounting screws with washers and nuts. After operation, two modules with landscape can simply be folded against each other, connected using the transport plates, fitted with protective covers and safely stored or transported. This protects the layout from dust and mechanical damage.
On order