Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rondela helices

Filter products
Railing wire 2 x 960 mm with connector, 5 pieces
I-Track HCT9671
Railing wire 2 x 960 mm with connector, 5 pieces

Railing wire measuring 2 x 960 mm, including connector, 5 pieces per pack.

Regular price: CHF 11.20

On order

Rondela helix 358/419 mm, 360°, 2-track, base circle
I-Track HCT9672DR3
Rondela helix 358/419 mm, 360°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 358/419 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 919 mm

Regular price: CHF 98.80

On order

Rondela helix 358/419 mm, 360°, 2-track, additional circle
I-Track HCT9672DR3A
Rondela helix 358/419 mm, 360°, 2-track, additional circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 358/419 mm, 1- or 2-track, add-on circle, 6 segments = 1 circle, build height: 130 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 919 mm

Regular price: CHF 84.25

On order

Rondela helix 358/419 mm, 540°, 2-track, base circle
I-Track HCT9672DR5
Rondela helix 358/419 mm, 540°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 358/419 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, build height: 190 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 4.18%, outer diameter: 919 mm

Regular price: CHF 126.25

On order

Rondela helix 358 mm, 360°, 1-track, base circle
I-Track HCT9672R3
Rondela helix 358 mm, 360°, 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 358 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 4.89%, outer diameter: 796 mm

Regular price: CHF 88.05

On order

Rondela helix R 358mm, 360°, 1-track, assembly circle
I-Track HCT9672R3A
Rondela helix R 358mm, 360°, 1-track, assembly circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 358 mm, 1-track, add-on circle, 6 segments = 1 circle, build height: 130 mm, segment width: 80 mm, inner gradient: 4.89%, outer diameter: 796 mm

Regular price: CHF 74.15

On order

Rondela helix 358mm, 540°, 1-track, base circle
I-Track HCT9672R5
Rondela helix 358mm, 540°, 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 358 mm, 1-track, base circle, 9 segments = 1 1/2 circles, build height: 190 mm, segment width: 80 mm, inner gradient: 4.89%, outer diameter: 796 mm

Regular price: CHF 112.55

On order

Rondela 419,6/481,2mm, 360°, 2-track, base circle
I-Track HCT9673DR3
Rondela 419,6/481,2mm, 360°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 419.6/481.2 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 109.10

On order

Rondela 419,6/481,2mm, 360°, 2-track, extension circle
I-Track HCT9673DR3A
Rondela 419,6/481,2mm, 360°, 2-track, extension circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 419.6/481.2 mm, 1- or 2-track, add-on circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 96.70

On order

Rondela 419,6/481,2mm, 540°, 2-track, base circle
I-Track HCT9673DR5
Rondela 419,6/481,2mm, 540°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 419.6/481.2 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, build height: 190 mm, segment width: 141.5 mm, inner gradient: 4.89%, outer gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 145.35

On order

Rondela 419,6mm, 360°, 1-track, base circle
I-Track HCT9673R3
Rondela 419,6mm, 360°, 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 419.6 mm, 1-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, outer gradient: 3.64%, outer diameter: 919 mm

Regular price: CHF 94.40

On order

Rondela 419.6 mm, 360°, 1-track, add-on circle
I-Track HCT9673R3A
Rondela 419.6 mm, 360°, 1-track, add-on circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 419.6 mm, 1-track, add-on circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, outer gradient: 3.64%, outer diameter: 919 mm

Regular price: CHF 78.95

On order

Rondela 419.6 mm, 540°, 1-track, base circle
I-Track HCT9673R5
Rondela 419.6 mm, 540°, 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 419.6 mm, 1-track, base circle, 9 segments = 1 1/2 circles, build height: 190 mm, segment width: 80 mm, outer gradient: 3.64%, outer diameter: 919 mm

Regular price: CHF 117.75

On order

Rondela helix 481,2/542,8 mm, 360°, 2-track, base circle
I-Track HCT9674DR3
Rondela helix 481,2/542,8 mm, 360°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 481.2/542.8 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.64%, outer gradient: 3.23%, outer diameter: 1167 mm

Regular price: CHF 110.00

On order

Rondela helix 481,2/542,8 mm, 360°, 2-track, extension circle
I-Track HCT9674DR3A
Rondela helix 481,2/542,8 mm, 360°, 2-track, extension circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 481.2/542.8 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.64%, outer gradient: 3.23%, outer diameter: 1167 mm

Regular price: CHF 100.95

On order

Rondela helix 481,2/542,8 mm, 540°, 2-track, base circle
I-Track HCT9674DR5
Rondela helix 481,2/542,8 mm, 540°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. Track radius 481.2/542.8 mm, 1- or 2-track, base circle, 9 segments = 1.5 circles, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.64%, outer gradient: 3.23%, outer diameter: 1167 mm

Regular price: CHF 157.25

On order

Rondela 481,2 mm, 360° 1-track, base circle
I-Track HCT9674R3
Rondela 481,2 mm, 360° 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 481.2 mm, 1-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 94.80

On order

Rondela-R 481,2 mm, 360° 1-track, extension circle
I-Track HCT9674R3A
Rondela-R 481,2 mm, 360° 1-track, extension circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 481.2 mm, 1-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 83.35

On order

Rondela-R 481,2 mm, 540° 1-track, base circle
I-Track HCT9674R5
Rondela-R 481,2 mm, 540° 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. Track radius R 481.2 mm, 1-track, base circle, 9 segments = 1.5 circles, build height: 135 mm, segment width: 80 mm, inner gradient: 3.64%, outer diameter: 1043 mm

Regular price: CHF 127.25

On order

Rondela helix R 542,8/604,4 mm, 360°, 2-track, base circle
I-Track HCT9675DR3
Rondela helix R 542,8/604,4 mm, 360°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 542.8/604.4 mm, 1- or 2-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1289 mm

Regular price: CHF 116.25

On order

Rondela helix R 542,8/604,4 mm, 360°, 2-track, additional circle
I-Track HCT9675DR3A
Rondela helix R 542,8/604,4 mm, 360°, 2-track, additional circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 add-on circle, track radius 542.8/604.4 mm, 1- or 2-track, 6 segments = 1 circle, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1289 mm

Regular price: CHF 106.15

On order

Rondela helix R 542,8/604,4 mm, 540°, 2-track, base circle
I-Track HCT9675DR5
Rondela helix R 542,8/604,4 mm, 540°, 2-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius 542.8/604.4 mm, 1- or 2-track, base circle, 9 segments = 1.5 circles, build height: 135 mm, segment width: 141.5 mm, inner gradient: 3.23%, outer gradient: 2.89%, outer diameter: 1289 mm

Regular price: CHF 163.80

On order

Rondela-R 542.8 mm, 360°, 1-track, base circle
I-Track HCT9675R3
Rondela-R 542.8 mm, 360°, 1-track, base circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 track radius R 542.8 mm, 1-track, base circle, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 3.23%, outer diameter: 1166 mm

Regular price: CHF 100.85

On order

Rondela-R 542.8 mm, 360°, 1-track, extension circle
I-Track HCT9675R3A
Rondela-R 542.8 mm, 360°, 1-track, extension circle

RONDELA is the name of our track helix system for N, TT and H0 gauges. This allows you to overcome height differences of any size in the smallest of spaces. For example, for the entrances to and exits from fiddle yards, or for changing the terrain level in mountains. The track helix consists of I-Track segments. They can therefore be connected seamlessly to the track helix. Thanks to its special construction, Rondela is extremely stable, rigid and load-bearing. The upper connecting segment has a smooth gradient transition. This eliminates a fault-prone kink at the transition to the track helix. If desired, you can also fit the supplied protective railing for your trains. Rondela is available in various radii and in 1-track or 2-track versions. All kits can be built to turn clockwise or anticlockwise. The recommended maximum gradient is 4%. If you fit the supports supplied at a basic spacing of 30°, you will get exactly this gradient. If you need a different gradient, you simply have to move the supports. Increasing the spacing between the supports makes the gradient shallower; reducing it makes the gradient steeper. However, you should not exceed the recommended maximum gradient of the Rondela concerned (see the "%" column of the article table)! You can of course build several circles on top of one another. The number of levels is not limited. With a base circle and the add-on circles built on top of it, your trains can therefore overcome almost any height difference. The individual parts are laser-cut from high-quality plywood and supplied as a kit with illustrated assembly instructions. Thanks to computer-aided production, everything fits together seamlessly. No cutting, sanding or drilling is necessary. After assembly, simply glue the individual segments together with Hacker superglue or standard wood glue. It is best to mount the track helix on our base plate for Rondela. It matches the dimensions of the track helix exactly and ensures a secure footing. If you use our base plate system, you will get an absolutely seamless connection to your fiddle yard. Rondela is suitable for all common track systems. For example, TRIX, Fleischmann, Roco, PIKO, Tillig, Märklin and all other track systems with these or comparable radii. H0 add-on circle, track radius R 542.8 mm, 1-track, 6 segments = 1 circle, build height: 135 mm, segment width: 80 mm, inner gradient: 3.23%, outer diameter: 1166 mm

Regular price: CHF 84.25

On order