Wagons and vans
Model In 2026 the anniversary of the signing of the Declaration of Independence in America comes around again. LGB is bringing out a special car for this anniversary. Flat car designed in the US colors. Car floor elaborately printed with various images on the theme of independence. Matching Liberty Bell load. Stakes in the US colors included. Metal wheel sets. Length over the couplers 42 cm / 16-9/16". Highlights With the Liberty Bell Elaborate printing on the car floor Design in the US colors
In stock: 1 on the shelf, shipped within 1-3 days
Model Model of a two-axle RhB high-sided open wagon equipped with metal wheelsets, with the running number 8511, prototypically painted and lettered as it looked in Era VI. Length over the buffers 40 cm. Highlights New running number 8511
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Model of a two-axle baggage car of the RhB. Prototypical colour scheme and lettering for Era IV. Metal wheelsets, doors can be opened. Length over the buffers 44 cm. Highlights Metal disc wheelsets
In stock: 1 on the shelf, shipped within 1-3 days
Model RhB container cars in the current Era VI version. These two models are further container cars with the typical advertising of the "coop®" retail chain. Set with two cars with the "Edellieschen" and "Schefflera" motifs. Cars with new car numbers rendered prototypically. Length over the buffers of each car 41 cm / 16-1/8". Highlights Different motifs Doors can be opened Metal disk wheel sets Cars individually packaged
In stock: 1 on the shelf, shipped within 1-3 days
Model Container car set consisting of 2 two-axle RhB container transport cars with new running numbers, in the Era VI version. Each loaded with a prototypical mail container. Container number 488 with the advertising lettering "landesweit" on the Lb 7875 container transport car and container number 478 with the advertising lettering "affidabile" on the Lb 7879 container transport car. Elaborate printing on the containers. Containers can be removed. Length over the buffers of each car 41 cm / 16-1/8". Highlights Different container lettering Metal disk wheel sets Cars individually packaged
In stock: 1 on the shelf, shipped within 1-3 days
Model Model of an RhB tank wagon of the Za type fitted with metal wheelsets, in the livery of Conrad-Storz AG, prototypically painted and lettered in the style of Era VI. The vehicle stands out with a prototypical new tank platform without railings. The tank can be filled and emptied. Length over the buffers 48 cm. Highlights New running number 8141
In stock: 1 on the shelf, shipped within 1-3 days
Prototype The four-axle sliding-wall vans have become an indispensable part of operations on the Rhaetian Railway. A great advantage of these vans is that they are easy and quick to load; as a rule, whole pallets are loaded with a forklift. Many of the vans have an effective advertising design, including the van with the number Haik 5130, which is designed with the Märklin brands. Model Model of a four-axle sliding-wall van of the Rhaetian Railway (RhB). Prototypical colour scheme and lettering for Era VI with advertising for the Märklin brands. The sliding doors can be opened and closed just as on the prototype. Metal disc wheelsets. Length over the buffers 62 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Model of a crane wagon, as used above all for construction work on railway installations and on tracks. The crane arm and the crane hook can be raised and lowered using hand cranks. The crane superstructure can be rotated. Length over the buffers 25 cm.
On order, shipped within 10-15 days
Prototype In steel mills such wagons are used for transporting slag, but also molten pig iron. The design alone - massive and heavy - shows what these vehicles are used for, and in almost all cases they are soiled by their special use. Wagons of this kind are as a rule used only within the steel mills; they are not seen on the tracks of the state railways. Model Model of a slag wagon as it is used in many steel mills to transport slag or even molten steel. Colour scheme and lettering appropriate to its purpose, with corresponding weathering. The tub can be emptied under digital control. Length over the buffers 32 cm. Highlights The tub can be emptied under digital control Current pickup via ball-bearing wheelsets With traces of weathering Can be used universally Many play possibilities, especially in the garden
On order, shipped within 10-15 days
Prototype This passenger coach, which is still in use today on many Saxon narrow-gauge railways, is used on the Pressnitztalbahn as a buffet car. On special occasions on the Pressnitztalbahn, the coach can be seen on the line with the anniversary logo "25 Jahre wieder nach Steinbach". This passenger coach is the prototype for our 2025 LGB museum coach. Model Model of a 4-axle passenger coach of this year's partner, the Pressnitztalbahn. Prototypical colour scheme and lettering for Era VI with the reference to the anniversary "25 Jahre wieder nach Steinbach". The doors on the platforms can be opened, complete interior details. Metal wheelsets. Length over the buffers 58 cm. Highlights Matching the anniversary "25 Jahre wieder nach Steinbach". Fine detailing Metal wheelsets Also runs in this version on the original One-time series One-time series. Available only in the Märklineum Store Göppingen.
On order, lead time to be confirmed
Model of an open goods wagon as a kit, for assembling and finishing yourself. Assembly instructions are included. Plastic chassis. Length over the buffers 30 cm. The wagon is not suitable for outdoor operation.
On order, shipped within 10-15 days
Model 2-axle freight car of the DEV as the car has run on the German Railroad Association museum railway since its last overhaul in 2019. Current paint scheme and lettering. Metal wheel sets. Length over the buffers 30 cm / 11-13/16". Highlights Matches the Märklineum museum car 2026
On order, shipped within 10-15 days
Model of a baggage car of the Brünig Dampfbahn BDB. Prototypical colour scheme and lettering for Era VI. Completely reproduced interior details. Doors on the ends and side sliding doors can be opened. Metal spoked wheelsets. Length over the buffers 45 cm.
On order, shipped within 10-15 days
Prototype Model of an "Express Service" boxcar of the Union Pacific. Silver Era III paint scheme and lettering. Many applied details, sliding side doors can be opened. Metal wheel sets. Length over the couplers 46 cm / 18-1/8".
On order, shipped within 10-15 days
Prototype Model of a Union Pacific boxcar. Brown Era III paint scheme and lettering. Many applied details, sliding side doors can be opened. Metal wheel sets. Length over the couplers 46 cm / 18-1/8".
On order, shipped within 10-15 days
Tipping wagons were used in large numbers in quarries and mines. They were used for transporting sand, clay, coal or ore. The LGB model is a prototypical reproduction of a typical tipping wagon. The model can be used in Eras II to V. Length over the buffers 17 cm.
On order, shipped within 10-15 days
A covered goods wagon of the GGw class, as used around 1917 in Era I by the Royal Saxon State Railways (K.Sächs. Sts. E.B.). Running number 2324 K. Detailed red brown colour scheme and lettering. Metal wheel sets. Length over the buffers 48 cm. Compatible with L43605
On order, shipped within 10-15 days
Model Model of a type OOw gondola, as used around 1916 by the Royal Saxon State Railways. Running number 5069 K. Detailed red-brown Era I paint scheme and lettering. Metal wheel sets. Length over the buffers 48 cm / 18-7/8". Highlights Gondola of the Saxon State Railways, Era I. Matching car 43604
On order, shipped within 10-15 days
Prototype These flat cars with heavy double stakes are a familiar sight in the freight trains of the Rhaetian Railway; they are used above all to transport heavy loads such as logs, steel beams or pipes. Built in the 90s, the cars are 16.54 meters / 54 feet 3-3/16 inches long over the buffers, weigh 17.6 metric tons empty and can be loaded with 22 to 42 metric tons depending on the type of train. For special cases there are separate end walls that can be inserted into the stake holders on the buffer beams and secure the load to the front and rear. This is very often done when loading heavy, large-diameter pipes. Model Model of a type Sp-w double stake car of the RhB. Prototypical Era VI paint scheme and lettering. High end walls that serve to secure the load on the prototype. Without a brakeman's platform, with a hand brake wheel mounted on the side. Length over the buffers 66 cm / 26". Highlights Re-release. Prototypical lettering
On order, shipped within 10-15 days
Prototype On most railways today, a large part of the freight traffic is handled with containers, including on the Rhaetian Railway in Graubünden. Since the same containers have to be loaded on the narrow gauge railway as on the standard gauge railway, a special design was required: the loading surface is lowered between the bogies so that the wagon with a container loaded on it does not exceed the loading gauge. In addition to containers, transport racks - for example for logs - can also be loaded on these wagons; these can then be transferred complete either to standard gauge wagons or - for the last kilometres to the destination - to a lorry. There are different designs of these wagons, above all in the arrangement of the handbrake: on some wagons a handbrake crank is mounted on the brake platform, on others a large handwheel for applying the brake is mounted on the side of the frame. Model Model of a container wagon of the Sb-t type of the Rhaetian Railway. Version of a wagon with a handbrake crank on the platform. Prototypical colour scheme and lettering for Era VI. Loaded with a container of the Swiss Post in the current "Matterhorn" livery. Metal wheelsets. Length over the buffers 71 cm. Highlights Completely new tooling Note All existing LGB containers used by the RhB can be loaded on this wagon.
On order, shipped within 10-15 days
Model Tank wagon to match the Märklin factory locomotive. Reproduction of a tank wagon of the Hungarian State Railways MAV, as also used in international service. Colour scheme and lettering of Era IV. The tank can be filled and emptied. Metal wheel sets. Length over the buffers 48 cm. Highlights Can be filled with water Metal wheel sets. Matches the Märklin factory locomotive
Pre-order, release expected in Q1 2027
Prototype RhB tank car set of the Za series. Prototypical Era VI paint scheme and lettering. Running numbers Za 8131 and Za 8136. The tank can be filled and emptied. Metal wheel sets. Length over the buffers of each car 48 cm / 18-7/8".
On order, shipped within 10-15 days
Model Model of a typical American old-time goods wagon (covered van) in the version of the Nevada Central Railroad, as it was in use back then up into the 1930s. Prototypical colour scheme and lettering for Era II. Side sliding doors that can be opened. Metal wheelsets. Length over the coupler 42 cm. Highlights Metal wheelsets Sliding doors that can be opened Prototypical colour scheme and lettering Note The matching locomotive of the "Mogul" type for this wagon is available under item number 20284, a passenger car under number 36830 and a combine under number 36831.
On order, shipped within 10-15 days
Model This add-on set for the construction site train contains a further tipper wagon, an excavator with a manually movable shovel, a play figure as well as a number of typical construction site accessories such as barriers and signs. The tipper wagon can be decorated with the stickers included. Length of the tipper wagon 17 cm. Note The 70503 construction site set can be ideally expanded with this add-on set.
On order, shipped within 10-15 days