Freight wagons H0
Prototype Two wagons of different types of the Hungarian State Railways (MÁV). A two-axle swivelling stanchion wagon, type Ks, and a two-axle covered van, type Gbgs. Oxide red basic paint scheme. The vehicles look as they did at the end of the 1970s. Model Swivelling stanchion wagon with separately applied truss rods and long end stakes. With separately applied braking system, brake controls and swivelling stanchions. Loading area with a wooden plank look. Sockets at the ends for fitting the stanchions that are included. Buffer height to NEM. Round buffer heads. Covered van with panel walls and truss rods. Both wagons are packed individually in additional outer packaging. Total length over the buffers approx. 32 cm. DC wheelset E700580. Highlights Foldable swivelling stanchions Many applied details Wagons packed individually in additional outer packaging One-time series This goods wagon set to match the Märklin works locomotive Györ is being produced in 2026 in a one-time series only for Insider Club members.
Club members only (Märklin Insider)
Prototype 6-axle articulated double pocket wagon, type Sdggmrss, with curved side surfaces, of MFD Rail GmbH. Modern flat wagon for combined transport service. Granite grey basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage firm. Model Both flat wagon halves are of metal and are movably mounted on the middle bogie. The folding latches on the sides are mounted at the factory. They can be folded up for the transport of containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines, and grab rails at the wagon ends. Type Y25 bogies. Buffer height according to NEM. A mount for a support trestle, brackets for kingpins in a high and a low version, shunting steps, and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage firm. Length over the buffers approx. 39.3 cm. DC wheelset E700580. Highlights Completely new tooling Detailed version largely of metal Folding latches mounted and functional Many separately applied details Buffer height according to NEM. Loaded with two semi-trailers
Prototype 6-axle articulated double pocket wagon, type Sdggmrss (T3000e), of CFL Cargo. Modern flat wagon for combined transport service. Pure green basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage firm. Model Both flat wagon halves are of metal and are movably mounted on the middle bogie. The folding latches on the sides are mounted at the factory. They can be folded up for the transport of containers or swap bodies. Many separately applied details such as steps, brake lines, and grab rails at the wagon ends. Type Y25 bogies. Buffer height according to NEM. Brackets for kingpins in a high and a low version, shunting steps, and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage firm. Length over the buffers approx. 39.3 cm. DC wheelset E700580. Highlights Detailed version largely of metal Folding latches mounted and functional Many separately applied details Buffer height according to NEM. Loaded with two semi-trailers
Prototype 6-axle articulated double pocket wagon, type Sdggmrss 738 (T3000e), of the Deutsche Bahn AG (DB AG). Modern flat wagon for combined transport service. Traffic red basic paint scheme. Version with two folding latches on the sides. The wagon looks as it did starting in 2020. Loaded with two 40ft. box containers. Model Both flat wagon halves are of metal and are movably mounted on the middle bogie. The folding latches on the sides are mounted at the factory. They can be folded up for the transport of containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines, and grab rails at the wagon ends. Type Y25 bogies. Buffer height according to NEM. Brackets for kingpins in a high and a low version and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two 40ft. box containers of the fictitious haulage firm Märklin Container shipping. One container in a High-Cube version. Length over the buffers 39.3 cm. DC wheelset E700580. Highlights With an attractive load Detailed version largely of metal Folding latches mounted and functional Many separately applied details Buffer height according to NEM. Special model, available only in the Märklin Stores (D: Göppingen, Mainz, Essen, Stuttgart, Neustadt/Donau, Mühlheim/Main, München. NL: Utrecht. IT: Bergamo. JP: Osaka) One-time series One-time series.
Prototype Chemical tank wagon of VTG AG, registered in Germany. Type with an insulated kinked tank and a side ladder. Model Detailed chassis with an open-work frame. Type P65 bogies. Numerous applied separate parts. Length over the buffers 18.0 cm. DC wheelset E700580.
Prototype Two-axle container wagon in a cool, youthful Christmas livery. Model Two-axle container wagon with Relex couplers. Wagon length 11.5 cm. DC wheelset E700580 available separately. Highlights Wagon body in a cool, Christmas livery Relex couplers for quick and easy coupling One-time series One-time series. Note Annual model for members of the Märklin Start up Club and Märklin Insider.
Club members only (Märklin Insider)
Prototype: 2-axle tank wagon. Privately owned wagon of BP Benzin und Petroleum AG, Hamburg, registered with the Deutsche Bundesbahn (DB). Operating condition, Era III.
Club members only (Märklin Insider)
Prototype 4-axle open high-capacity self-unloading hopper wagon of the OOt type, with high upper body. Riveted version. With brake platform at one end and handwheel on one side of the wagon as well as signal supports on the upper body at the ends. Works wagon of the Rheinische Stahlwerke Abt. Arenberg Essen. The wagon looks as it did around 1927. Model Detailed reproduction of the visually striking rows of rivets and signal supports on the upper body. Reproduction of the steering axles. Length over the buffers 11.5 cm. DC wheelset E700580. Highlights Insider annual wagon H0 2026 Variant of the new tooling of the OOt Oldenburg high-capacity self-unloading hopper wagon from 2025 Exclusive special wagon, included in the club membership fee One-time series One-time series only for Märklin Insider members.
Club members only (Märklin Insider)
Prototype 2 covered milk vans of Bavarian design of the German Federal Railway (DB). Wagons from the first delivery in 1908 with a flat roof. Both wagons still with DR lettering of the British-US zone. Used in part-load freight service or for transporting fresh milk. The wagons look as they did around 1952/53. Model 6 Grove type ventilators on the roof per wagon. Two steps below the sliding doors on each side. Applied access steps on one end of each of the wagons. Both goods wagons have different running numbers, are packaged individually, with additional outer packaging. Overall length over the buffers 22.2 cm. DC wheelset E700580 per wagon. Highlights Wagons for use in part-load freight service and for transporting fresh milk Finely detailed version Also suitable for including in passenger trains
Prototype 5 freight cars of different types of the German Federal Railroad (DB). 1 type Pwg freight train baggage car with a roof clerestory (Pwg Pr 14). 1 type Omm 34 high-side gondola (former Ommu Klagenfurt). 1 type Gmrs 30 boxcar (former Grhs Oppeln, still with DR British-American Zone markings). 1 type G München boxcar (still with DR French Zone markings). 1 type G 10 boxcar. The cars look as they did around 1954. Model Freight train baggage car and G 10 boxcar with sliding doors that can be opened. High-side gondola with a load insert and real coal in a scale grain size. The G 10 boxcar as the last car in the train can be fitted with the included marker discs for installation by the owner. All cars with different running numbers. Total length over the buffers approx. 53.9 cm. DC wheel set for each car E700580. Note The matching E 71.1 electric locomotive is also being produced under item number 39771 in a one-time series exclusively for Insider members. The freight car set for the E 71.1 is being produced in 2022 in a one-time series only for Insider members. You can find this freight car set in a DC version in the Trix H0 assortment under item number 24825 exclusively for Trix Club members.
Club members only (Märklin Insider)