Mini-Club (Z)
Prototype Class 140 electric locomotive in chrome oxide green and 3 pairs of coaches made up of 3-axle rebuilt coaches B3yge of the Deutsche Bundesbahn (DB). All vehicles in Era IV condition around 1972. Model Class 140 electric locomotive with a bell-armature motor and warm white LED headlights. The matching pairs of coaches are each permanently coupled and each has a system coupler at the end. Length over the buffers approx. 450 mm. Highlights Bell-armature motor LED headlights. 3 permanently coupled pairs of coaches Note On the prototype such trains were also frequently run in double heading; for reasons of tractive effort on gradients we also recommend putting another model from this era in front.
On order, shipped within 10-15 days
Prototype Goods train of the Deutsche Bundespost consisting of diesel locomotive no. 4 (ex class 261) with 3 covered vans Gbs 245. Model Locomotive with a bell-armature motor, mostly of metal. Also headlights with warm white LEDs changing over with the direction of travel, all wagons printed in prototypical fashion, different running numbers. Length over the buffers approx. 216 mm. Highlights Locomotive with a bell-armature motor One-time series One-time series.
Pre-order, release expected in November 2026
Prototype 1 class 89 steam locomotive of the Deutsche Bundesbahn (DB), 1 low-sided open wagon of the DB with a tarpaulin, 1 covered van. Model Locomotive made of metal. All driving axles powered. Low-sided open wagon with a tarpaulin cover. Covered van with advertising lettering. Small circle of track consisting of 2 straight tracks each 110 mm long, 10 curved tracks, of which 4 x 8520 and 6 x 8521. Rerailer and a 230 V/12 VA switched-mode power supply with a matching controller. Track plan booklet. Train length approx. 160 mm. Expansion with the SET packs 8190 or 8191, 8192, 8193 and 8194 or according to your own designs.
On order, shipped within 10-15 days
Prototype 1 steam locomotive, 1 covered goods wagon, 1 high-sided open wagon, 1 coach. Model The locomotive is made of metal and has a tender, in a Christmas livery, with a 5-pole motor, all driving axles powered. All 3 vehicles are likewise in a Christmas livery. In addition to 3 x 2 decorated Christmas trees, the kits "Weihnachtsbuden", "Weihnachtsmann" and "Eisbahn" are included, which after assembly make up a small wintry Christmas market. The stalls can also be transported on the high-sided open wagon if required. Further contents of the set: 2 straight tracks, 10 curved tracks, a rerailer and a 230 V/12 VA switched-mode power supply with a matching controller. Track plan brochure. Train length approx. 300 mm. Track length approx. 510 mm. The perfect extension can be made with 82720, with the SET packs 8190 or 8191, 8192, 8193 and 8194, or to your own designs.
On order, shipped within 10-15 days
Prototype 1 heritage steam locomotive 24 009. 1 luggage van Pwi, 1 1st/2nd class corridor coach and 1 restaurant car WRi in their current operating condition. Model The class 24 locomotive is made of metal. The tender is made of plastic. Technically revised model with a bell-armature motor, all driving axles powered. Coupling rods and wheelsets black nickel-plated. 2 coaches and 1 luggage van with black disc wheelsets. Train length approx. 240 mm. Large track circle with 6 straight track sections 110 mm (of these 5 x 8500, 1 x 8590 feeder track), 4 curved tracks 8520 and 6 curved tracks 8521. Also included: track plan brochure, rerailer, controller and switched-mode power supply for the power supply and speed control. The track layout can be expanded, for example with the SET packs 8190 or 8191, 8192, 8193 and 8194 or to your own designs. Highlights Steam locomotive with a bell-armature motor Large track circle
On order, shipped within 10-15 days
Prototype 1 class 285 diesel locomotive of RheinCargo. 3 goods wagons of VTG, of these 1 x open goods wagon type Eaos, 1 x self-unloading hopper wagon type Falns and 1 x sliding-tarpaulin wagon Shimmns. All vehicles in the operating condition of Era VI. Model The class 285 locomotive has a metal chassis and a plastic body. Bell-armature motor, all driving axles powered. 3 prototypically finished goods wagons. Train length approx. 265 mm. Large track oval with 6 straight track sections 110 mm (of these 5 x 8500, 1 x 8590 feeder track), 4 curved tracks 8520 and 6 curved tracks 8521. Also included: track plan brochure, rerailer, controller and switched-mode power supply for the power supply and speed control. The track layout can be expanded, for example with the SET packs 8190 or 8191, 8192, 8193 and 8194 or to your own designs. Highlights Locomotive with a bell-armature motor Large track oval
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 2 curved tracks, 2 points and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 2 curved tracks, 2 points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 6 straight tracks, 6 curved tracks, 2 electromagnetic curved points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
Pre-order, release expected in 2027
Model Contents: 8 straight tracks, 2 curved tracks, 2 electromagnetic curved points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 1 double slip, 2 electromagnetic points, 4 buffer stops, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
Pre-order, release expected in 2027
Model Contains all the parts for assembling the S+E catenary. Contents: 19 masts for the catenary, 20 contact wire sections, 8 isolating sections, 6 connecting springs and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Addition to 8198 for T1 to T3. Contents: 4 masts for the catenary, 16 tower masts, 30 contact wire sections, 8 cross connections, 30 contact wire insulators, 8 isolating sections, 6 connecting springs, 5 contact wire clamps and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Prototype 5 carbide bottle wagons. Privately owned wagons of SKW Trostberg AG registered with the German Federal Railway (DB). All wagons in the condition of Era IV. Model Different running numbers and bottle numbers. Filigree version with an open-work metal wagon floor. Finely detailed reproduction of the removable carbide bottles. The models are not available individually. Overall length 288 mm.
On order, shipped within 10-15 days
Prototype Privately owned type Gl 11 standard design boxcar as it looked in Era III, with advertising lettering for the Badische Staatsbrauerei Rothaus AG, registered with the German Federal Railroad (DB). Version without a hand brake. Car number 546 078. Model Car with an elaborate paint scheme marking the 70th anniversary of the "Tannenzäpfle" beer brand of the Badische Staatsbrauerei Rothaus AG. Length over the buffers 53 mm. Highlights Special car for the anniversary
On order, shipped within 10-15 days
Prototype 2-axle departmental goods wagon with a brake cabin of the German Federal Railway (DB) for transporting combustion fuels. Condition of Era IIIb. Model Tank wagon with a brake cabin. Black disc wheels. Length over the buffers 40 mm.
On order, shipped within 10-15 days
Prototype Acid pot wagon with 12 acid pots. Version with a brake platform. Model The wagon body and wagon floor are cast in bronze by hand, with a transparent protective lacquer. The acid pots and the brake platform are made of black plastic as a contrast. Disc wheelsets black nickel-plated. Length over the buffers 40 mm. Highlights From the Märklin Z Manufakturmodelle fine casting edition Body and wagon floor cast in genuine bronze One-time series One-time series.
On order, shipped within 10-15 days
Prototype 3 wagons from a track construction train of DB Bahnbau Gruppe (DB AG), type Fc 089, in the condition of Era VI. Model Track construction wagon set consisting of 3x rotary-chute side-unloading wagons Fc. All wagons with individual running numbers. Total length over the buffers approx. 133 mm. Highlights Finely detailed models Individual wagon numbers One-time series This model is produced in a one-time series exclusively for the Märklin Händler-Initiative (MHI).
Pre-order, release expected in December 2026
Prototype 3 self-unloading hopper wagons with hinged roof, type Tds 925, of the Deutsche Bundesbahn (DB), in the condition of Era IV around 1976/1977. Model 3 x self-unloading hopper wagons made of plastic, with movable hinged roof. Wagons are detailed and finely lettered. Length of the vehicle over the buffers approx. 132 mm. Highlights Hinged roof that can be opened
Pre-order, release expected in Q1 2027
Prototype 1 self-unloading hopper wagon with hinged roof, type Tds 925, and 1 covered van Gbs 245 of the Deutsche Bundesbahn (DB) in the condition of Era IV around 1976/1977. Model 1 x self-unloading hopper wagon with movable hinged roof and 1 covered van made of plastic. Wagons with detailed construction and fine lettering. Length of the vehicle over the buffers approx. 99 mm. Highlights Hinged roof that can be opened
Pre-order, release expected in Q1 2027
Prototype 2 tank cars of Soviet origin of the DR (East), leased to VEB Kombinat Deutzen (former lignite works). The cars look as they did in Era IV. Model 2 different tank cars, each with 1 dome and a work platform. Disk wheel sets with black/black nickel finish. Total length approx. 104 mm. Note The 88490 electric locomotive goes with car set 82521.
On order, shipped within 10-15 days
Prototype 2 covered vans with a brake cabin. Gl Dresden, association design of the Deutsche Reichsbahn-Gesellschaft (DRG). Version with advertising lettering for Kessler-Sekt-GmbH, Esslingen am Neckar. Model Different running numbers. Both vans in a special version with signs of weathering. Length over the buffers approx. 114 mm. The vans are not available individually.
On order, shipped within 10-15 days
Prototype Four open self-unloading hopper wagons, type OOtz 44, of the Deutsche Bundesbahn (DB), in the condition of Era III. Model New tooling for the OOtz 44 self-unloading hopper wagon. The wagon body is made of plastic, finely detailed, and prototypically lettered. The wagons are equipped with close coupling hooks. Length over the buffers approx. 187 mm. Highlights New tooling
On order, shipped within 10-15 days
Prototype Class 193 (Vectron) electric locomotive of European Locomotive Leasing (ELL), leased to Dutch Railways (NS). Running number 193 733-3. Operating condition, 2021. Model Highly refined design. Metal chassis, plastic locomotive body. Elaborate colour scheme and lettering. Fitted with a bell-armature motor, both bogies powered. Applied details, warm white/red LED headlights that change over with the direction of travel. Both bogies powered. Length over the buffers approx. 86 mm. Highlights Finely detailed model Bell-armature motor Warm white/red LED headlights
Pre-order, release expected in Q1 2027