Mini-Club (Z)
Z gauge display case with an internal length of 120 mm. All parts made of transparent acrylic glass. With a high-quality, dustproof acrylic glass cover. 2 milled wheelset grooves in the base for Z gauge wheelset width. Internal dimensions of the display case L120 mm x H45 mm x W39 mm. External dimensions L126 mm x H51 mm x W45 mm.
On order, shipped within 10-15 days
2 positions: "Stop" (Hp0) and "Proceed" (Hp1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
3 positions: "Stop" (Hp0), "Proceed" (Hp1) and "Slow speed" (Hp2). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
4 positions: "Stop" (Hp00), "Proceed" (Hp1), "Slow speed" (Hp2) and "Train stop, shunting permitted" (Hp00/Sh1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
2 positions: "Stop, movement prohibited" (Sh0), "Movement prohibition lifted" (Sh1). Warm white/red LED lighting. Height 7 mm.
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Proceed" (Hp1). Single arm, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Slow speed" (Hp2). 2 coupled arms, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
With 2 single-pole switches and one changeover switch for different circuits. A wide variety of tasks can be assigned to the universal remote switch (up to 3 functions at the same time), which it carries out automatically. Operating voltage 10 V. Twin-coil drive. It is operated by a circuit track, the 7272/72720 control panel or a manual switch lever. Width 30 mm. Length 70 mm. Height 8 mm.
On order, lead time to be confirmed
With 2 single-pole switches and 1 changeover switch, for example for controlling the light change in the 8939 signal and the track power. Width 30 mm. Length 70 mm. Height 8 mm.
On order, shipped within 10-15 days
Lighting base for buildings
On order, shipped within 10-15 days
With a 10 V light bulb. For use in the 8950 lighting base, the 8939 signal (old version) and 8940, the 8992 level crossing, in all locomotives that can be lighted and in models of ICE intermediate cars (exception: lighting with maintenance-free LEDs).
On order, shipped within 10-15 days
Prototype Jagstzell station. The municipality of Jagstzell with its station is located in the Ostalbkreis district in Baden-Württemberg on the Crailsheim - Ellwangen line. Model Very delicate, extremely detailed lasered model with a precise fit and numerous details. Model frame, interior area and body made of architectural card. Fine sandstone engraving as well as shutters with engraving. Doors, bargeboards with wood decoration and window glazing are included in the contents supplied. The kit is prepared for reproducing different stations; the corresponding signs (Jagstheim, Schwabsberg) are included in the contents supplied. Detailed assembly instructions are included in the contents supplied. Dimensions of the model with the small annex: L x W x H approximately 80 mm x 50 mm x 52 mm. Highlights Suitable for many eras (I-VI) Delicate, detailed model Different stations can be reproduced
On order, shipped within 10-15 days
Length 220 mm.
On order, shipped within 10-15 days
Prototype Flood relief bridge, green steel look. Model Kit for a single-track flood relief bridge in a steel look. With abutments, without piers. The card kit made of high-quality architectural card is precisely laser-cut, with a reproduction of the rivets on the gusset plates on the longitudinal and cross girders and a footway with plank engraving. The kit can be assembled with commercially available adhesives. Dimensions: L 110 mm x W 27 mm x H 27 mm. Highlights Extremely fine engraving
On order, shipped within 10-15 days
Length 110 mm.
On order, shipped within 10-15 days
Radius 145 mm. Track curve 45°.
On order, shipped within 10-15 days
Contains 10 piers. Height 4, 8, 12, 16, 20, 24, 28, 32, 36 and 40 mm.
On order, shipped within 10-15 days
Contains 5 piers. Height 40 mm.
Content: 5 pc. (CHF 2.18 / 1 pc.)
On order, shipped within 10-15 days
Model 2 x 3-road roundhouse (dimensions each: width at the rear 200 mm, width at the front 100, long sides 140 mm, height approx. 50 mm), which can be converted into a 6-road engine shed, or can extend 89982 to a 9-road or 12-road engine shed. The card kits are precisely laser-cut from high-quality architectural card and can be assembled with commercially available adhesives. 6 isolating tracks for stopping the locomotives automatically are also included. Highlights Architectural card model cut precisely with the laser Isolating tracks in the contents supplied
On order, shipped within 10-15 days
For locomotives 88021 and 8831.
On order, shipped within 10-15 days
The set consists of 2 electromagnetically operated barriers, each with 2 red warning lamps that are lit when the barrier is closed. Size of each base 96 x 37 mm. The following are additionally required for the level crossing: for manual operation: 1 signal hand switch 8946, for automatic operation by the passing train: 1 universal remote switch 8945 and 2 contact tracks (depending on the track layout, e.g. 8529, 8539 or 8589) per track.
On order, shipped within 10-15 days
Allows reversing loops to be run through from one side when the tracks are arranged according to their markings. The set consists of 3 x isolating track 110 mm long and one straight track 25 mm long.
On order, shipped within 10-15 days
8 edge segments with track connections for plugging onto the turntable rim. With 2 extension sets the turntable can be expanded to up to 24 track connections. Colour-matched to the 89982 turntable.
On order, shipped within 10-15 days
Model The model is designed for recessed installation in the layout baseboard. 8 track connections around the rim. Can be expanded to up to 24 track connections with the 89971 plug-on edge segments. Richly detailed features and prototypical colour scheme. Remote control of the turntable bridge with the matching control unit included in the contents supplied. Powered by a strong electric motor. Automatic switching off of all tracks that are not in contact with the turntable bridge. A Z gauge controller is also included with the turntable for sensitive running of the locomotives onto and back off the turntable bridge as well as throughout the locomotive depot area. The necessary power supply is also included in the set. Outside diameter of the turntable 170 mm. Length of the turntable bridge 132 mm. Diameter of the installation opening in the baseboard 145 mm. Installation depth approx. 30 mm with the cables connected directly, approx. 50 mm when using plugs. Highlights Prototypical turntable With a control unit for the turntable, a Z gauge controller and a power supply
On order, shipped within 10-15 days