Swiss trains H0
Prototype Two type EWIII standard passenger coaches of the Swiss Federal Railways (SBB/CFF/FFS). One high-capacity coach, type A, 1st class and one high-capacity coach, type B, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève–Lausanne–Bern–Zürich HB. Car numbers 2 and 12. The coaches look as they did starting in 1975. Model Complete new tooling for the EWIII family of coaches. Multi-coloured interior details. Both coaches have LED interior lighting built in as standard. A buffer capacitor is built into each coach to bridge brief stretches without power. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car from set 42190; the prescribed order of the vehicles must be maintained for this. Type-specific bogies, roof shapes, side walls and underbodies with many applied details. Buffer height per NEM. Separately applied vents, grab rails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. In addition, a set of dry transfers with four other running numbers and car numbers is included with each of the two coaches. Together with set 42190, a prototypical 14-part set can be represented by using five add-on sets. Both coaches are packaged individually in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approximately 56.6 cm. Highlights Complete new tooling for the EWIII family of coaches For the "50 Years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting built in as standard with buffer capacitors Separable, current-conducting close couplers Many separately applied details Buffer height per NEM. With a set of dry transfers with other running numbers and car numbers
In stock, shipped within 1-3 days
Prototype Four type EWIII standard passenger coaches of the Swiss Federal Railways (SBB/CFF/FFS). One combine, type AD, 1st class, one restaurant car, type WR, and two high-capacity coaches, type B, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève–Lausanne–Bern–Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Complete new tooling for the EWIII family of coaches. Multi-coloured interior details. All of the coaches have LED interior lighting built in as standard. A buffer capacitor is built into each coach to bridge brief stretches without power. Restaurant car with lighted table lamps. One high-capacity coach has tail lighting built in as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the prescribed order of the vehicles must be maintained for this. There is a digital interface in the restaurant car for fitting a function decoder to control various lighting functions. Type-specific bogies, roof shapes, side walls and underbodies with many applied details. Buffer height per NEM. Separately applied vents, grab rails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. The coach with car number 14 also comes with an imitation of an automatic coupler. All of the coaches are packaged individually in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approximately 113.2 cm. Highlights Complete new tooling for the EWIII family of coaches For the "50 Years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting built in as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with lighted table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height per NEM
In stock, shipped within 1-3 days
Prototype Two former Db type crew escort coaches of the Swiss Federal Railways (SBB/CFF/FFS). Pebble grey/blood orange basic paint scheme, in use as coupling coaches for the Swiss Express. The coaches look as they did starting in 1975. Model Completely new tooling for the Db type "Sputnik" crew escort coach. Type-specific underbody design with many separately applied details. Buffer height according to NEM. Separately applied grab rails, handbrake crank, gas box, and roof ventilators. With interior details. Length over the buffers approximately 21.3 cm. DC wheelset E700580. Highlights Completely new tooling for the "Sputnik" crew escort coach. For the "50 Years of the Swiss Express" anniversary. Many separately applied details Buffer height according to NEM
In stock: 5 on the shelf, shipped within 1-3 days
Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances suitable for the disabled and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the disabled and a pantograph. 1 end car L (At2), 1st class. Multi-system multiple unit. Reproduction of the EC 151, with a cross-border route: Frankfurt/Main - Freiburg - Basel - Zürich - Milano Centrale. Train number RABe 501 022, with the coat of arms of the canton of Vaud. The train looks as it did around 2024. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to each other by means of the Jacobs bogies. It has an mfx+ digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car are powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power is supplied by whichever end car is leading, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red marker lights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be switched to a single white marker light (Swiss lighting changeover). Other light functions can be controlled separately. Interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately in digital operation. All of the lighting uses maintenance-free warm white and red LEDs. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approx. 112 cm. Highlights LED interior lighting fitted as standard The cab lighting and the driver's desk lighting can be controlled digitally The pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Märklin Spielewelt mfx+ decoder with extensive light and sound functions Cross-border route: Frankfurt/Main-Freiburg-Basel-Zürich-Milano Centrale Train number RABe 501 022, with the coat of arms of the Swiss canton of Vaud/Waadt The illuminated destination displays in the doors go out once the train has pulled away Note The 5-part base set 39812 can be expanded with the 2-part add-on car sets 43451, 43452 and 43453 to make a prototypical 11-part multiple unit.
- 3-rail, alternating current
- Digital
- Sound
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car D (B9), 2nd class, with a pantograph. 1 intermediate car E (B8), 2nd class. Matching EC 151, with a cross-border train route: Frankfurt/Main - Freiburg - Basel - Zürich - Milano Centrale. Train number RABe 501 022 with the coat of arms of the Swiss canton of Vaud. The cars look as they did around 2024. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit into an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied through the continuous electrical connection running the length of the entire train and only works and can be controlled digitally in combination with the base set. The pantograph on one intermediate car can likewise only be raised and lowered separately in combination with the base set, as a digital function by means of the decoder. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights LED interior lighting fitted as standard Pantograph can be raised and lowered separately as a digital function only in combination with the base set Cross-border train route: Frankfurt/Main-Freiburg-Basel-Zürich-Milano Centrale Matching add-on cars for train number RABe 501 022 Canton of Vaud Note The 39812 base set can be expanded with the 43451, 43452, and 43453 add-on car sets into a prototypical 11-part unit.
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car J (A4), 1st class. 1 intermediate car K (A3), 1st class. Matching EC 151, with a cross-border train route: Frankfurt/Main - Freiburg - Basel - Zürich - Milano Centrale. Train number RABe 501 022 with the coat of arms of the Swiss canton of Vaud. The cars look as they did around 2024. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit into an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied through the continuous electrical connection running the length of the entire train and only works and can be controlled digitally in combination with the base set. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights LED interior lighting fitted as standard Cross-border train route: Frankfurt/Main-Freiburg-Basel-Zürich-Milano Centrale Matching add-on cars for train number RABe 501 022 Canton of Vaud Note The 39812 base set can be expanded with the 43451, 43452, and 43453 add-on car sets into a prototypical 11-part unit.
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Five 4-axle self-unloading hopper wagons of the Falls type of the HASTAG Kies AG. Registered in Switzerland. The wagons look as they did starting in 2011. Model Many separately applied details. All wagons with a "gravel/ballast" load insert. Wagons individually packaged in additional outer packaging. Total length over the buffers approx. 69.5 cm. DC wheelset E700580. Highlights Attractive livery of the HASTAG Kies AG. Many separately applied details With a gravel/ballast insert All wagons with different running numbers and wagon numbers
In stock: 4 on the shelf, shipped within 1-3 days
Prototype Re 4/4 II electric locomotive, 1st production series of the Swiss Federal Railways (SBB). Pebble grey and blood orange basic paint scheme as the train locomotive for the Swiss Express. Running number 11141. The locomotive looks as it did starting in 1975. Model The locomotive has an mfx+ digital decoder and extensive sound functions. It also has a centrally mounted, regulated high-performance motor with a flywheel. All four axles powered using cardan shafts. Traction tyres. The triple headlights and one white tail lamp (Swiss lighting changeover) change over with the direction of travel. They will work in conventional operation and can be controlled digitally. The lighting can be changed over to one red tail lamp when the locomotive is running on its own. The headlights at locomotive ends 2 and 1 can each be turned off separately in digital operation. The shunting, warning and wrong-line signals can be controlled digitally. The cab and engine room lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. Finely detailed roof equipment with a newly tooled pantograph. Many separately applied details such as handrails and the imitation of the automatic coupler including the transversely mounted rodding. Buffer height to NEM standards. Brake lines, sockets, filler pieces for the pilot and the complete automatic coupler are included as separate plug-in parts. Length over the buffers 17.8 cm. Highlights Completely new tooling in a highly detailed metal version For the anniversary "50 Years of the Swiss Express". Newly tooled pantograph Many separately applied details such as the imitation of the automatic coupler The cab and engine room lighting can be controlled digitally Shunting, warning and wrong-line signals that can also be controlled Close couplers with a guide mechanism With a Märklin Spielewelt mfx+ digital decoder and a variety of light and sound functions Buffer height to NEM standards. With a buffer capacitor to bridge short sections without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Class Re 460 electric locomotive of the Swiss Federal Railways (SBB/CFF/FFS). Neutral fire red basic paint scheme. Locomotive name: "Toggenburg". Version with a raised logo on the front. Running number: 460 104. The locomotive looks as it did starting in 2025. Model With an mfx+ digital decoder and extensive sound functions. Regulated high-performance motor, centrally mounted. 4 axles powered. Traction tires. Triple headlights and 1 white marker light that change over with the direction of travel will work in conventional operation and can be controlled digitally. Swiss light changeover and white/red light changeover can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Long distance headlights can be controlled digitally. Cab lighting can be controlled digitally. Warning signal and authorization to proceed signal can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Delicate single arm pantographs. Applied metal grab irons. Length over the buffers approx. 21.3 cm. Highlights Version with a raised logo on the front Delicate single arm pantographs Four axles powered Cab lighting European and Swiss light changeover With a buffer capacitor for bridging short sections without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Class Be 4/6 electric locomotive of the Swiss Federal Railways (SBB). Rebuilt version until retirement. Basic fir green paint scheme with traffic gray running gear. With sleeve buffers. Cab doors on the sides and ends partially welded shut and without walkover plates. With sanding gear, an authorization to proceed signal and Integra Signum magnets. Cooling coils on the sides with 11 vertical brackets. Locomotive running number 12323. The locomotive looks as it did in the early 1970s. Model With an mfx+ digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Both driving wheels and the jackshaft in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and 1 white marker light (Swiss light changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. For running light, the lighting can be switched to 1 red marker light. Authorization to proceed signal can be controlled separately digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double A light function. Additional cab lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and machinery room interior details. With sanding gear on the driving wheel groups. Detailed roof equipment with heating resistors, roof wiring, insulators, lightning arrestor coils and roof walkways. Minimum radius for operation 360 mm. Brake hoses, imitation screw couplings and steps are included. Length over the buffers 18.9 cm. Highlights Prototypical changes in shape, such as cab doors on the ends and sides partially welded shut Changed version with 11 cooling coil brackets Highly detailed metal version Spielewelt mfx+ digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Additional red authorization to proceed signal can be controlled digitally With a buffer capacitor for bridging short sections without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Add-on cars for the RABe 501 "Giruno" high-speed multiple unit of the Swiss Federal Railways (SBB). 1 intermediate car B (B11), 2nd class, with a pantograph. 1 intermediate car C (B10), 2nd class. Matching EC 151, with a cross-border train route: Frankfurt/Main - Freiburg - Basel - Zürich - Milano Centrale. Train number RABe 501 022 with the coat of arms of the Swiss canton of Vaud. The cars look as they did around 2024. Model 2-part add-on car set to expand the RABe 501 "Giruno" high-speed multiple unit into an 11-part unit. Interior lighting fitted as standard with maintenance-free warm white LEDs. The interior lighting is supplied through the continuous electrical connection running the length of the entire train and only works and can be controlled digitally in combination with the base set. The pantograph on one intermediate car can likewise only be raised and lowered separately in combination with the base set, as a digital function by means of the decoder. Both intermediate cars are permanently coupled to each other. Guide mechanism in the Jacobs bogies. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the pair of cars 40.2 cm. Highlights LED interior lighting fitted as standard Pantograph can be raised and lowered separately as a digital function only in combination with the base set Cross-border train route: Frankfurt/Main-Freiburg-Basel-Zürich-Milano Centrale Matching add-on cars for train number RABe 501 022 Canton of Vaud Note The 39812 base set can be expanded with the 43451, 43452, and 43453 add-on car sets into a prototypical 11-part unit.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype 5 two-axle goods wagons of different designs. 1 covered goods wagon J2d with a brake cabin of the BLS. 1 covered goods wagon J3 with a brake cabin of the SBB. 1 covered goods wagon Typo F "Spitzdach" of the FS. 1 tank wagon as a privately owned wagon of the firm ERPAG AG, Basel. 1 covered goods wagon G 10 "München" of the DB. All of the wagons look as they did at the end of the 1940s / the beginning of the 1950s. Model The covered goods wagons J2d, J3, and G10 have sliding doors that can be opened. The tank wagon has a separately applied brake platform and steps. All of the wagons are individually packaged and marked. With an additional outer box. Total length over the buffers 58.5 cm. DC wheelset E700580 for each wagon. Highlights Matching goods wagons for the new tooling of the Ae 6/8 electric locomotive. Era-appropriate wagon consist Note The matching Ae 6/8 electric locomotive can be found in the Märklin H0 assortment under item no. 38680.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Class 186 electric locomotive of Akiem SAS, leased to SBB Cargo International. Light grey basic paint scheme with two differently designed side surfaces. Running number 186 904-9 "Ceneri". Operating condition from 2022. Model The locomotive has an mfx+ digital decoder and extensive sound functions. It also has a regulated, centrally mounted high-performance motor with a flywheel. All four axles are powered using cardan shafts. Traction tyres. Triple headlights and two red tail lamps that change over with the direction of travel, will work in conventional operation, can be controlled digitally. Long-distance headlights can be controlled. The headlights on locomotive side 2 and 1 can each be turned off separately digitally. Double "A" light function. Cab and driver's desk lighting can each be controlled separately digitally. Lighting with maintenance-free warm white and red LEDs. With a buffer capacitor. Many separately applied parts such as handrails, sand boxes, UIC sockets and roof cables. Detailed roof fittings with four newly tooled pantographs with different contact strips for use in Germany, Switzerland and Italy. Buffer height per NEM. Brake lines, screw couplers, sockets and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long-distance headlights, cab and driver's desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Many controllable shunting and special markers for Italy and Switzerland mfx+ digital decoder with extensive operating and sound functions Buffer height per NEM. With a buffer capacitor to bridge short stretches without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 2 on the shelf, shipped within 1-3 days
Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car D (B9), 2nd class with a pantograph. 1 intermediate car E (B8), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances suitable for the disabled and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the disabled and a pantograph. 1 end car L (At2), 1st class. Also intended for approval for Germany and Austria. Train number RABe 501 004. Presentation train, with a striking Switzerland/Italy design on the end cars. The train looks as it did around 2018/19. Model 7-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to each other by means of the Jacobs bogies. It has an mfx+ digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car are powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power is supplied by whichever end car is leading, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red marker lights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be switched to a single white marker light (Swiss lighting changeover). Other light functions can be controlled separately. Interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately in digital operation. All of the lighting uses maintenance-free warm white and red LEDs. The single-arm pantographs on the intermediate cars D, F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approx. 152 cm. Highlights LED interior lighting fitted as standard The cab lighting and the driver's desk lighting can be controlled digitally The single-arm pantographs on the intermediate cars D, F and H can be raised and lowered by means of a digital function Märklin Spielewelt mfx+ decoder with extensive light and sound functions Train number RABe 501 004 Note The 7-part base set 39811 can be expanded with the 2-part add-on car sets 43466 and 43467 to make a prototypical 11-part multiple unit.
- 3-rail, alternating current
- Digital
- Sound
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Type Db "Sputnik" freight train caboose of the Swiss Federal Railways (SBB/CFF/FFS). Basic fir green paint scheme. The car looks as it did starting in 1970. Model Underbody detailed specifically for this type of car, with many applied details. Buffer height to NEM standards. Separately applied grab irons, hand brake crank, gas box and roof vents. With interior details. Length over the buffers 10.5 cm. DC wheel set E700580. Highlights The ideal supplement for any SBB freight train Many separately applied details Buffer height to NEM standards
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Four-axle Fas type high-sided open wagon of SBB Cargo. High-sided open wagon with profile reinforcements on the wagon walls. Grey basic paint scheme. The wagon looks as it did starting in 2020. Model Detailed version as a high-sided open wagon with profile reinforcements on the wagon walls. Many separately applied parts. Y 25 type bogies. Length over the buffers 16.1 cm. DC wheelset E700580. Highlights Many separately applied parts Version with profile reinforcement on the wagon walls
Pre-order
Prototype Class Ae 6/8 electric locomotive of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Dark brown basic paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With bridging plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and louvred ventilation grilles on each side. Locomotive running number 207. Operating condition at the end of the 1940s / beginning of the 1950s. Model The locomotive has an mfx+ digital decoder and extensive sound and light functions. It also has a regulated, centrally mounted high-performance motor with a flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. Triple headlights and 1 white tail lamp (Swiss lighting changeover) that change over with the direction of travel, will work in conventional operation, can be controlled digitally. The lighting can be changed over to 1 red tail lamp when running solo. Wrong-line signal can be controlled separately digitally. The headlights on locomotive side 2 and 1 can each be turned off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Lighting with maintenance-free warm white and red LEDs. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version Märklin Spielewelt mfx+ digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short stretches without power Buffer height per NEM Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment.
- 3-rail, alternating current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Class Ae 610 electric locomotive of the SBB Cargo. Ultramarine blue/fire red basic paint scheme. Running number 610 519-1 with the town coat of arms of Giubiasco. The locomotive looks as it did starting in 2005. Model The locomotive has an mfx+ digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles powered in each of the two bogies. Traction tyres. Triple headlights changing over with the direction of travel and one white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. Other separately controllable light functions: switching over to one red tail lamp, switching over to two red tail lamps, switching over to the warning signal and the shunting light. The cab lighting and the engine room lighting can be controlled separately in digital operation. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many applied details such as metal handrails. Close coupler mechanism. Closed covers for the pilot are included as separately plug-in parts. Length over the buffers 21 cm. Highlights Centrally mounted motor with drive on four axles Cab and engine room lighting can be controlled digitally Numerous light functions can be controlled separately in digital operation Many separately applied details Close coupler mechanism mfx+ digital decoder with extensive operating and sound functions With a buffer capacitor to bridge short dead spots
- 3-rail, alternating current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Goods train electric locomotive, class Ce 6/8 I "Köfferli", of the Swiss Federal Railways (SBB). Fir green basic paint scheme with grey running gear. Cab doors at the ends with windows and with bridging plates, with a sanding system, with a wrong-line signal and with Integra-Signum magnets. Locomotive running number 14201. The locomotive looks as it did at the beginning of the 1950s. Model The locomotive has an mfx+ digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. 3 driving wheels and a jackshaft in each of the two drive bogies are powered using cardan shafts. Traction tyres. Articulated running gear able to negotiate tight curves. Triple headlights and 1 white tail lamp (Swiss lighting changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when running light. The wrong-line signal can be controlled digitally, separately. The headlights on locomotive ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. Additional cab lighting and engine room lighting can each be controlled digitally, separately. Lighting with maintenance-free warm white and red LEDs. With a buffer capacitor. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Reproduction of the cab and the engine room. With a sanding system at the driving wheel groups. Detailed roof equipment with heating resistors, roof lines, insulators and roof walkways as well as scissors pantographs with double contact strips. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings as well as steps are included. Length over the buffers 22.1 cm. Highlights Tooling variation with prototypical changes for the "Köfferli" in a fir green colour scheme Highly detailed metal version Märklin Spielewelt mfx+ digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power
- 3-rail, alternating current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Electric locomotive, class Be 6/8 II "Krokodil", of the Swiss Federal Railways (SBB). Type from the first production batch. Fir green basic paint scheme. With 2 cab doors, wide shunters' steps on the bonnets and bow-shaped grab rails, sleeve buffers, without bridging plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has an mfx+ digital decoder and extensive sound functions. 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each of them. Traction tyres. Articulated running gear able to negotiate tight curves. Triple headlights and 1 white tail lamp (Swiss lighting changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when running light. Lighting with maintenance-free warm white and red LEDs. Highly detailed metal version with many separately applied details. 3-part locomotive body with bonnets that swing out. Detailed roof equipment with safety grilles beneath the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunters' steps Locomotive with 2 high-performance drives and a flywheel Märklin Spielewelt mfx+ digital decoder with extensive operating and sound functions
- 3-rail, alternating current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Low-floor transport wagon of the Xaadkms type of the BLS AG. Special wagon used as a works service wagon for transporting road vehicles needed at railway construction sites. Agate grey basic paint scheme. The wagon looks as it did starting in 2025. Model Wagon body made of metal. With two buffer beams that can be swung out and removed. A retaining wedge for lorry models, a special coupler for low-floor wagons and special close couplers for coupling to vehicles with a normal coupler are included. Can also be coupled to vehicles with buffer height according to NEM. Length over the buffers 23.2 cm. DC wheelset E432950. Highlights Wagon body made of metal Special close coupler also suitable for vehicles with a lower buffer height
In stock: 1 on the shelf, shipped within 1-3 days
Model Edition of the first Crocodile prototype ever produced at Märklin for H0 gauge, from 1936, as the 2025 trade fair locomotive in the house colours of the trade fair locomotive series. Chassis and body constructed of die-cast zinc. Both bogies powered, with jackshafts and coupling rods. An mfx decoder is installed at the factory, so the locomotive can also be used on present-day layouts. Due to the reproduction of the historical sample, sufficient clearance gauge must be ensured. Light changeover; the locomotive can be operated in analogue. Sprung roof pantographs without an electrical function. Length over the buffers 21 cm. Highlights Edition of the Crocodile pre-production prototype for H0 gauge from the 1930s in the colours of the trade fair locomotive series - not to be confused with the colour scheme of many a steam locomotive! 2025 trade fair locomotive Die-cast zinc With an mfx decoder Note Originally, the model of the Crocodile in H0 was already planned in 1936; it was to come onto the market under the item number CCS 700 and, to help sales, was to be exhibited even then at trade fairs such as the Leipzig Spring Fair. Yet - not least due to the circumstances of the time - it remained a prototype. This pre-production prototype has now been chosen to enrich the series of Märklin trade fair locomotives in the corresponding black and red colour scheme and to keep alive the feeling of model railway play from times long past. The locomotive builds a bridge between the eras, so that it can also be understood as a tribute to the model railway trade fairs of that time and is part of the proof of how long the hobby of "model railways" has already existed.
- 3-rail, alternating current
- Digital
On order, shipped within 10-15 days
Prototype Ee 3/3 series electric shunting locomotive of the Swiss Federal Railways (SBB/CFF/FFS). Fire red basic paint scheme. Second production series from 1932, with the cab located in the middle. 2 shunting platforms. Locomotive running number 16352. The locomotive looks as it did around 2005. Model The locomotive has an mfx digital decoder and a miniature motor with a flywheel. 3 axles and a jackshaft powered. Traction tyres. The triple headlights and 2 white tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. In addition, the Swiss lighting changeover, with one white tail lamp when the locomotive is running with wagons and one red tail lamp when the locomotive is running on its own, can be controlled digitally. Double "A" light function. The lighting uses maintenance-free warm white and red LEDs. It has the new Telex coupler at the front and rear, each of which can be controlled separately in digital operation. Coupler waltz. Applied roof equipment. Applied metal grab rails. Brake hoses and prototypical couplers can be plugged into the buffer beam. Length over the buffers 11.2 cm. Highlights New Telex coupler, separately controllable digitally for each end of the locomotive Additional coupler waltz function
- 3-rail, alternating current
- Digital
Pre-order, release expected in 2027
Prototype Ae 3/5 electric locomotive of the Swiss Federal Railways (SBB/CFF/FFS). With bridging plates on the ends and a wrong-line signal above the upper headlight. Fir green basic paint scheme with grey running gear. Locomotive running number 10217. The locomotive looks as it did in 2022. Model The locomotive has an mfx+ digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a flywheel. One axle powered. Traction tyres. The triple headlights that change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched to 1 red tail lamp when running as a light engine. The wrong-line signal can be controlled separately digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double "A" light function. Additional cab lighting, driver's desk lighting, flashing at the switchgear and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. The locomotive has a buffer capacitor. Highly detailed metal construction with many separately applied details. Cab and engine room reproduction. Detailed roof equipment with roof lines, insulators and roof walkways as well as a scissors pantograph. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers approx. 12.8 cm. Highlights Completely new tooling Highly detailed metal construction Märklin Spielewelt mfx+ digital decoder with extensive light and sound functions Cab, driver's desk and engine room lighting can be controlled digitally Flashing at the switchgear can be controlled digitally With a buffer capacitor for bridging short sections without power Buffer height to NEM standards
- 3-rail, alternating current
- Digital
- Sound
Pre-order, release expected in December 2026