Accessories in N scale
N-Train, scenery and catenary in 1:160
Pallets, benches, building sites and parcel trolleys, plus SBB and BLS, DB and SNCF catenary masts and precision wheelsets: N-Train dresses your N layout down to the last detail.
- 313items in the shop
- 1:160for your N layout
- SBB and BLSSwiss catenary in 1:160

What makes N-Train
- Everyday scenery: pallets, benches, bins, cement mixers, site barriers… in 3D-printed plastic, in N scale (1:160).
- SBB and BLS catenary: H-masts with Gotthard, FL-140 or early cantilevers, portals for 2 to 6 tracks: everything for a Swiss line in N.
- Photo-etched brass: the masts are photo-etched brass with 3D-printed details, supplied assembled and painted. A decorative, non-working catenary, compatible with Realflex wire.
- Model Fab Trains, near Barcelona: N-Train is a brand of Model Fab Trains in Martorell, Spain, like Mafen and 87Train. It has been making accessories since 2008.
The N-Train families
Scenery and parts
184 itemsScenery accessoriesPallets, benches, bins, building site, garden: life around the line.See the items
14 itemsRailings and barriersBrass railings and fences, traffic barriers.See the items
11 itemsWheelsetsSets of 10 wheelsets with one insulated wheel, sized for Roco, Arnold, Fleischmann, Minitrix…See the itemsCatenary, railway by railway
All N-Train items
Set of elastic thread and metal hangers for N scale catenary, in ten sections. The light-coloured thread is wound on a clear plastic reel marked "REALFLEX system". The hangers come on a photo-etched metal fret whose zones are lettered S, M, L and XL along the edge. The set is packed in a card box with a clear window.
On order, lead time to be confirmed
Two RENFE catenary masts with CR-160 brackets in N scale. The mast is a regularly perforated profile standing on a light concrete base; the bracket carries brown insulators and a fine registration arm. The finish is painted metallic grey. The photograph shows one mast erected at the trackside.
On order, lead time to be confirmed
RENFE catenary masts with CR-160 bracket, N scale. The drawing details two mast versions, five of each, plus one further single part. The lattice masts stand on a square base with a locating pin, and the bracket carries an insulator at its upper end.
On order, lead time to be confirmed
Set of four RENFE tensioning masts in N scale. The shafts are of perforated profile and stand on a concrete base with a square footing. The photographs show two configurations: one with two spoked pulleys and two stacks of ribbed counterweights guided along the shaft, the other with a double bracket carrying four brown insulators and registration arms. The finish is metallic grey.
On order, lead time to be confirmed
RENFE catenary gantry in size S for N scale. It consists of two perforated profile masts on concrete bases and a horizontal lattice beam with cross bracing. Brackets with a black insulator and a fine registration arm fit beneath the beam. The parts are in a silver metallic finish, the bases concrete grey.
On order, lead time to be confirmed
RENFE catenary gantry in size M for N scale. Two perforated profile masts on concrete bases carry a horizontal lattice beam; the photograph shows four brackets fitted beneath it. Each bracket has a black insulator and a fine registration arm. The close-up also shows the beam stayed by a thread tensioned from the mast head.
On order, lead time to be confirmed
RENFE catenary gantry in size L for N scale. Two perforated profile masts on concrete bases carry a horizontal lattice beam whose top side has moulded hooks at regular intervals. The photograph shows four brackets fitted beneath it, each with a black insulator and a fine registration arm. The parts are in a silver metallic finish.
On order, lead time to be confirmed
RENFE catenary gantry in size XL for N scale. Two perforated profile masts on concrete bases carry a horizontal lattice beam; the photograph shows five brackets fitted beneath it, three on the left and two on the right, with a clear span in the middle. Each bracket has a black insulator and a fine registration arm. The parts are in a silver metallic finish.
On order, lead time to be confirmed
Six RENFE brackets for catenary gantries in N scale. Each bracket combines a perforated fixing plate, a horizontal arm with diagonal stay and a fine registration arm; two black insulators are fitted. The parts come in both handings, three of each. The finish is silver metallic; the photograph shows the parts separately on a white background.
On order, lead time to be confirmed
RENFE buffer stop in N scale. The model has a wedge-shaped body with a vertical front face and a sloping rear, painted concrete grey. A red-brown beam runs along the top of the front face and carries two black buffers. The photograph shows the finished painted part on its own against a white background.
On order, lead time to be confirmed
Six RENFE ASFA balises in N scale. Each balise consists of a flat, elongated light-brown plate carrying a small black housing with moulded top detail, set off-centre. The six parts are shown in the photograph loose and already detached, on a white background.
On order, lead time to be confirmed
RENFE track convergence markers in N scale. The six parts are white with three black transverse bands. They come still attached to their moulding sprue and are separated one by one for fitting.
On order, lead time to be confirmed
Modern RENFE buffer stop in N scale. The wedge-shaped block is painted concrete grey, with a vertical front face notched in the middle and a sloping rear hollowed by a longitudinal channel. A light brown beam runs along the top of the front face and carries two black buffers. The side faces have a granular texture.
On order, lead time to be confirmed
Modern RENFE buffer stop in N scale with red and white warning markings. The wedge-shaped block is painted concrete grey, notched at the centre of the front and hollowed by a longitudinal channel at the rear. The upper beam is painted red with diagonal white stripes and carries two black buffers.
On order, lead time to be confirmed
Modern RENFE buffer stop without buffers, in N scale. The wedge-shaped block is painted concrete grey, notched at the centre of the front and hollowed by a longitudinal channel at the rear. The upper beam is painted red with diagonal white stripes and carries no buffer heads. The side faces have a granular texture.
On order, lead time to be confirmed
Modern RENFE buffer stop without buffers, in N scale, with yellow and black markings. The wedge-shaped block is painted concrete grey, notched at the centre of the front and hollowed by a longitudinal channel at the rear. The upper beam is painted yellow with diagonal black stripes and carries no buffer heads.
On order, lead time to be confirmed
Two lattice masts with bracket in N scale, DRG version. The mast is a diagonally braced lattice profile painted dark green. The bracket is stayed by a fine tie rod and ends in a dark finned insulator; a fine registration arm with its own insulator is fitted lower down. The photograph shows one mast erected against the sky.
On order, lead time to be confirmed
Ten lattice masts with bracket in N scale, DRG version. The mast is a diagonally braced lattice profile painted dark green. The bracket is stayed by a fine tie rod and ends in a dark finned insulator, with a fine registration arm lower down. The photograph shows one mast erected against the sky.
On order, lead time to be confirmed
Two DB lattice masts with Re160 bracket, size S, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The bracket is made of fine tubes forming a triangle and bears on two dark brown insulators at the mast; a fine registration arm runs beneath it. The photograph shows one mast erected at the trackside.
On order, lead time to be confirmed
Two DB lattice masts with Re160 bracket, size S, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The bracket is made of fine tubes forming a triangle and bears on two dark brown insulators at the mast; a fine registration arm runs beneath it. The photograph shows one mast erected at the trackside. The photograph shows the standard version: the base shown is NOT the Unitrack base of this variant.
On order, lead time to be confirmed
Ten DB lattice masts with Re160 bracket, size S, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The triangulated tubular bracket bears on two dark brown insulators at the mast, with a fine registration arm beneath. The photograph shows one mast erected at the trackside.
On order, lead time to be confirmed
Ten DB lattice masts with Re160 bracket, size S, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The triangulated tubular bracket bears on two dark brown insulators at the mast, with a fine registration arm beneath. The photograph shows one mast erected at the trackside. The photograph shows the standard version: the base shown is NOT the Unitrack base of this variant.
On order, lead time to be confirmed
Two DB lattice masts with Re160 bracket, size M, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The tubular bracket bears on two dark brown insulators at the mast; the fine registration arm ends in a hook. The photograph shows one mast erected at the trackside.
On order, lead time to be confirmed
Ten DB lattice masts with Re160 bracket, size M, in N scale. The mast is a ladder-type lattice profile with horizontal rungs, painted dark green. The tubular bracket bears on two dark brown insulators at the mast, and the fine registration arm ends in a hook. The photograph shows one mast erected at the trackside.
On order, lead time to be confirmed
