Scenery accessories
Twelve blue water crates in N scale. The dark blue crates have widely pierced walls with visible vertical uprights and hold translucent light blue bottles. Their structure differs from the beer crates in the same range: instead of a cut hand hole, the panels between the uprights remain open.
In stock: 5 on the shelf, shipped within 1-3 days
Twelve metal rubbish bins in N scale. The slightly tapered bins have a vertically fluted body with a reinforcing band, a ribbed conical lid with a central knob and two moulded side handles. The models are a uniform silvery metallic shade, without lettering; the lids are moulded in one piece with the body.
In stock: 5 on the shelf, shipped within 1-3 days
Three parcel-loaded trolleys in N scale. The wire-mesh roll containers on four castors are filled with cardboard boxes of various sizes, stacked without order. The parcels are finished in a uniform light brown.
In stock: 5 on the shelf, shipped within 1-3 days
Silver-finished metal drums in N scale, supplied painted. The cylindrical body carries rolling ribs, top and bottom are closed, and bungs can be seen on some lids. The drums are used loose, as a load or to detail a storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Ten pallets in N scale in a light wood tone. The deck is moulded as individual boards, open above and below. Raised lettering is moulded on the side rail. The pallets are separate, loose pieces.
In stock: 5 on the shelf, shipped within 1-3 days
Six wooden barrels and six wooden crates in N scale, supplied painted. The barrels are bulged, with clearly moulded staves and hoops in dark brown; the crates are closed, light beige, with a horizontal plank texture. The set is used as a load or to dress a loading dock or storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Six beer kegs and six red bottle crates in N scale, supplied painted. The kegs are silver-finished with ribbed bodies and domed tops; the crates are red, with moulded recessed handles on the sides and closely packed brown bottle necks. The parts serve as a load or to dress a loading dock or backyard.
In stock: 5 on the shelf, shipped within 1-3 days
Six beer kegs and six green bottle crates in N scale, supplied painted. The kegs are silver-finished with ribbed bodies and domed tops; the crates are green, with moulded recessed handles on the sides and closely packed light green bottle necks. The parts serve as a load or to dress a loading dock or backyard.
In stock: 5 on the shelf, shipped within 1-3 days
Sacks in N scale, moulded in a uniform ivory shade. Each sack is bulged at the base and narrows at the top into a tied neck; the surface is slightly grainy and carries no lettering. In the photograph the sacks are grouped in heaps; they are used as a load or to dress a loading dock or store.
In stock: 5 on the shelf, shipped within 1-3 days
Gas cylinders in N scale, supplied painted. The body is slender and cylindrical with a rounded shoulder, the neck and valve picked out in silver. The cylinders come in four colours: yellow, white, black and red. They can be placed upright or lying down, as a load or to detail a workshop or storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Five concrete Jersey barriers in N scale, with the classic profile: wide base, sloping flank and vertical upper part. The surface is matt and slightly grainy in a greyish white imitating bare concrete, and the base is pierced with lifting recesses. The elements are not all the same length, four long and one distinctly shorter, and butt together end to end.
In stock: 5 on the shelf, shipped within 1-3 days
Six plastic Jersey barriers in N scale, three red and three white. The surface is smooth and glossy; a recess is moulded in the middle of the top and openings appear at the foot of the flanks. All six elements are the same length and line up end to end to form a barrier run.
In stock: 5 on the shelf, shipped within 1-3 days
Nine two-wheeled wheelie bins in N scale in muted colours: six dark grey and three brown. The body widens towards the top, the flat lid overhangs and matches the body colour, and two small wheels are moulded at the bottom rear. One bin carries a small circular relief on the front, too small to be read at this scale.
In stock: 5 on the shelf, shipped within 1-3 days
Hydrants in N scale. The photograph shows pillar hydrants with side outlets and a domed cap. The parts are uniformly red, with no further colouring.
In stock: 5 on the shelf, shipped within 1-3 days
Air conditioning units in N scale. The photograph shows box-shaped housings with a grille rendered as a regular dot pattern on one face. The set includes several sizes; the parts are pale, ranging from white to ivory, and undecorated.
In stock: 5 on the shelf, shipped within 1-3 days
Tall bollards in N scale. The photograph shows four dark bollards with a slender ringed shaft, square base and a capped head on a pale presentation plate. A translucent unpainted figure serves as a size reference. The quantity stated in the manufacturer's name cannot be checked from the image.
In stock: 5 on the shelf, shipped within 1-3 days
Temporary fencing in N scale. The photograph shows open mesh panels in a pale beige tone, each standing on a very light grey concrete foot with two sockets. The panels are set out in two partly overlapping rows.
In stock: 5 on the shelf, shipped within 1-3 days
Post boxes in N scale. The photograph shows five yellow boxes of rectangular section with softened corners, each carried on a grey post for pole mounting. On one of them the posting slot and a moulded band are visible on the front face; no lettering can be read from the image.
In stock: 5 on the shelf, shipped within 1-3 days
Electric generators in N scale. The photograph shows two box-shaped models with a red canopy, moulded ventilation louvres on the sides and a dark frame on small feet. A lifting eye is moulded on the roof. The two examples differ in their side detailing.
In stock: 5 on the shelf, shipped within 1-3 days
Etched-metal ladder set in N scale. It comprises two leaning ladders of different lengths, a two-section extension ladder with foot bar, a double ladder with rungs on both sides, three stepladders, two of them with a platform and tall grab handle, and a two-step stool with a ribbed platform. The parts are carried on three photo-etched frets in wood brown, silver and black.
In stock: 3 on the shelf, shipped within 1-3 days
Three drinking fountains in N scale. The black fluted column is topped by a pointed capital and carries a small brass-coloured tap; a black basin sits against the column. The white fluted base is elongated with a rounded end.
In stock: 3 on the shelf, shipped within 1-3 days
Basketball hoops in N scale. The light grey post is cranked over towards the backboard; the white board has a black surround and a black target rectangle, and the ring is orange. No net is fitted. The set contains two hoops.
In stock: 3 on the shelf, shipped within 1-3 days
Roll containers in N scale. The mesh panels with rectangular openings close two or three sides depending on the unit; they sit on a slatted base running on four castors. The parts are very finely made and look bare metallic grey, with no top coat visible.
In stock: 3 on the shelf, shipped within 1-3 days
Galvanized steel wheeled containers in N scale. The photograph shows three identical containers in a uniform metallic grey, each on four light-coloured swivel castors. The domed, ribbed lid has a central handle and is shown open on one of the containers; the side wall carries a round loading flap with a handle. The second image is a 3D rendering of the same container.
In stock: 3 on the shelf, shipped within 1-3 days