G scale
Built around 1870, the Clear Water Station is presented in a typically American Victorian style. The weatherproof kit shows signs of weathering. Doors and windows can be opened and closed.
In stock: 1 on the shelf, shipped within 1-3 days
For the power supply of the G controller #35002, weatherproof. Primary: 230 V AC Secondary: 22 V/100 VA DC Note IP 67: This power supply is designed for garden railway operation so that it meets the IP protection classes of DIN EN 60529. It is completely protected against touch and the ingress of dust as well as against the ingress of water during temporary immersion. Dimensions of the item: L x W x H = 230 mm x 110 mm x 80 mm
On order, lead time to be confirmed
For the power supply of the G controller #35002, weatherproof. Primary: 230 V AC Secondary: 22 V /36 VA DC Note IP 67: This power supply is designed for special garden railway operation so that it meets the IP protection classes of DIN EN 60529. It is completely protected against contact and the ingress of dust as well as against the ingress of water during temporary immersion.
On order, shipped within 4-5 days
Input: max. 22 V DC, 1.6 A Output: 0-22 V DC, 1.6 A constant 16 V DC, 0.4 A
On order, shipped within 4-5 days
With the R/C speed controller, you can conveniently operate your layout (track) via radio instead of a conventional speed controller. Connected accessories can be switched on and off. A single button press can trigger an emergency stop. Electronic speed controller for analogue operation (power supply via 35005 power supply unit – not included). Contains R/C receiver from #35040. Additionally, transmitter #35041 is required! This is essential for control. Number of channels: 8. Speed levels: 28. Frequency band: 2.4GHz. Range: up to 40 m. Voltage supply: 16-24V DC. Dimensions: approx. 110x103x60 mm. Weight: approx. 150 g.
On order, lead time to be confirmed
A problem-free operation can only be guaranteed when used in conjunction with the PIKO 35000 power supply. The control unit must be powered exclusively by a DC power supply. The digital control unit is the core of the digital control system for Gauge G. It can deliver up to 5 A at 22 V to the track. This allows longer trains with multiple locomotives to be controlled simultaneously on garden railway layouts. The digital control unit operates according to the NMRA-DCC standard and is therefore also compatible with DCC decoders from other manufacturers. Stop and reset buttons enable very simple operation. The operating status is indicated by LEDs. Connection is made conveniently via 4 push-in terminals. Control can be carried out either wired via the Navigator (35037) or wirelessly via radio with the Navigator (35037) and radio receiver (35038). - Power supply 16-24 V DC - Track voltage max. 22 V DCC - Max. total current 5 A regulated - Overload, short-circuit and temperature monitoring - 9999 locomotive addresses - 14, 28 and 128 speed levels - 2048 point addresses - 2048 feedback addresses - Functions F1 - F16 - up to 30 bus devices can be connected - Illuminated "Emergency Stop" button - Illuminated "Reset+Program" button - Splash-proof thanks to cover flaps
On order, lead time to be confirmed
The weatherproof point decoder is used for the digital control of point motors. One decoder can control up to four points. The point decoder is suitable for drives with two connections (e.g. PIKO 35271 with motor coil) or for double-coil drives. Control is via an NMRA-DCC digital central station (e.g. PIKO 35010).
On order, shipped within 4-5 days
Item no.: 35015
On order, lead time to be confirmed
The splash-proof point decoder is used for the digital switching of a G point motor (PIKO #35271). It plugs directly into the motor. The connection is made directly from the track using the 35270 connection terminals, which makes long and complicated wiring unnecessary.
On order, shipped within 4-5 days
The PIKO Pendulum Automation kit contains: a splash-proof electronic unit insulated fishplates connection terminals with cable This allows you to run your train back and forth between two stations. It features: acceleration and braking delay adjustable waiting time at the stations overload and short-circuit protection Warning! This product cannot be used with digital multi-train systems.
On order, lead time to be confirmed
Replaces the hand controller #35017. The Navigator is the control unit for the Digital Central Station (35010) or the analogue speed controller (35002). The large illuminated display enables very simple and clear operation. Two functions (e.g. running a locomotive and switching a point) can be controlled simultaneously. The design was created so that almost all functions can be operated with one hand. Thanks to the built-in radio transmitter, you can move freely around your garden railway layout in combination with the radio receiver (35038) and the controller. The display of locomotive symbols and freely selectable names makes the management of locomotives very easy. Further functions such as routes, multiple unit operation and decoder programming are included. The Navigator can optionally be connected to the Digital Central Station with the enclosed cable. * Real graphics display with backlight * Integrated radio transmitter * Display of locomotive image, locomotive name, direction of travel, speed levels, active functions * Two functions controllable simultaneously * Simple management of locomotives through the display of locomotive symbols and freely selectable names * Functions F1 - F16 switchable * Additional functions such as routes, multiple unit operation and decoder programming * Cable and radio operation for radio operation the receiver 35038 is also required - does not work with the old radio receivers 35012 / 35018
On order, lead time to be confirmed
Replaces the radio receiver #35018. The radio receiver converts the radio data from the Navigator into digital or analogue signals for the Digital Central Station (35010) or the analogue speed controller (35002). Thanks to its bidirectional FM radio technology, the radio receiver operates very reliably even over longer distances (approx. 100 m). A plug-in aerial is included. Using the enclosed bus cable, the radio receiver is connected directly to the Digital Central Station or the analogue speed controller. The receiver is splash-proof. Works only with the Navigator 35037.
On order, lead time to be confirmed
The comfortable wireless remote control for installation in your locomotives. Child’s play, wireless train control without a digital system. The locomotive radio receiver (#35040) offers all the operating features of the analogue control units of the #35008 set, plus some extras: the locomotive radio receiver features a handy design and fits in most garden railway locomotives. It also has 2 function contacts, which serve, among other things, to activate the horn/whistle and bell on a separate sound module. The receiver is designed for battery operation (batteries not included). Alternatively, the receiver can also be operated with a DC power source (voltage of 7–22 volts), e.g. the voltage present on the track. The receiver has connections for the motor/light as well as the two function outputs. With the locomotive radio receiver (#35040) and your battery-powered garden railway locomotive, you can control the train from anywhere – e.g. on dirty or power-free track! Remote control Number of channels: 8 Frequency band: 2.4 GHz Range: up to 30 m Power supply: 1x 3 V CR2025 (included) Dimensions: approx. 68x36x16 mm Weight: approx. 30 g Centre rail plate Number of channels: 8 Speed levels: 14 (at 7–16 V) 28 (at 16–24 V) Frequency band: 2.4 GHz Range: up to 30 m Power supply: 7 – 24 V DC / 6 – 18 V AC Dimensions: approx. 69x29x15 mm Weight: approx. 40 g
On order, shipped within 4-5 days
Additional remote control for the #35008 Analog Remote Control Set or the #35040 Locomotive Radio Receiver. Perfect for more than one user or as a replacement for defective remote controls. Eight selectable radio channels enable operation by multiple users and the control of several trains. Features button-controlled operation of the two functions of the locomotive radio receiver (#35040), as well as control of functions such as horn/whistle and bells. Radio range of up to 30m, whether indoors or outdoors. Batteries not included in the delivery. Number of channels: 8 Frequency band: 2.4GHz Range: up to 30m Power supply: 1x 3V CR2025 (included in the delivery) Dimensions: approx. 68x36x16 mm Weight: approx. 30 g
On order, lead time to be confirmed
Item no.: 35042
On order, lead time to be confirmed
New for 2026: 35051 PIKO G-SmartController wlan The PIKO G-SmartController wlan is an ergonomic hand controller for the wireless control of garden railway layouts. The layout can be operated flexibly via wlan, allowing free movement along the track. Its graphical colour display provides a comfortable overview with all the necessary information. In conjunction with the PIKO G-SmartControl wlan 35055 or the PIKO G-SmartAnalogController wlan 35053, the controller enables intuitive control of digital and analogue central units. Ergonomic hand controller with clear controls Wireless control for maximum freedom of movement Compatible with PIKO G-SmartControl wlan: up to 4 controllers per central unit Compatible with PIKO G-SmartAnalogController wlan: control of up to 4 analogue central units Pack contents: 1x PIKO G-SmartController wlan 1x Lithium-ion battery 1x USB A to USB C charging cable
On order, lead time to be confirmed
New for 2026: 35052 PIKO G-SmartBooster 5A The PIKO G-SmartBooster 5A provides additional power for electrically isolated track sections and ensures stable, safe operation. It supports DCC including RailCom and RailCom Plus, enabling vehicles to be automatically detected within the booster circuit.
Pre-order, release expected in November 2026
New for 2026: 35053 PIKO G-SmartAnalogController wlan The PIKO G-SmartAnalogController wlan is a powerful, electronic local speed controller for the analogue operation of garden railways. It provides an adjustable driving current of 0–20 V DC up to 5 A and a separate 16 V DC fixed-voltage connection for lighting or accessories. The controller is wlan-capable and compatible with the PIKO G-SmartController wlan 35051, which enables the wireless control of up to 4 speed controllers. A switched-mode power supply 100 VA / 22V (e.g. PIKO 35000) is required for the voltage supply. Pack contents: 1x PIKO G-SmartAnalogController wlan 1x track connection adapter 1x power supply adapter 1x USB A to USB C cable
On order, lead time to be confirmed
New for 2026: 35054 PIKO G-SmartAnalogController wlan to Go. The PIKO G-SmartAnalogController wlan to Go combines the PIKO G-SmartAnalogController wlan with a PIKO G-SmartController wlan. The set enables direct wireless control of the analogue layout and is ready for use immediately. This allows train operation and lighting to be controlled flexibly and independently of stationary control units. Up to four PIKO G-SmartAnalogController wlan units can be controlled via one PIKO G-SmartController wlan, with registration via Fast Connect taking next to no time. A switched-mode power supply 100 VA / 22V (e.g. PIKO 35000) is required for the power supply. Pack contents: 1x PIKO G-SmartAnalogController wlan, 1x PIKO G-SmartController wlan incl. lithium-ion battery, 1x track connection adapter, 1x power supply adapter, 1x USB A to USB C cable.
On order, lead time to be confirmed
New for 2026: 35055 PIKO G-SmartControl WLAN Set The PIKO G-SmartControl WLAN Set enables the wireless control of locomotives, points, signals and routes using an ergonomic hand controller. The central unit is ready for immediate use and supports DCC including RailCom and RailCom Plus for automatic locomotive registration. Locomotives can be programmed independently, while routes, accessories and signals can be switched comfortably.
On order, lead time to be confirmed
Straight track G-G320 - length 321.54 mm G-G320 + G-G280 result in a module length of 600 mm Only available in packing unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G280 - length 278.46 mm G-G280 + G-G320 result in a module length of 600 mm Only available in packaging unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G160 - length 160.77 mm 2x G-G160 make up the track G-G320 Only available in packing unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G140 - Length 139.23 2x G-G140 make up the track G-G280 Only available in packing unit (PU). PU 12
On order, shipped within 4-5 days