Locomotives
Electric locomotive 186 906 “RAlpiercer” of the leasing company Akiem, rented out to SBB Cargo International. Baptised with the name “Katzenberg” Side walls feature different designs Service in international freight transport With separately attached plug-in parts, in part using etching technology Design with snow plough on the chassis Switchable high beam and individually switchable headlight or tail light in digital mode In cooperation with Railcolor Design The Akiem locomotives 186 901 – 910 have run for SBB Cargo International since December 2020, and are mainly used in RoLa transport between Freiburg and Novara. Due to this, all ten 186 locomotives bear the Ralpin AG lettering on one side and a revision of the existing Alppiercer design on the other. The “Katzenberg” emblem created especially for the locomotive depicts the south portal of the 9.38 km long tunnel, which is located just past the Swiss border and has been a part of the expansion project Basel - Karlsruhe since 2012, when it was put into operation. The Katzenberg tunnel between Bad Bellingen and Effringen Kirchen is one of many strategically important tunnel constructions on the North-South corridor of SBB Cargo International and RAlpin AG.
In stock: 4 on the shelf, shipped within 1-3 days
Steam locomotive 230 F 607 of the National French Railways. Edition model! Form variation! Design featuring short chimney Finely-detailed model with many separately attached plug-in parts Wheels with fine spokes Design with rivet tender and Wagner smoke deflectors With switchable driver’s cab and valve gear lighting in digital mode With dynamic steam for even more authentic steam emission from the chimney The P 8 was a general-purpose locomotive, and was deployed for all kinds of trains. After the turmoil resulting from the two World Wars, they were used by almost all European railway administrations. They were to be found in Belgium, Denmark, France, Greece, Italy, Yugoslavia, Lithuania, Luxembourg, the Netherlands, Austria, Poland, Romania, Czechoslovakia and the Soviet Union. In 1919, 162 locomotives were sent to France, of which 25 went to AL, 25 to EST, 75 to NORD, 17 to ETAT (as 230.943-959, all 1940s phased out except for the 943) and 20 to MIDI. In 1945, the SNCF received four more machines as the spoils of war.
- 3-rail, alternating current
- Sound
In stock: 4 on the shelf, shipped within 1-3 days
Diesel locomotive Am 847 957 “Lotti” (ex DB 211 215) of Sersa AG. ■ Finely detailed model with many separately applied plug-in parts ■ Free cab view ■ Suitable for the Digital railway slewing crane item no. 73039 and construction train set item no. 77043 After the withdrawal of the V 100 class from Deutsche Bundesbahn, a few locomotives were also purchased by Sersa AG. The Swiss railway technology group specialises in track superstructure.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive 193 701 “Ruhrpiercer” of the MRCE, rented out to SBB Cargo International LED headlights which change according to driving direction (3x white at front, 1x white at rear). In digital mode, light functions can be switched acc. the Swiss archetype. Baptised with the name “Ruhrgebiet” Side walls feature different designs for the SBB subsidiary RT&S Finely detailed model with four pantographs Cross-border service in freight transport Free-standing handle rails, in part made from metal In cooperation with Railcolor Design With the MRCE Vectron 193 701, SBB Cargo International has once again produced a special locomotive which is dedicated to its subsidiary, RT&S. Two different designs featuring tourist attractions and content typical for the region were created for the company, which is based in Duisburg. One side focuses on the historic past of the region’s industry, and the other depicts the Ruhrgebiet as it can be seen today. To match the design, the locomotive has been fitted with emblems especially designed for it at all four corners, presenting a combination of the striking RT&S and SBB Cargo Deutschland headquarters office building in Duisburg and the logo for coal and mining.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive 193 701 “Ruhrpiercer” of the MRCE, rented out to SBB Cargo International Baptised with the name “Ruhrgebiet” Side walls feature different designs for the SBB subsidiary RT&S Finely detailed model with four pantographs Cross-border service in freight transport Free-standing handle rails, in part made from metal With switchable high beam and individually switchable headlight or tail light and driver’s cab lighting in digital mode In cooperation with Railcolor Design With the MRCE Vectron 193 701, SBB Cargo International has once again produced a special locomotive which is dedicated to its subsidiary, RT&S. Two different designs featuring tourist attractions and content typical for the region were created for the company, which is based in Duisburg. One side focuses on the historic past of the region’s industry, and the other depicts the Ruhrgebiet as it can be seen today. To match the design, the locomotive has been fitted with emblems especially designed for it at all four corners, presenting a combination of the striking RT&S and SBB Cargo Deutschland headquarters office building in Duisburg and the logo for coal and mining.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive 475 902 of Widmer Rail Services (WRS). LED headlights that change over with the direction of travel (3x white at the front, 1x white at the rear).
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive Re 4/4 II 11108 “Swiss Express” of the Swiss Federal Railways. New design! 1st type series of the class Re 4/4 II Featuring separately attached plug-in parts, in part using etching technology Design in current operating condition with air-conditioning system Rectangular lamps Individually switchable headlight or tail light, driver’s cab lighting and engine room lighting in digital mode Z21 driver’s cab available On 22nd May 1975, the train category “Swiss Express” belonging to the Swiss Federal Railways (SBB) was introduced in conjunction with the commissioning of the Heitersberg line, and remained in existence until the year 1982. This category replaced the former city express trains. At the time, these trains were considered a showpiece for the SBB and operated on the most important transport axis from Geneva to St. Gallen. The trains were hauled by eight Re 4/4 IIs equipped especially for the purpose. Sadly, only the 11108 and the 11109 still bear the original livery. The Re 4/4 11108 represents a particularly popular locomotive. The “Cream cake”, as it was lovingly nicknamed, was regularly operated until the year 2021, after which it was put onto the sidings in Olten. Here it awaits further use.
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive 186 905 of Crossrail Used in international freight transport With separately attached plug-in parts, in part using etching technology Design with snow plough on the chassis Switchable high beam and individually switchable headlight or tail light in digital mode The former leasing company CB Rail S.à r.l., based in Luxembourg, was the second customer to order 25 TRAXX MS2e (multi-system) locomotives from Bombardier. Ten of these locomotives were to be equipped with D-A-CH-I country packages. The ten locomotives were given the numbers 186 901-910 when they were delivered to CB Rail. The locomotives were sold to Macquarie European Rail in 2013 and to the current owner Akiem in 2020. The 186 901-910 were the first TRAXX F140 MS2e with Swiss approval to be used in commercial operation. The first seven locomotives with the numbers 186 901-907 appeared in regular Swiss service at the beginning of 2008. CB Rail leased the light grey and white class 186s to the Swiss company Crossrail AG. The numbers 186 908-910 were leased to the Italian company Linea S.p.A. and were used for freight transport within Italy. It was not until April 2014 that the three locomotives were also transferred to Crossrail. The entire locomotive fleet was leased to Crossrail until 2017, before being leased to TXL for another 3 years with CR lettering. From 2021, the locomotives were transferred to SBBCI, which meant that the last locomotives also lost their Crossrail lettering. The 186 905 was the only locomotive to retain the white running number on the front from the time of delivery to the very end. The Crossrail lettering also remained on the locomotive until the end of 2020.
- 3-rail, alternating current
- Sound
In stock: 2 on the shelf, shipped within 1-3 days
Electric locomotive 193 491 of the logistics company Hupac Intermodal. Model with rich detailing and four pantographs True to original model with long gutter and raised driver's cabs for the use in Italy Freestanding handles partially made of metal In cooperation with Railcolor Design Sound in cooperation with Leosoundlab The Swiss logistics company for combined transport "Hupac" has ordered eight freight locomotives of the type Vectron MS from Siemens. The multi-system vehicles enable Hupac's co-operators to act as global players and to couple the European economic areas through the new Gotthard Base Tunnel. Since January 2019 the locomotives 193 490 and 491 have the official Hupac design.
In stock: 2 on the shelf, shipped within 1-3 days
Diesel locomotive 212 053 of the German Federal Railway. With new running number Perfectly matches the crane train Model equipped with PluX22 Interface and LED headlights In the 1950s, the Deutsche Bundesbahn developed a diesel locomotive type programme for the renewal of their vehicle fleet. The main goal was the replacement of the steam traction on the still quite extensive local lines. For the mixed branch line service, the single-engine V 100 series with 1100 hp engines was developed. Parallel to these V 100.10 were delivered from 1962 to 1965 a total of 380 machines equipped with 1350 hp engines as V 100.20. With the introduction of the computer number, the series designation of the more powerful machines has been changed to 212. After the classic red colour, numerous machines received from 1974/75 a ocean blue / beige coating. After the decommissioning of numerous branch lines, the classic field of use of the V 100 shrank as well. Suburban transport and transfer trains were still on the mission programme. Some machines were used in the construction train service. Numerous locomotives found new owners, among others at the NE railways and track construction companies in Germany and abroad.
In stock: 1 on the shelf, shipped within 1-3 days
Diesel locomotive Am 847 957 "Lotti" (ex DB 211 215) of Sersa AG. ■ Finely detailed model with many separately applied plug-in parts ■ Free cab view ■ Compatible with Digital railway slewing crane item no. 73039 and construction train set item no. 77043 ■ In digital operation with switchable long-distance headlight and individually switchable head or tail lamp After the withdrawal of the V 100 class at Deutsche Bundesbahn, a few locomotives were also purchased by Sersa AG.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 485 012 of the Swiss railway company BLS Cargo. ■ Version in the current Alpinist livery ■ Pantograph with innovative mounting ■ Extra plug-in parts ■ Rail guards mounted on the chassis ■ Switchable headlights and tail lamps with DIP switch In 2001, BLS Lötschbergbahn AG decided to order ten Traxx locomotives for cross-border freight traffic.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 193 312 of the DB Cargo. Elaborate printing of the “Das ist grün” design Features prototypical high control panel design in the driver’s cab Service in international freight transport Free-standing handle rails, in part made from metal Switchable high beam and individually switchable headlight or tail light and driver’s cab lighting in digital mode DB Cargo also ordered Vectron locomotives in response to increasing freight transport demand. In 2018, DB Cargo received a total of 60 locomotives with the country packages for Germany, Austria, Switzerland, Italy and the Netherlands. This made it possible for DB Cargo trains to travel continuously without changing locomotives for the first time since the schedule change 2018/2019 - for example on the route from Rotterdam to Verona. Since 2020, these locomotives have also been fitted with the country package for Belgium.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 193 658 of MRCE, leased to SBB Cargo International, named “Vierwaldstättersee” (Railcolor design, names and outlines of Swiss lakes at the four corners). Finely detailed model with four roof pantographs and free-standing grab rails, some made of metal. In digital operation, switchable long-distance headlight as well as individually switchable headlights/tail lamps and cab lighting. DC, sound decoder (PluX22), 4 axles powered, 1 traction tyre, flywheel, buffer capacitor, LED lighting, NEM-362 coupling with close coupling mechanism, minimum radius 358 mm, length over the buffers 218 mm, Era VI.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 186 906 “RAlpiercer” of the leasing company Akiem, rented out to SBB Cargo International. Baptised with the name “Katzenberg” Side walls feature different designs Service in international freight transport With separately attached plug-in parts, in part using etching technology Design with snow plough on the chassis Switchable headlight/tail light with DIP switch In cooperation with Railcolor Design The Akiem locomotives 186 901 – 910 have run for SBB Cargo International since December 2020, and are mainly used in RoLa transport between Freiburg and Novara. Due to this, all ten 186 locomotives bear the Ralpin AG lettering on one side and a revision of the existing Alppiercer design on the other. The “Katzenberg” emblem created especially for the locomotive depicts the south portal of the 9.38 km long tunnel, which is located just past the Swiss border and has been a part of the expansion project Basel - Karlsruhe since 2012, when it was put into operation. The Katzenberg tunnel between Bad Bellingen and Effringen Kirchen is one of many strategically important tunnel constructions on the North-South corridor of SBB Cargo International and RAlpin AG.
In stock: 1 on the shelf, shipped within 1-3 days
High-speed steam locomotive 18 201, coal-fired of the railway company of the German Democratic Republic (Deutsche Reichsbahn). Drive on two axles of the tender and via cardan shaft on all three locomotive driving axles. Edition model! Form variation! Update! Prototypical implementation of the design with coal firing For the first time with PluX16 interface and LED lighting Trim line with triple tip Finely-detailed metal wheelsets Smoke generator can be retrofitted The Halle Research Institute needed another high-speed steam locomotive to test new passenger coaches in the 1960s. The new engine 18 201 was created from high-speed tender locomotive 61 002 and parts of high-pressure test locomotive H 25 024. The steam generator was a modified new boiler construction of the class 22 with an extended smoke chamber and Giesl ejector. The machine was equipped with a counter-pressure brake to ensure that the speed was maintained precisely when travelling at high speed. Fast travel meant up to 175 km/h, because the 18 201 was initially approved for this maximum speed – later 180 km/h – but of course only forwards.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive class 89.70–75 of the German Federal Railway. Ideal locomotive for use on branch lines LED lighting Metal die-cast undercarriage With switchable sound functions From 1882 to 1910, approximately 1,550 tender locomotives of type T3 in different designs were supplied to the Prussian State Railway (K.P.E.V.) and other state railways. As type Cn2, the M III-4p design of the locomotive had a friction load of 36 tonnes and could travel at a maximum speed of 40 km/h with an output of 300 HPi. Around 70 locomotives remained with the German Federal Railway. The last locomotives were taken out of service around 1961.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive class PtL 2/2 "Glaskasten" of the Royal Bavarian State Railway. Model with authentic sound functions Authentic livery with fine decorative lines Used at the head of passenger and light goods trains on branch lines The local railway locomotive designated PtL 2/2 (a passenger tender locomotive for branch lines) is undoubtedly one of the most iconic steam engines of the past, especially among railway enthusiasts. Affectionately known by regional nicknames such as 'Glaskastl,' 'Schnauferle,' 'Quietscherle,' and 'Bockl,' it holds a special place in railway history. With a rated power output of 210 hp, it was officially approved for a top speed of 40 km/h: though, according to accounts from train drivers, it often reached 60 km/h or more in actual service.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive 230 F 607 of the National French Railways. Edition model! Form variation! Design featuring short chimney Finely-detailed model with many separately attached plug-in parts Wheels with fine spokes Design with rivet tender and Wagner smoke deflectors Driver’s cab and valve gear lighting installed, switchable in digital mode The P 8 was a general-purpose locomotive, and was deployed for all kinds of trains. After the turmoil resulting from the two World Wars, they were used by almost all European railway administrations. They were to be found in Belgium, Denmark, France, Greece, Italy, Yugoslavia, Lithuania, Luxembourg, the Netherlands, Austria, Poland, Romania, Czechoslovakia and the Soviet Union. In 1919, 162 locomotives were sent to France, of which 25 went to AL, 25 to EST, 75 to NORD, 17 to ETAT (as 230.943-959, all 1940s phased out except for the 943) and 20 to MIDI. In 1945, the SNCF received four more machines as the spoils of war.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive double traction Re 10/10 of the Swiss Federal Railways. Tooling variant! ■ Anniversary edition of 1982 “100 Years Gotthard Railway” ■ Consisting of Re 6/6 11626 and Re 4/4ˡˡ 11323 ■ Both locomotives powered ■ With front crests and raised locomotive numbers ■ Fine, separately applied ventilation grilles and windscreen wipers made of etched metal To mark the 175th anniversary of the railway in Switzerland, ROCO presents as a special edition the Re 10/10 pair in anniversary version.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive Re 420 257 of the SBB Cargo. Elaborate printing Finely-detailed, separately attached ventilation grilles and windscreen wipers made from etched sheet Pantographs with invisible fastening Design with retrofitted air conditioning Light functions in accordance with the Swiss prototype Z21 driver’s cab available Since September 2020, the Re 420 257 has been advertising the environmentally-friendly collaborations in recycling economy between the companies SBB Cargo, ACTS and Spross. This recycling economy is characterised by the efficient use of raw materials for as long a period as possible. If material and product cycles are successfully closed, then raw materials can be repeatedly reused. Both the environment and the economy profit from this achievement.
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 193 491 of the logistics company Hupac Intermodal. ■ Finely detailed model with four pantographs ■ Prototypical with long rain gutters and high driver's cabs for use in Italy ■ Free-standing grab rails, partly in metal ■ In cooperation with Railcolor Design ■ Sound in cooperation with Leosoundlab The Swiss logistics company for combined transport Hupac ordered eight Vectron MS freight locomotives from Siemens.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 475 902 of Widmer Rail Services (WRS). ■ Model exclusively available from ROCO ■ Intricate printing with a paper-cut motif ■ Prototypical with a long rain gutter and high driver’s cabs for use in Italy ■ Free-standing grab rails, partially made of metal ■ In digital operation, light functions can be switched according to the Swiss prototype. With the Vectron locomotives Re 475 901 and 902, Widmer Rail Services put two more multi-system locomotives into service.
In stock: 1 on the shelf, shipped within 1-3 days
Diesel locomotive 68540 of the French State Railways. Version as a museum locomotive Finely detailed ventilation grilles Triple headlights With set of etched coat of arms included Headlights/taillights switchable with a DIP switch Between 1963 and 1968, 29 locomotives of the A1A-A1A 68500 series were built for heavy passenger and freight transport for the French state railways (SNCF). They differed from the 80 units of the A1A-A1A 68000 series built in parallel only in their AGO V 12 DSHR engines from SACM, which, like their sisters with Sulzer 12 LVA 24 engines, had an output of 2,700 hp at the beginning of their service life. Over time, the SNCF converted A1A A1A 68000 into A1A A1A 68500 in its workshops by replacing the diesel engine to counteract the maintenance difficulties of the Sulzer engine, resulting in A1A A1A 68530 to 68540. The current locomotive with the running number 68540 was delivered to the SNCF in 1965. It was built by CAFL (mechanical part), CEM (electrical equipment) and CCM Sulzer (diesel engine) as A1A-A1A 68039. In December 2002, the Sulzer engine was replaced by an AGO V12 engine, which had an output of 2,150 hp compared to the Sulzer engine with 2,420 hp, and the locomotive was renumbered A1A-A1A 68540 accordingly. In 2011, the locomotive was entrusted by the SNCF to the AAATV Centre Val-de-Loire association, which returned it to its historic blue livery. In this condition, the locomotive is still in use to haul special trains.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days