Goods wagons H0
Prototype Low-floor transport wagon, type Saadkms, of RAlpin AG (Olten), for the transit traffic of the "Rollende Landstraße". Quartz grey basic paint scheme. The wagon looks as it did starting in 2018. Model Wagon body of metal. Intermediate wagon without buffer beams. Chocks for lorry models and a special coupler for low-floor wagons are included. Length 21.4 cm. AC wheelset E363630. Highlights Wagon body of metal Intermediate wagon to extend the train consist
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: The container flat wagon set consists of two 2-axle container flat wagons of type Lgs 580. Both wagons in traffic red basic paint scheme. Deutsche Bahn AG (DB AG). Wagons loaded with 40 ft box containers of different companies. Operating condition of Era VI. Highlights Lgs 580 container flat wagon as new tooling. Wagons and containers with different running numbers. Wagons and containers with signs of weathering. Ideal wagons for complete container trains, for example also as a supplement to container flat wagon set 47580. Product description Model: Lgs 580 wagon with chequer plate represented as a cover plate on the wagon body. Fitted grab handle in the raised position on the shunting steps. Fitted access ladder and rope anchors with protective tubes on the longitudinal beam. One wagon with and one without a handwheel for the ground-operated parking brake. The wagons are loaded with removable 40 ft box containers of different companies. Wagons and containers with different running numbers and signs of weathering. Total length over the buffers approx. 32.6 cm. AC wheelset per wagon E700150. You will find another container flat wagon set as a supplement in the Märklin H0 range under item number 47580, with details of the DC wheelsets required.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Open goods wagon twin unit Laabs for container transport (coupled Klms 440 ex Rmrso 31) of the German Federal Railway (DB), leased to Volkswagen AG (VW). Version without a hand brake, with container support frames and Volkswagen transport containers as the load. The wagons look as they did around 1971. Model Container transport wagons with truss rods and different identification numbers. Loaded with a total of six Volkswagen transport containers with different container numbers. Overall length over the buffers approx. 28.2 cm. AC wheelset E700150. Trix Express wheelset E258259. Highlights Loaded with a total of six Volkswagen transport containers Transport containers with different running numbers Note Offically licensed by Volkswagen.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Set consisting of two type Res-x four-axle low side cars of the German Railroad, Inc. (DB AG). Standard European design 19.90 m long. Basic red-brown paint scheme. The cars look as they did starting in 2018. Model Underbody detailed specifically for this type. Type Y25 trucks. Many applied details. Both cars loaded with a replica rail load. Cars individually packaged in an additional outer box. Length over the buffers approx. 46 cm / 18-1/8". AC wheel set E700150. Highlights For the 20th anniversary of the Trix C Track Different design as a Res-x prototypically without stakes Both cars loaded with a "rails" load insert Many separately applied details
In stock: 2 on the shelf, shipped within 1-3 days
Prototype 6-axle articulated double pocket wagon, type Sdggmrss S269 (T3000e), of VTG AG. Modern carrier wagon for combined freight traffic. Cobalt blue basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2023. Loaded with three 20ft. swap bodies of the Planzer haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. Holders for kingpins in high and low versions and air tanks for the wagon ends are included as separate plug-in parts. Loaded with three 20ft. swap bodies of the Planzer haulage company. Length over the buffers 39.3 cm. AC wheelset E376938. Highlights Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with three swap bodies
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Tank wagon with two wheelsets of BOLTE & Co. Kg Hannover, registered with the Deutsche Bundesbahn (DB). Version with a riveted tank. With brake platform, without brake cabin. Running number 564 041. The vehicle looks as it did in 1957. Model Detailed chassis with an open-work frame. Finely reproduced and separately applied hand brake crank, braking system and discharge pipes. Applied working platform with access. Applied brake platform, without brake cabin. With slot-guided close couplings. Length over the buffers approx. 10.1 cm. AC wheelset E700150. Highlights Finely reproduced and separately applied braking system
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Four-axle tank wagon of type Zacns with a capacity of 95 m3. Privately owned wagon of Ermewa S.A.S., registered in the Czech Republic. Graphite grey basic paint scheme. Operating condition starting in 2015. Highlights Detailed design with numerous separately fitted levers and handrails Product description Model: Bogies of the modern design type Y25Lsd1 with double brake blocks. With brake platform and end access. Separately fitted brake rigging, discharge pipes, dome covers, deflector bars and numerous other levers and handrails. Metal deflector bars. Length over the buffers approx. 19.6 cm. AC wheelset E700150. You will find another tank wagon with a different running number in the Märklin H0 range under item number 47547, with details of the replacement wheelsets required.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Type Sdggmrss (T3000e) 6-axle articulated double pocket car of Hupac AG. Modern transport car for combined freight traffic. Version with four folding side latches. The car looks as it did starting in 2019. Loaded with two curtain-sided semi-trailers of the Schöni shipping company. Model Both halves of the transport car made of metal, mounted movably on the middle truck. Folding side latches installed at the factory. Can be raised for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab bars on the car ends. Type Y25 trucks. Buffer height to NEM standards. Kingpin holders in high and low versions, switching steps and air tanks for the car ends are included as separate parts to be plugged in. Loaded with two curtain-sided semi-trailers of the Schöni shipping company. Length over the buffers approx. 39.3 cm / 15-1/2". AC wheel set E376938. Highlights Detailed version made largely of metal Folding latches installed and working Many separately applied details Buffer height to NEM standards. Loaded with two semi-trailers
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Short Bavarian goods wagon with brake cabin of the Royal Bavarian State Railways (K.Bay.Sts.B.). Version as a beer transport wagon of the "Bayerische Staatsbrauerei Weihenstephan". Highlights As part of the 500th anniversary of the German Beer Purity Law. Product description Model: Authentic livery of Era I. Delicate design of the running gear and body. Spoked wheels. Coupling pocket to NEM and close coupling mechanism. Length over the buffers 81 mm. E34301211 Märklin AC wheelset (burnished spokes, conductive). E34382604 Märklin AC wheelset (grey spokes, non-conductive). E36669300 Trix Express wheelset. The beer transport wagon 33916 is being produced in 2016 in a one-off edition for Trix Club members only.
In stock: 1 on the shelf, shipped within 1-3 days
Club members only (Trix Club)
Prototype: 2-axle covered van of type G10 with standard brake cabin and spoked wheels. Registered with the K.W.St.E. Era I. Product description Model: Two-axle privately owned goods wagon with fictitious lettering of the Salacher Papierfabrik. The model is without end panel reinforcements and corresponds in paint scheme and printing to Era I. With close coupling mechanism. Length over the buffers 11.0 cm. AC wheelset E34301211. The covered van 24820 is being produced in 2020 in a one-off edition for Trix Club members only.
In stock: 1 on the shelf, shipped within 1-3 days
Club members only (Trix Club)
Prototype Set consisting of five American freight cars of different types of the Southern Pacific. Three single-door boxcars, one stock car and one tank car. The cars look as they did around 1948. Model Frame and floor made of metal. Detailed trucks with special wheel sets. Boxcars and stock car with sliding doors that can be opened. Roof walkways, ladders, brake gear and other details separately applied. Couplers can be replaced. All cars individually packaged in an additional outer box. Total length over the couplers approx. 76 cm / 29-15/16". AC wheel set: E320551. DC wheel set E320389 (RP25). Highlights Attractive Southern Pacific design Many separately applied details Boxcars and stock car with sliding doors that can be opened
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Four goods wagons of different types of the German Federal Railway (DB). One type LPwPost branch line baggage van, one type Gmhs 53 covered van, one type Omm 37 open goods wagon and one type Rlmms 56 stake wagon. The wagons look as they did at the end of the 1950s. Model Branch line baggage van with many applied details. Covered van with a barrel roof and panelled side walls. Open goods wagon with wooden side boards and double-leaf side doors. With a load insert representing scrap. Stake wagon with separately applied truss rods. Loaded with logs. Separate plug-in stakes are included. All wagons individually packaged in additional outer packaging. Overall length over the buffers approx. 50.5 cm. AC wheelset E36667900 (baggage van), E700150. Highlights Authentic branch line goods train Two wagons with a load
On order, shipped within 10-15 days
Prototype Self-unloading hopper wagon set Tds of the Czech company Railco A.S. Set consisting of three pairs of wagons permanently coupled on the prototype. The wagons look as they did in 2019. Model Finely detailed version with many applied details. Separately applied chute extension. Movable swivel roof. The pairs of wagons are connected with a fixed screw coupler. Length over the buffers per wagon approx. 11.2 cm, per pair of wagons approx. 22.5 cm. AC wheelset E700150. Highlights Movable swivel roof covers Wagon type ideal for use in block trains Very finely detailed version
On order, shipped within 10-15 days
Prototype Four type Ks 3300 or Ks 3301 cars with swiveling stakes of the German State Railroad (DR/GDR). Basic red-brown paint scheme. The cars look as they did around 1980. Model All cars with separately applied brake gear, brake controls and swiveling stakes. One stake on each side of the car is printed with the car's running number. Load surface with a wooden plank look. Receptacles on the ends for inserting the included stakes. Buffer height to NEM standards. Ks 3300 with a separately applied underframe beam, in a version without a brakeman's platform and with long end stakes. Rectangular buffer plates. Ks 3301 with separately applied truss rods, in a version with a hand brake platform on the end and short end stakes. Round buffer plates. Buffer height to NEM standards. Each car loaded with two Skoda LIAZ 706 tractors. Chocks and end stakes are included. Models of the tractors from the firm Brekina. Total length over the buffers approx. 65 cm / 25-9/16". DC wheel set E700580. Highlights Folding swiveling stakes One stake on each side of the car printed with the car's running number Many applied details Buffer height to NEM standards. Attractive load
On order, shipped within 10-15 days
Prototype Two goods wagons of different types of the Hungarian State Railways (MÁV). A two-axle swivelling stanchion wagon of type Ks and a two-axle high-sided open wagon of type Es. Oxide red basic paint scheme. The vehicles look as they did at the end of the 1970s. Model Swivelling stanchion wagon with separately applied truss rods and long end stakes. With separately applied braking system, brake controls and swivelling stanchions. Loading area with a wooden plank look. Pockets at the ends for fitting the stanchions that are included. Buffer height to NEM. Round buffer heads. High-sided open wagon with truss rods. Both wagons individually packed in additional outer packaging. Total length over the buffers approx. 27.4 cm. AC wheelset E700150. Highlights Folding swivelling stanchions Many applied details Wagons individually packed in additional outer packaging
Pre-order, release expected in Q1 2027
Prototype Car transporter wagon, type Laaes 541, of the German Federal Railway (DB). Double-deck version. The wagon looks as it did around 1971. Model Fixed close coupler between the wagon halves. The upper deck can be lowered. New running number. Loaded with 8 different models of the VW Type 3 1500 and 1600 from the firm Brekina. Suitable chocks are included. Length over the buffers 25.3 cm. AC wheelset E700150. Highlights New model car load, VW Type 3 1500 and 1600
On order, shipped within 10-15 days
Prototype 6-axle double pocket wagon with articulation, type Sdggmrss (T3000e), of TX Logistik AG. Modern carrier wagon for combined freight traffic. Deep black basic paint scheme. Version with four hinged side latches. The vehicle looks as it did starting in 2020. Loaded with two curtain-sided semi-trailers of the haulage company Paneuropa. Model Both carrier wagon halves are metal, movably mounted on the central bogie. Hinged side latches fitted at the factory. Can be folded up for the transport of containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Y25 type bogies. Buffer height to NEM. Kingpin holders in high and low versions as well as air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-sided semi-trailers of the haulage company Paneuropa. Length over the buffers 39.3 cm. AC wheelset E376938. Highlights Detailed version largely made of metal Hinged latches fitted and functional Many separately applied details Buffer height to NEM.Loaded with two semi-trailers
Pre-order, release expected in Q1 2027
Prototype One goods wagon and four passenger coaches of different types of the German Federal Railway (DB). One Gmms 44 covered van, one four-axle second class rebuilt coach with a baggage compartment BD4yge, two four-axle second class passenger coaches B4ye of the standard design, and one four-axle second class rebuilt coach B4yge. Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln. The passenger coaches are in a bottle green basic paint scheme. The Gmms 44 is in red brown. Model Each passenger coach has LED interior lighting and a buffer capacitor fitted as standard. The seating coaches are fitted with a total of 20 miniature figures from the Preiser company. Total length over the buffers approx. 103 cm. Highlights The passenger coaches have LED interior lighting and a buffer capacitor as standard Fitted with a total of 20 miniature figures from the Preiser company Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln One-time series The 23508 passenger train with a goods wagon is being produced in 2025 in a one-time series exclusively for Trix Club members only. Note The matching 66 002 steam locomotive is also being offered exclusively for Trix Club members only under item number 25660.
Prototype 6 four-axle, high-capacity, open self-unloading hopper wagons of the type Falns 182 of Deutsche Bahn AG (DB AG). Used to transport bulk goods that are not sensitive to moisture. Red brown basic paint scheme. All wagons with 2 transition platforms. 3 wagons with a hand brake on one transition platform and 3 wagons without a hand brake. Type 665 bogies. The wagons look as they did around 2015. Model Self-unloading hopper wagons in a true-to-scale and detailed version, with many applied details. 6 different running numbers. All wagons with 2 applied transition platforms each and 3 wagons with a hand wheel for the hand brake at wagon end 2. Prototypically, both long sides of the wagons are each without access holes on the upper body and without grab handles. Self-unloading hopper wagons loaded with load inserts and real coal. All wagons in the set individually packaged. Buffer height according to NEM. Length over the buffers per wagon 14.4 cm. AC wheelset per wagon E700150. Highlights New tooling for the Falns 182 self-unloading hopper wagons True-to-scale version in 1:87. Many applied details. 6 different running numbers Loaded with load inserts and real coal Ideal for block trains Buffer height according to NEM. Sold individually from a wagon set Note The matching heavy class 151 goods train electric locomotive can be found under item no. 25652, also in the Trix H0 range.
Prototype 10 four-axle high-capacity self-unloading hopper wagons of the type OOt Oldenburg of the Deutsche Reichsbahn-Gesellschaft (DRG). Version with a brake platform on the end and a hand wheel at one end of the wagon as well as with signal supports on the ends of the upper body. Representation of the radial axles. Used to transport coal. The wagons look as they did at the end of the 1920s / beginning of the 1930s. Model Detailed version of the visually striking rows of rivets and signal supports on the upper body. Imitation of the radial axles. Different running numbers. All wagons with a brake platform and a hand wheel on the end at one end of the wagon. Loaded with load inserts and real coal with a true-to-scale grain size. Length over the buffers per wagon 11.5 cm. AC wheelset per wagon E700150. Highlights New tooling for the OOt Oldenburg high-capacity self-unloading hopper wagon Detailed version of the striking rows of rivets Separately applied signal supports on the ends Load inserts loaded with real coal Many different running numbers In use for block trains Buffer height according to NEM One-time series The high-capacity self-unloading hopper wagon set will be produced in 2025 in a one-time series exclusively for Trix Club members. Note The matching heavy class E95 goods train electric locomotive is offered under item no. 25950 and a prototypically matching goods brake van under item no. 24987, also exclusively for Trix Club members in 2025.
Club members only (Trix Club)
Prototype 6-axle articulated double pocket wagon, type Sdggmrss, with curved side surfaces, of MFD Rail GmbH. Modern carrier wagon for combined freight traffic. Granite grey basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. A mount for a support trestle, holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Completely new tooling Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers
Prototype 6-axle articulated double pocket wagon, type Sdggmrss (T3000e), of CFL Cargo. Modern carrier wagon for combined freight traffic. Pure green basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. Holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers
Prototype 2-axle tank wagon with a hand brake platform and an access ladder at the end. Privately owned wagon of Damman & Lewens, Hamburg, registered with the German Federal Railway. The wagon looks as it did starting in 1965. Model Applied brake platform with an access ladder and a filling platform. Reproduction of the open-work wagon floor. Length over the buffers approx. 10.0 cm. AC wheelset E36667900. Note This tank wagon is produced exclusively for Trix Club members with 5 years of membership.
Club members only (Trix Club)
Prototype Pocket wagon, type Sdgkms. Red brown basic paint scheme. Operating condition 2000. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Model Frame, floor and load pockets of metal. Many applied details. Special bogies of low design. Rectangular buffers. The load holders are adjustable. Holders and a trailer support stand are included. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Length over the buffers 19.0 cm. AC wheelset E321973. Highlights With an attractive load Detailed version largely of metal Many separately applied details One-time series The pocket wagon is produced exclusively for Trix Club members with at least 25 years of membership.
Club members only (Trix Club)