Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessory decoders

Filter products
8-fold point decoder for solenoid point motors
YaMoRC YD8008
8-fold point decoder for solenoid point motors

Specially designed to cope with, high-current, solenoid point-motors, the YD8008 is our 8-fold solenoid decoder with intelligent CDU. It presents the following features: - Eight independent 9.5Amp solenoid outputs - Smart, 9400 uF CDU, monitoring charge levels for safe and powerful switching - Only 380 mA power consumption during charging - Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address - No complicated CV settings. - Clear-text configuration based upon our new ES-Link technology. With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface. No need for PC-software or Phone/Tablet Apps ! - or - when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration. - Eight address to output mappings, each mapping can a free choice address which can switch any and every output - Sequential output activation based upon pulse time and CDU charge level. - CDU startup delay adjustable to prevent tripping short circuit protection in boosters - Very modest power supply requirements. Even for SEEP/Gaugemaster motors a 15V/500mA wall wart is more than enough. - Not suitable for motorized point motors. For these motors, use our YD8116. This also counts for MTB point motors. - For two-wire solenoid motors, like Kato, adapter YD6940 should be used.

Regular price: CHF 68.00

In stock: 2 on the shelf, shipped within 1-3 days

4-fold point decoder with common crossing polarisation
YaMoRC YD8044
4-fold point decoder with common crossing polarisation

Specially designed to cope with, high-current, solenoid point-motors, the YD8044 is our 4-fold solenoid decoder with CDU and Frog Supply. It presents the following features: - Four independent 9.5Amp solenoid outputs - Smart, 9400 uF CDU, monitoring charge levels for safe and powerful switching - Only 380 mA power consumption during charging - Frog polarization through a 2 Amp relay which switches together with the solenoid outputs - Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address - No complicated CV settings. - Clear-text configuration based upon our new ES-Link technology. With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface. No need for PC-software or Phone/Tablet Apps ! - or - when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration. - Four address to output mappings, each mapping can a free choice address which can switch any and every output - Sequential output activation based upon pulse time and CDU charge level. - CDU startup delay adjustable to prevent tripping short circuit protection in boosters - Very modest power supply requirements. Even for SEEP/Gaugemaster motors a 15V/500mA wall wart is more than enough. - Not suitable for motorized point motors. For these motors, use our YD8116. This also counts for MTB point motors. - For two-wire solenoid motors, like Kato, adapter YD6940 should be used.

Regular price: CHF 69.00

On order, shipped within 3-8 days

16-channel switching decoder
YaMoRC YD8116
16-channel switching decoder

The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder. It presents the following features: - Sixteen independent 2.5Amp MOSFET outputs - Max 5 Amp combined current - Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address - No complicated CV settings. - Clear-text configuration based upon our new ES-Link technology. With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface: No need for PC-software or Phone/Tablet Apps!. - or - when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration. - All of the 16 outputs are freely configurable from 16x simple on-off to complex and elaborate signals with up to 8 LEDs/lamps - Each defined device (signal, switch, turnout) can have its own address - Devices can be operated by the new DCCext standard or conventional turnout DCC-commands (throw/close) - Numerous predefined signal definitions for Dutch, German (H/V, Ks and Form) British and Swiss prototypical signals - Signals can include fading (Bulbs emulated in case of LEDs) dark-phase inclusion, black-out based on previous signal’s state - Outputs can be time-limited e.g. for light coil-motors - Settable night-dimming for the complete decoder, with configurable address / decoder - Very suitable for motorized point motors. - Not suitable for solenoid point motors. For these motors, use our YD8008/YD8044. - For two-wire motorized point motors, like Conrad; Hoffmann; Tillig; etc. adapter YD6940 should be used. How to configure the YD8116 with Viessmann signals and ECoS

Regular price: CHF 68.00

On order, shipped within 3-8 days

4-channel servo decoder
YaMoRC YD8248
4-channel servo decoder

The YD8248 is a DCC decoder for RC servos with a throw of 90° or 180°; linear and continuous servos are also controlled. Four servos can be connected directly from the factory, and with two YD8291 expansion modules, up to twelve can be used. Eight switching outputs are pre-assigned for light signals from the factory and can be used for common crossing polarisation with the YD8290 expansion. The servos can also be controlled without a digital central station using push buttons or potentiometers via eight digital inputs and four analogue inputs. The starting address is assigned using the programming button, and addresses 1 to 8 are pre-assigned from the factory. Further configuration is carried out via ES-PGM Link. It is not intended for motorised point motors. 4 servo outputs, expandable to 12 8 switching outputs, short-circuit-proof up to 2.5 A Address range 1 to 2048 Supply 12 to 19 V DC recommended

Regular price: CHF 74.00

On order, shipped within 3-8 days