Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Command stations, boosters and power supplies

Filter products
Switched-mode power supply, 15 V DC output, for booster and central station
YaMoRC YD7460-15
Switched-mode power supply, 15 V DC output, for booster and central station

The YD7460-15 is a switched-mode power supply with 15 V DC voltage and 4 A output for YaMoRC digital central stations and boosters, for example YD7010 or YD7403. According to the manufacturer, the 15 V version is suitable for Gauge TT and smaller gauges. The power supply is double-insulated (Protection Class 2), short-circuit and overload protected, and does not heat up when the central station or booster is idle. It has a compact design and a two-core low-voltage cable instead of a thin coaxial cable. It was manufactured in accordance with the manufacturer's specifications to match the YaMoRC boosters and central stations. Output 15 V DC, 4 A Protection class 2 Short-circuit and overload cut-off

Regular price: CHF 37.50

In stock: 1 on the shelf, shipped within 1-3 days

New
DCC digital command station with WLAN and LAN
YaMoRC YD7010
DCC digital command station with WLAN and LAN

Building on the immense succes of our YD9401 upgrade for the DR5000, we decided to bring a complete Command Station, the YD7010, that includes the proven YD7001 technology and YD9401 Network Module. The command station is based on the technology used in our YD7001-E, but with a completely new designed mainboard, with improved component choice and PCB layout to render robustness and extended functionality. Of course the YD7010 comes with our YD9401 is pre-installed. Further we improved some visual and usability aspects: Different colors for the RJ connectors which were easy to confuse when they were all gray. Now the XBus and Network sockets have different colors to the ES-Link/s88N, LocoNet and BBus connectors. On the front we moved the GO- and STOP-LEDs to be in-line with all LEDs and that prevents touching and/or damaging the LEDs when operating the pushbuttons. On the back we moved the RS-Bus and Program-Track terminals into one 4-way block. This effectively prevents the terminals of turning and, worst case, shearing off ! The product placement of the YD7010 in our portfolio is meant to be an Entry Level, yet very complete and versatile DCC command station. A summary of the presented features: - Unique DCC signal generator: – With priority control and interleaved packet generation. – Changes sent by any interface are directly being reflected to the track. – Generates RailCom Cut-Out. - 3 A integrated Booster - Operating voltage range from 15 – 19 VDC. Giving a track-voltage of 13.8 – 17.8 Volts. That means safe for your N-scale equipment and powerful for H0. - Multiple Model Railroad compatible Interface Busses: – LocoNet, the world standard set by Digitrax Inc. – XpressNet, from the inventor of DCC: Lenz – Good old S88 signalling, fully compatible with ES-IN-Link by use of our YD6902ES-EXT adapters. - USB interface for three virtual COM-ports: – YD.Command ** – LocoNet – XpressNet The USB connection can also be used to update the YD7010`s firmware - Full network capabilities: – WiFi Access Point, gives direct access to smartphones, tablets and handheld controllers – 100baseT RJ45 wired network socket, connect and bind to your home network and reliably connect your PC software - By means of the built in YD9401 Module which provides: – 6 different but SIMULTANEOUS usable network protocols on WiFi and LAN: * XpressNet-LAN, * Z21®, * LocoNet Binary, * LocoNet LBServer, * JMRI: WiThrottle * YD.Command ** - Booster Interface by LocoNet-B with strong, 800mA LocoNet RailSync signals - Handcontroller, feedback modules etc. interface by LocoNet-T with strong, 800mA 12VDC power supply - Powerful 1 Amp XpressNet supply - Roco R-BUS compatible feedbacks on XpressNet socket - Roco B-BUS for compatible boosters on RJ10 socket - Lenz RS-BUS compatible feedbacks - Infra-Red sensor for the use of IR-based remotye controllers like the Uhlenbrock IRIS or the Piko DigiFern - Clear LED indicators - Programming: – POM write – Service Mode ( programming track ) – ES-Link capable modules like YD8044, YD8008, YD8116, YD6016ES, YD7403 - Additional extra purchasable , quality made, YaMoRC spec, switch mode power supply with choise of: – 15V fixed / 4 A – 18V fixed / 3.3A **) Disclaimer: YD.Command is the internal YaMoRC communication protocol. It is not publicly open, nor does YaMoRC supply support 3rd parties to use it. Futher can it be subject to change on demand and at will of YaMoRC, without further notice or explanation.

Regular price: CHF 255.00

On order, shipped within 3-8 days

DCC booster, 3.5 A
YaMoRC YD7403
DCC booster, 3.5 A

The YD7403 is a pure DCC booster with 3.5 A peak current and 2.75 A continuous current, which passes the RailCom cutout of the input signal to the output. The LocoNet B, Roco B-Bus, CDE and Track Sniffer inputs are galvanically isolated, the active signal source is automatically selected and indicated by an LED. The booster can be switched on and off and reversed via a DCC accessory address and reports its status via LocoNet. Short circuits are reported via LocoNet, CDE or B-Bus. Configuration is carried out via ES-PGM Link, for example with the YD9100. The power supply is provided by a DC voltage power supply unit with 15 to 19 V. Output 3.5 A peak, 2.75 A continuous Input 15 to 19 V DC, max. 60 W Short-circuit proof Body 84 x 88 x 22 mm

Regular price: CHF 107.00

On order, shipped within 3-8 days

Switched-mode power supply, 18 V DC, for booster and central station
YaMoRC YD7460-18
Switched-mode power supply, 18 V DC, for booster and central station

The YD7460-18 is a switched-mode power supply providing 18 V DC voltage and 3.3 A for YaMoRC digital central stations and boosters, for example the YD7010 or YD7403. For the turntable control YD7652, it is recommended as the power supply in the manual. The power supply is double-insulated (protection class 2), short-circuit and overload protected, and does not heat up when the central station or booster is idling. It has a compact design and a two-core low-voltage cable instead of a thin coaxial cable. It was manufactured in accordance with the manufacturer's specifications to suit the YaMoRC boosters and central stations. Output 18 V DC, 3.3 A Safety class 2 Short-circuit and overload protection

Regular price: CHF 37.50

On order, shipped within 3-8 days

Network/Wi-Fi upgrade module for DR5000
YaMoRC YD9401
Network/Wi-Fi upgrade module for DR5000

The YD9401 is a retrofit module that replaces the RM04 WLAN/LAN module of the Digikeijs DR5000 digital central station. Together with the associated firmware, the DR5000 is converted into a YD7001 central station. The module provides a WLAN access point without an external router, a 100baseT LAN connection, and a built-in web server for configuration in a browser. The XpressNet-LAN, Z21, LocoNet Binary, LocoNet LBServer, and WiThrottle protocols can be used simultaneously via WLAN and LAN. The installation can be carried out by the user; a licence key must be requested by email to activate the module. Opening the DR5000 voids the Digikeijs warranty. Replacement for the DR5000 RM04 module WLAN access point and 100baseT LAN Configuration via web browser Installation requires: Windows PC, USB cable, cross-head screwdriver

Regular price: CHF 64.00

On order, shipped within 3-8 days

DCC digital command station based on DR5000, revision E
YaMoRC YD7001-E
DCC digital command station based on DR5000, revision E

The YD7001-E is a pure DCC digital command station with a 3 A output current and RailCom support. It is based on a brand-new, revised DR5000 main board with a pre-installed YD9401 network module, and it additionally measures input and track voltage. It controls up to 117 locomotive addresses and 2048 accessory addresses and supports DCCext. Connections: LocoNet T and B, XpressNet, Roco B-Bus, RS-Bus, S88 ES-Link, a fully functional programming track, USB, LAN and WLAN access point. In the network, the Z21, WiThrottle, LocoNet and XpressNet protocols are available. An IR receiver allows remote controls such as Uhlenbrock or Piko DigiFern. Formats such as mfx and Motorola are not supported. Track output 3 A Power supply 15 to 19 V DC, max. 3.5 A Programming track max. 750 mA Housing 157 x 88 x 22 mm

Regular price: Price to follow