Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rolling Stock

Locomotives, multiple units, coaches and wagons, new and pre-owned, from Z to G, checked by modellers.
Filter products
RhB Bt 528 08 universal driving trailer, bright red
BEMO 3298118 Scale H0m
RhB Bt 528 08 universal driving trailer, bright red

With the acquisition of modern articulated railcars for the Albula line, the RhB is continuing the renewal of its rolling stock. The originally six-part Albula articulated railcars (AGZ) were subsequently supplemented with first-class driving trailers At 578 01-06 in a matching livery. In addition, the second-class, red-painted universal driving trailers Bt 528 01-08 were put into service. They can be driven together with the Ge 4/4 II or Ge 4/4 III locomotives as well as the "Allegra". Spare parts 5009 079 Wheel set 7.9 mm H0e (10 pcs) 5209 079 Wheel set 7.9 mm H0m (10 pcs) 5009 093 Wheel set 9.3 mm H0e (10 pcs) 5209 093 Wheel set 9.3 mm H0m (10 pcs) 5300 175 Standard coupling AHA (10 pcs) 5400 175 Close coupling adapter (10 pcs) 5344 100 Standard coupling, cab end (10 pcs)

Regular price: CHF 116.25

In stock: 1 on the shelf, shipped within 1-3 days

RhB B 574 01 AGZ intermediate coach with interior lighting
BEMO 3298142 Scale H0m
RhB B 574 01 AGZ intermediate coach with interior lighting

RhB Albula articulated railcar (AGZ) With the acquisition of modern articulated railcars for the Albula line, the RhB is continuing the renewal of its rolling stock. A 7-part air-conditioned formation consists of one driving trailer Ait 578, one A 570 and one AB 572, as well as the four second-class coaches B 577 (with a leisure and family compartment featuring a children's play corner), B 573, B 574 and the Bi 576 with a photo compartment featuring special panoramic windows. At first, the trains ran for a considerable time without a driving trailer on the Albula line. The locomotives are mainly Ge 4/4 III, but also "Allegra" dual-system railcars. Spare parts 5009 079 Wheel set H0e (10 pcs) 5209 079 Wheel set H0m (10 pcs) 5300 175 Standard coupling AHA (10 pcs) 5400 175 Close coupling adapter (10 pcs) 4798 000 1 Detail parts, end coaches only, 3298 10x/16x

Regular price: CHF 116.25

In stock: 1 on the shelf, shipped within 1-3 days

RhB Bi 576 01 AGZ photographer's coach with interior lighting
BEMO 3298162 Scale H0m
RhB Bi 576 01 AGZ photographer's coach with interior lighting

Albula articulated train (AGZ) of the RhB With the acquisition of modern articulated trains for the Albula line, the RhB continues the renewal of its rolling stock. A seven-section composition of air-conditioned coaches consists of a driving trailer Ait 578, an A 570 and an AB 572, as well as the four second-class coaches B 577 (with leisure and family compartment with a children's play corner), B 573, B 574 and the Bi 576 with a photographers' compartment with special panorama windows. At first, the trains ran for a long time without a driving trailer on the Albula line. The train locomotives are primarily Ge 4/4 III, but also "Allegra" dual-system trains. Spare parts 5009 079 Wheelset H0e (10 pcs) 5209 079 Wheelset H0m (10 pcs) 5300 175 Standard coupling AHA (10 pcs) 5400 175 Close coupling adapter (10 pcs) 4798 000 1 Detail parts, end coaches 3298 10x/16x only

Regular price: CHF 118.00

In stock: 1 on the shelf, shipped within 1-3 days

RhB B 577 01 AGZ leisure coach with interior lighting
BEMO 3298172 Scale H0m
RhB B 577 01 AGZ leisure coach with interior lighting

Albula articulated train (AGZ) of the RhB With the acquisition of modern articulated trains for the Albula line, the RhB continues the renewal of its rolling stock. A seven-section composition of air-conditioned coaches consists of a driving trailer Ait 578, an A 570 and an AB 572, as well as the four second-class coaches B 577 (with leisure and family compartment with a children's play corner), B 573, B 574 and the Bi 576 with a photographers' compartment with special panorama windows. At first, the trains ran for a long time without a driving trailer on the Albula line. The train locomotives are primarily Ge 4/4 III, but also "Allegra" dual-system trains. Spare parts 5009 079 Wheelset H0e (10 pcs) 5209 079 Wheelset H0m (10 pcs) 5300 175 Standard coupling AHA (10 pcs) 5400 175 Close coupling adapter (10 pcs) 4798 000 1 Detail parts, end coaches 3298 10x/16x only

Regular price: CHF 118.00

In stock: 1 on the shelf, shipped within 1-3 days

MOB Bs 236 low-floor coach "GoldenPass"
BEMO 3299346 Scale H0m
MOB Bs 236 low-floor coach "GoldenPass"

Low-floor coach As part of the Equal Opportunities for People with Disabilities Act, the MOB acquired a total of eight low-floor coach bodies from Raility, Biel, in 2010/11, running on bogies made by Alstom, with the interior fitted out in the railway's own workshop in Chernex. The coaches, designated Bs 231-238, with a central swing-sliding door in the low-floor area and a disabled-accessible toilet, are now part of many train formations. During their more than 10 years in service, they have received various liveries. The panoramic coaches can additionally be fitted with the LED interior lighting, item no. 6549 000. Spare parts 5009 000 Wheel set H0e (10 pcs) 5209 000 Wheel set H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 5599 300 Bogie side frame (2 pcs) 4799 000 1 Detail parts

Regular price: CHF 106.95

In stock: 1 on the shelf, shipped within 1-3 days

H0 Express Train Locomotive BR 01 DRG
Brawa 40955 Scale H0
H0 Express Train Locomotive BR 01 DRG

Prototype The Cologne Reichsbahn directorate did not receive the 01 192 – 198 locomotives for operations along the Rhine until 1936/1937, which was very late indeed. 01 193 was phased out on 21.12.1936 and assigned to the Deutzerfeld railway depot. The area of responsibility for the locomotive included the route of the legendary “Rheingold-Express”, assumed from the BR 18.5. As early as 1930, the Offenburg railway depot operated it with an 01 vehicle along the Upper Rhine to Basel. The 01 193 also survived the war in Cologne and moved to Hamm in 1948. Here, it operated on the East-West axis between Aachen and Hanover with numerous sister locomotives until 1959 and was then transferred to Paderborn. A new high-performance boiler was installed in Nied in 1960. In 1964, it was passed on to Rheine after only five years. As was the case with trains starting in Paderborn, it turned in Kassel and travelled north to Bremen, Emden and Oldenburg. The “Rheiner 01” vehicles were often installed with a 2´2T30 Tender for utilisation in The Netherlands. The increasing allocation of the 01.10 meant that the 01 became expendable, the 001 193-2 was decommissioned as early as 21.06.1968. Gustav Ahrens GmbH dismantled it in Essen-Rellinghausen in September and October 1969. Model Boiler, driver's cab and tender made of high-quality, impact-resistant plastic Perforated underframe and spoked wheels in die-cast zinc Smoke generator and sound decoder, either built in or as a retrofit option Illuminated driver's cab True-to epoch lighting, multipart lamp housing Standard shaft rear with link guide Close coupling between locomotive and tender Perfectly replicated back boilerplate Fine paintwork and painting Lines and extra mounted parts in minimum material thickness Extra mounted steps 1000 mm leading wheels Navigable minimum radius: The models of BR 01 are technically suitable for R 360. For best driving characteristics we recommend the use on R 420.

Regular price: CHF 568.50

In stock: 1 on the shelf, shipped within 1-3 days

H0 Diesel Locomotive BR 216 H.F. Wiebe
Brawa 41186 Scale H0
H0 Diesel Locomotive BR 216 H.F. Wiebe

LED lighting Extra mounted windscreen wiper New true to original gearbox Improved power consumption Etched front steps New with NEM-standard short-coupling Buffer screed & roof in more detail Driver's cab light New motor PluX22 interface D&H sound

Regular price: CHF 261.65

In stock: 1 on the shelf, shipped within 1-3 days

H0 Diesel Locomotive BR 362 DB AG
Brawa 42412 Scale H0
H0 Diesel Locomotive BR 362 DB AG

Available for direct and alternating current Etched radiator grille Free-standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Reproduction of the brake linkage Metal frame and wheels, structure made of plastic NEM-standard short coupling Light change Equipment Digital Version EXTRA (DC + AC) Filigree electronic coupling (interchangeable thanks to NEM standard) Incl. energy storage (buffers sound, motor and light) Comprehensive light functions, flicker-free light provided by a separate capacitor Range-specific original sound with the latest sound technology Optimal motor and load control for perfect running characteristics Compatible with all common digital systems Driver cabin light

Regular price: CHF 270.65

In stock: 1 on the shelf, shipped within 1-3 days

H0 TRAXX Electric Locomotive BR 146.5 DB AG (Leipzig Hbf)
Brawa 43809 Scale H0
H0 TRAXX Electric Locomotive BR 146.5 DB AG (Leipzig Hbf)

Prototype New, stricter safety specifications forced Bombardier to increase the crash safety of the TRAXX 1 locomotive body. As a result, the TRAXX 2 locomotives that have been manufactured since 2005 boast a ver tical front section at the bottom as well as altered shunting treads on the fronts. Many components inside the vehicle were also simplified and standardised in order to be able to respond to customer desires in a more flexible manner whilst also reducing in-house production work. For instance, the time for the final assembly of a TRAXX locomotive has been reduced to a maximum of two weeks. In order to also be able to distinguish them in terms of their fleet number, the locomotives have been issued with the subclass numbers 185.2 and 146.2 to 146.5 at Deutsche Bahn AG. In the meantime, Bombardier has globally produced over 1500 units of this highly successful TRAXX family. Model Attached grip rails (head end) Illuminated train destination display Top-quality printing and painting Driver's cab lighting Prepared for sound, or with sound installed Etched treadplates Incl. snowplough LED lighting Windscreen wipers attached individually Different design of the train compartments PluX22 interface Driver's cab lighting switchable like the original Long-distance headlights raise like the original Smooth, steady setting off even at speed level 1 Setting off and braking delay like the original Optimal power consumption Chassis with free view and details true to the original Simple, cable-free dismantling of the housing possible as well as non-twist locking lugs Roof sections true to the different versions with 2 or 4 pantographs True-to-original rest position of the pantographs Metal frame

Regular price: CHF 433.10

In stock: 1 on the shelf, shipped within 1-3 days

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "AEG" DB
Brawa 49628 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "AEG" DB

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car "Brauerei Aldersbach" DRG
Brawa 49814 Scale H0
H0 Beer Car "Brauerei Aldersbach" DRG

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Schartner Bombe" ÖBB
Brawa 49831 Scale H0
H0 Covered Freight Car G10 "Schartner Bombe" ÖBB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 DB
Brawa 49875 Scale H0
H0 Covered Freight Car G10 DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car "Alpirsbach" DRG
Brawa 49879 Scale H0
H0 Beer Car "Alpirsbach" DRG

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Lw SNCF
Brawa 49888 Scale H0
H0 Covered Freight Car Lw SNCF

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car G10 "Kaiser Bier" ÖBB
Brawa 49891 Scale H0
H0 Beer Car G10 "Kaiser Bier" ÖBB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Stihl" DB
Brawa 49893 Scale H0
H0 Covered Freight Car G10 "Stihl" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "UGILOR" SNCF
Brawa 50053 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "UGILOR" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car SCwf 2-axle "Paul Millet" SNCF
Brawa 50054 Scale H0
H0 Lightweight Tank Car SCwf 2-axle "Paul Millet" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "SIMOTRA" SNCF
Brawa 50055 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "SIMOTRA" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Glt23 "Goggo Motorroller" DB
Brawa 50462 Scale H0
H0 Covered Freight Car Glt23 "Goggo Motorroller" DB

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Glr22 "Westfalia" DB
Brawa 50488 Scale H0
H0 Covered Freight Car Glr22 "Westfalia" DB

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

In stock: 1 on the shelf, shipped within 1-3 days

H0 Container Car Ucs908 "akw" DB AG
Brawa 50571 Scale H0
H0 Container Car Ucs908 "akw" DB AG

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

In stock: 1 on the shelf, shipped within 1-3 days